- Overview
- More Info
- Reviews
- Videos
New and Improved! Now with lower profile and wider jaw for more stability!
Wide lever handles and a click-lock sliding jaw make it simple to position and secure
these clamps for use as a straight edge guide for circular saws and routers and as a
fence for your table saw or drill press. A very low 9/16" profile body and flat top allow
many applications without obstructing tools. Easy-to-read full color measuring scales
enable outstanding accuracy anywhere along the clamp. Onboard T-Tracks fit select
clamp accessories, sold separately. Rigid, lightweight construction makes these clamps
a joy to operate. Each clamp is 2-17/32" wide.
Contractor Saw Plate and Contractor Router Plate, Stop Block and Squaring Attachment sold separately.
Customer Reviews and Photos for:
All-In-One Low-Profile Contractor Clamps, New & Improved!
|
Average Rating:
3.8
(52 customer reviews)
$45.99
Add your review...
|
|
|
1) Submitted by
Dennis, from Gaffney, SC
on 8/11/2012
Customer Rating: 
I purchased the 50 inch model and have used it several times. It does what is advertised to do and I have no complaints with it. I am not the most accurate free lance circular saw user when trying to follow a line to be sure, so this was just what someone like myself needed. I have had no trouble with the clamps holding it once in position setup is simple. I am sure judgeing by what I can do with my circular saw that a router would be no problem either. I would recommend this item to someone like myself, who can use some help with a straight cut especially with a large project using sheets of plywood.
|
|
2) Submitted by
Kat, from Memphis, TN
on 5/11/2012
Customer Rating:
I was debating between buying a table saw or a miter saw and ended up getting the straight edge to use with my circular saw and it is awesome. Now I can cut long straight cuts and don't have to worry.
|
|
3) Submitted by
Barry, from Dallas, TX
on 2/9/2012
Customer Rating:
I have the 50" and 99" versions and am happy with both of them. They are straight and low enough profile to not interfere with whatever saw or router you're using. The adjustment for the clamping mechanism is a big finicky the reason for 4 vs. 5 stars, but I got the hang of it after a few tries. I've had good luck using spring clamps on the ends to hold the guide in place while I line it up, and this also helps with the adjustment and with warped sheet goods. Once the internal clamp is engaged, the spring clamps can be removed, and the guide is nice and stable. Having said that, I wouldn't use these in place of a bar or pipe clamp, as they really aren't robust enough to apply the amount of pressure needed for a good glue joint. I haven't had any issues with parts breaking or the rod getting damaged, even though I don't baby them.
|
|
4) Submitted by
Devin Oltmanns, from Beaverton, OR
on 8/12/2012
Customer Rating: 
This tool is OK, the one BIG problem is the sliding jaw gets held up by the markes on the rod. If rod was made with a better metal rod it would be a great tool.
|
|
5) Submitted by
Mike, from Mankato, MN
on 7/21/2011
Customer Rating:
Excellent tool for doing a straight cut across a 4x8 sheet of plywood. I set it so my circular saw slides along it's side. Works perfectly.
|
|
6) Submitted by
Eric, from Ogden, UT
on 7/15/2011
Customer Rating:
I'm very pleased with the design and function of this product. The variable clamp pressure, sturdy design, and surface smoothness are appreciated.
Only three minor shortcomings. Paucity of directions, far clamp is slightly awkward to tighten, and it is made to only cut straight edges rather than angles.
|
|
7) Submitted by
Thomas Roderick, from Blomkest, MN
on 6/20/2011
Customer Rating:
I have had the shorter version for several of years, and knew I wouldn't be disappointed with this one. Now I'm able to cut down 4x8 sheets in a straight line without manhandling them on a table saw or spending big bucks on a panel saw! Highly recommended either by itself or in the 3-piece set.
|
See all
52 reviews...
|
Home  Shop Essentials Workbenches, Vises, Shop Stands Workbench Clamps and Vises All-In-One Low-Profile Contractor Clamps, New & Improved! 
|
(1)
