Home Wood Products Hobby Kits and Small Wood Parts Small Hobby Kits and Parts Stainless Steel Pizza Cutter Turning Kit, Chrome Finish


Only at Rockler Stainless Steel Pizza Cutter Turning Kit, Chrome Finish

Stainless Steel Pizza Cutter Turning Kit, Chrome Finish

$19.99Each   Scoll Down to Order
Currently In Stock


Average Rating: Customer Review Rating: 4.4  (21 customer reviews)


See More Images
Rockler Advantage


Cut pizza quickly and easily Durable cutter hardware includes a 5/16'' threaded insert Make a creative handle to complete your kit

  • Overview
  • More Info
  • Reviews
Bookmark and Share  
Cut any pizza quickly and with ease! Robust, well-balanced hardware 3X the weight of competing cutters and a sharp 4" diameter stainless steel blade make this kit a must have for pizza lovers. Simply make your own creative handle (not included) to complete your cutter with personalized flair. Kit includes a 5/16" threaded insert to attach the handle and to remove it for dishwasher cleaning. Patent pending. Also available in a brass finish.

See our complete line of Turning Stock to complete your project.

Bookmark and Share  
Methods to consider for installing the threaded insert are:

Use a 5/16” bolt and double nuts on a drill press. Cut the head off a 5/16” bolt and chuck it in a drill press. Then thread on two nuts and the insert so that it is flush with the end of the bolt. Tighten the two nuts on the insert so it won’t spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. DO NOT TURN ON THE DRILL PRESS. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert.

This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock.

And finally, if you’re using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.

 
Bookmark and Share  

Customer Reviews and Photos for:
Stainless Steel Pizza Cutter Turning Kit, Chrome Finish

Average Rating:
Customer Review Rating: 4.4
4.4
(21 customer reviews)
$19.99

Add your review...
1) Submitted by Adam, from Harbor Beach, MI on 12/22/2012
Customer Rating: Customer Review Rating: 4.0

This is an excellent pizza cutter. The weight is perfect. I purchased the stainless steel kit and it turned out great. Matched it with a cocobolo handle looks great. Would have gave it an excellent rating, but needs to come with a cover/sleeve for storing when not in use.
2) Submitted by Jared, from Harrisburg, PA on 10/23/2012
Customer Rating: Customer Review Rating: 5.0

Excellent product, super duty pizza cutter. The size and weight make this product second to none. This is NOT your average pizza cutter. I have made 2 and would highly recommend this to anyone. I took a different approach in design, creating a template for handle and used router. I also had issue with splitting the wood due to drilling incorrect pilot hole for insert. I was able to use grinder to grind away some of the threads and used epoxy to secure. If you're reading this, just buy it!
3) Submitted by John Bixby, from Eujfaula, OK on 7/28/2012
Customer Rating: Customer Review Rating: 5.0
Really heavy duty cutter. Only one problem. The instructions say drill 1/2" hole for threaded insert for hardwood. Used hard maple and it split when I inserted the piece. Remade the handle and drilled with 12.5mm bit and cured problem. Otherwise it's a great kit, instructions need to be amended.
4) Submitted by Larry McClean, from Eau Claire, WI on 6/26/2012
Customer Rating: Customer Review Rating: 5.0

Exceeded my expectations....ordered 4 more so my children each could have/make one.
5) Submitted by Louis Noborini, from Marlborough, MASSACHUSETTS on 11/30/2011
Customer Rating: Customer Review Rating: 5.0
One word describes this "WOW". It is massive and have not cut a pizza with it yet but by the weight and the size of the cutter wheel it should be a treat to use it. Nothing like you would ever see in even the most expensive stores high end kitchen utensil stores. My buddy owns a resturant and has an extensive pizza menu. He doesn't know he is getting one from me for
x-mas but he did say that a good pizza cutter is major requirement especially if you make them for a living. He has not seen this yet and I know he will just love it. OK with the good comes a little bad. My first one I made I used olivewood wouldn't think of using anything but a nice piece of olive wood well the insert was not really easy to install in the new handle and caused it to crack. I bought the correct drill size as instructed in the directions 15/32". I think it should be a bit larger OR better yet have a tap available for this size insert. This is what I ended up having to do in order to minimize the crack in the handle. I was just fortunate enough to have a collection of taps. I just found a size that was close to the insert size. I did butter up the insert with cutting lubricant and soap to assist and that helped a lot. The directions need to be worked on a little with maybe some diagrams as well. I will be making more of these, in fact I already another one and will be heading back to Rockler for some more.
PS: I like the deal with the $1.00 more and you get the ice cream scoop.
6) Submitted by Tommy Hynds, from Dripping Springs, TEXAS on 10/29/2011
Customer Rating: Customer Review Rating: 5.0
A really great item. Works great at cutting all kinds of things & cuts easily. Would recommend to anyone.
7) Submitted by LewisKauffman, from Chambersburg, PA on 8/6/2011
Customer Rating: Customer Review Rating: 5.0
Well made. Will make more of these for family gifts.
See all 21 reviews...
 
Order this Item
Cutter:
Quantity Item Number Item Stock Status Price
34913 Pizza Cutter Blade Kit
In
Stock 		$19.99 Each
Wood Turning Stock Sold Separately:
Quantity Item Number Item Stock Status Price
21106 Olivewood Turning Blank, 1-1/2'' x 1-1/2'' x 6''
In
Stock 		$6.99 Each
27299 Pink Ivory Turning Blank, 1-1/2'' x 1-1/2'' x 6''
In
Stock
Online Only 		$8.99 Each
Additional Accessories (Sold Separately):
Quantity Item Number Item Stock Status Price
25291 15/32'' HSS Standard Brad Point
In
Stock
Online Only 		$8.19 Each
43469 Pizza Cutter/Bottle Opener Turning Mandrel
In
Stock 		$10.49 Each



Home Wood Products Hobby Kits and Small Wood Parts Small Hobby Kits and Parts Stainless Steel Pizza Cutter Turning Kit, Chrome Finish
Locate Your Nearest Rockler Store

"I just purchased the shelf pin jig. It works great and is so simple. One of the best tools for the money that I have."
- ken - 01/11/2013
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web2