- Overview
- More Info
- Reviews
Wide lever handle and a click-lock sliding jaw make it simple to position and secure
this clamp for use as a straight edge guide for circular saws and routers and as a fence
for your table saw or drill press. 99" length makes it a snap to rip sheets of plywood
and other large materials. A very low 9/16" body profile and flat top allow many
applications without obstructing tools. Easy-to-read full color measuring scales enable
outstanding accuracy anywhere along the clamp. Onboard T-Tracks fit select clamp
accessories, sold separately. Rigid, lightweight construction makes this clamp a joy to
operate. 2-17/32" wide. This is a "C" Contractor Series Clamp.
Please note: Due to size, this item cannot be shipped to a P.O. Box and a street address is required.
Customer Reviews and Photos for:
99'' All-In-One Low Profile Straight Edge Clamp
|
Average Rating:
4.4
(36 customer reviews)
$113.99
Add your review...
|
|
|
1) Submitted by
Tom Hisgen, from Rexford, NY
on 7/21/2011
Customer Rating: 
Looking for a straight edge for some Black Walnut boards that I had milled from a tree I cut.They were 8ft long.
I order the 99" straight edge and found out I needed the saw plate for the thing, so I ordered it a day later. Bottom line the straight edge was just what I wanted & the saw guide worked great to. Had to drill a couple of holes in the plate of the saw but it was worth it. Highly recommend this clamp.
|
|
2) Submitted by
Joe Ingrahm, from Baton Rouge, LA
on 2/7/2011
Customer Rating:
I needed to rip a full length of plywood and do not have the space with my table saw. This worked beautifully even with 1/2'' plywood which had more risk of bending. Would highly recommend it.
|
|
3) Submitted by
Dewey Lackey, from Brentwood, TENNESSEE
on 2/6/2011
Customer Rating:
After using the 54" Low Profile Straight edge clamp, I ordered the 99" clamp to use on large sheets of plywood and MDF board. We recently used the 99" clamp in building a bookcase from plywood and in ripping MDF board for a workbench top. It is a positive addition to my workshop, eliminating the need to muscle large sheets of material through the table saw. I highly recommend this clamp.
|
|
4) Submitted by
Paul Fletcher, from Indianapolis, IN
on 5/13/2012
Customer Rating:
I bought this 99” All-In-One Low Profile Straight Edge Clamp about a year ago from Rockler Online. After buying it, I looked at it and wondered, “Now, why did I buy that and for what will I ever use it?" Well, we never know. My adult daughter, Deborah, who does woodworking with me in my shop, volunteered to make trim for the interior of our home, using our shaper. The trim was chair rails, crown molding, etc. With the help of a friend, I bought a significant quantity of kiln-dried poplar by the board foot, from an Indiana sawmill. It had to be milled in every way: Thickness planed, then, cut into eight foot long boards on the miter saw. One big problem remained. The boards had no straight edges. One edge on the length of each board had to be made straight by use of the table saw. How to do it? I attached the 99” All-In-One Low Profile Straight Edge Clamp to the straighter of the two edges, let it hang over the edge just a tad, squared it with the ends, and clamped it down firmly. We then ripped the board, guiding the Clamp along the fence, cutting a straight edge on the opposite side of the board. Worked like a charm on every board. I highly recommend the 99” All-in-One Low Profile Straight Edge Clamp…if you need one. And you very well may.
|
|
5) Submitted by
Robert Schlieman, from Baltimore, VT
on 2/3/2011
Customer Rating: 
I have this tool because I don't have a panel saw yet!
It's very ridgid for it's length and locks down tight.
I use it on metal and wood. The built in T tracks enable me to attach my plasma cutter jig to it for straight clean cuts on sheet metal. the only flaw I could see is the lock lever, it's on the end and its plastic so we are carefull swinging it around the shop. Awesome Tool
|
|
6) Submitted by
Mike Stewart, from Palestine, TEXAS
on 1/29/2011
Customer Rating:
I found this product worked wonderfully well. As with any long cut/rip use a sharp blade and do not force the cut in any direction and there will be no warp or deflection. The tool is substantial enough that it does not bend or warp under normal use. Great for cutting large plywood sheets without wrestling them through the table saw. I used the 99" straight edge clamp with a kreg Jig to build a book case. Love it.
|
|
7) Submitted by
Jim, from Beaufort, SC
on 1/19/2011
Customer Rating:
I planned on using this to rip sheets of plywood for a Murphy bed but decided to use the table saw and hope for the best. Table saw worked great so I haven't used this clamp yet but I own the 24 and 54 inch clamps and they are great so I expect the same from this one when I do use it.
|
See all
36 reviews...
|
Home  Shop Essentials Workbenches, Vises, Shop Stands Workbench Clamps and Vises 99'' All-In-One Low Profile Straight Edge Clamp 
|
(0 Items)
