Customer Reviews and Photos for:
Kreg Jig K4MS Master System with $15 Rebate! Limited Time Only!
|
Average Rating:
4.7
(22 customer reviews)
$139.00
Add your review...
|
|
|
1) Submitted by
James, from Dallas, TX
on 3/4/2013
Customer Rating: 
I am a beginner wood worker and have used this to help me build a work bench, and a night stand. It worked flawlessly.
|
|
2) Submitted by
Dennis M. Fish, from Bend, OR
on 6/15/2012
Customer Rating:
This is a great tool! I use it all the time and it really helps putting wood together fast and strong. It saves me so much time and wish I would have purchased one years ago. Buy the big set and you won't be sorry.
|
|
3) Submitted by
Mitch, from Marietta, GA
on 6/20/2011
Customer Rating:
I think I have every pocket hole clamp and accessory Kreg makes and have had a great deal of fun using them. I was excited when I first saw it on the New Yankee workshop and rushed out to get one. I have over the years built several projects with the jig and have loved every minute. However that being said there are a couple of things the new user should be aware of. 1. If you use glue on your projects be aware it not only serves to strengthen the project, In the beginning it will act as a lubricant and make getting your joints flush Difficult. 2. If your want perfect joints clamp, clamp ,clamp. The force of the screws WILL force the piece out of alignment. Beyond that get one of these and build your little heart out !
|
|
4) Submitted by
Brett, from O'Fallon, IL
on 6/20/2011
Customer Rating: 
This was truely easy to set up and use. It took me about 30 seconds to review the paper instructions, still haven't watched the DVD. I would recommend this product if you want uniform and strong holes pocket holes.
|
|
5) Submitted by
Don Strickland, from Clayton, NC
on 6/11/2011
Customer Rating:
I had been looking at this product for quiet awhile and when it went on sale, I thought I would try it...This jig is everything it says it is...It is first class quality all the way...Everything fits so presice and is well constructed..I also purchased the Kregbench clamp system and it is well worth the money.
|
|
6) Submitted by
Wes, from The Woodlands, TX
on 6/10/2011
Customer Rating:
Excellent quality. Highly recommended. My wife and I used the pocket hole system to build our first solid wood furniture cabinet under flat screen TV. It could not be easier to use but here are some hints:
1 Read the paper instructions inside the DVD packet. It's much quicker than navigating the DVD.
2 Proper set-up is required or the tip of your drill will run into the base of the jig. See item 1.
3 Plan on mounting this jig to something more stable as it requires multiple hands when using large work pieces.
4 Use coarse thread screws for soft wood #8 x 1-1/4" long for 3/4" thick boards
|
|
7) Submitted by
Ken Woelfer, from Middle River, MARYLAND
on 5/22/2011
Customer Rating:
I've been wanting to buy one of these for a while, and finally did for a present project. Excellent tool, very sturdy and durable. However, I'm still trying to figure out what some of the parts do, and as such, the instructions and video could be more detailed.
Ken Woelfer
|
|
8) Submitted by
Joe LeBeau, from Janesville, WI
on 5/22/2011
Customer Rating:
Not the full size kit but has enough to get most face frames completed.
|
|
9) Submitted by
Randy, from Kansas City, MO
on 5/4/2011
Customer Rating:
This system works great. Adjust your drill/driver for the proper torque, and the screws draw the joint tight.
|
|
10) Submitted by
Mike and Abbi, from Fostoria, OH
on 3/30/2011
Customer Rating:
My 13 yr old daughter and I just got finished building our router table. The entire cabinet and all the drawers were built using pocket screws. Great product. And the Kreg system is great too lol.
|
|
11) Submitted by
Jack Leblond, from Pflugerville, TX
on 1/17/2012
Customer Rating:
I've been seeing these pop-up on all the DIY shows for a while and finally decided I had to have one. For first project I used it on 2x4 frame for a tool stand - I was amazed at how strong the joints were. Since this rating/comment is for the "master kit" I can only give four stars - but only because the amount of screws they include just ridiculous. A small quantity of a few lengths and types. If you buy this - also buy screws. The tool works great - you will not be disappointed.
|
|
12) Submitted by
James Waldrop, from Chesapeake, VA
on 3/27/2011
Customer Rating:
My 12 yr. old son recently needed a puppet theater to present a show for his science class.
Using the K4MS my son drilled over 200 pockets and drove every screw to complete the frame for a 4ft. wide
x 5 1/2 ft. tall by 15 inch deep Puppet Theater.
Together we were proud to donate it to his school.
Now they can put on a puppet show any time the kids
want.
Proud Dad
|
|
13) Submitted by
S from IN
on 9/3/2012
Customer Rating: 
Jig with clamping base is great. Not sure of the $$ vs value for it. Re-purchasing I would choose the $99 version. Works as advertised, although not noted you can use non-kreg screws in it as I have done all weekend long so far. Overall, good for pocket holes in the shop environment not so good in the field for me. Here is my gripe - says you have the ability to take the guide portion or the included micro to the field. Yeah but only if you can securely clamp it and they don't include enough spacers to quickly set it up for 1.5". You have to cut a piece. Seriously - that price for plastic and some metal guides embeded and then can't include the spacers to make it field ready for what it is bench ready for!!! No clamp, no fun is what I found trying to pocket hole on a 12 wide by 1.5 inch thick board into a 1 inch board and no way to clamp it. In the end - I tossed the mini-jig as it was useless, I built my own hold down so the jig wouldn't ride up without the clamp, and did what I needed to do.
|
|
14) Submitted by
Pete, from Nanticoke, PA
on 3/27/2011
Customer Rating:
I've used this jig in several applications where everything else failed, works excellent. Good strong joint expecially when it's impossible to clamp.
|
|
15) Submitted by
D.Tenpas, from Poquoson, VA
on 3/19/2011
Customer Rating:
After years of using a metal block with a 5/16 hole drilled at 15 degrees & using a C Clamp I was able to almost get the hole in the right place. with this Kreg Jig K4MS I am able to get it right every time in about 1/4 the time. I used it first to repair a chair and the results were a strong joint without a load of clamps. I am looking forward to my next project. No shop should be without this tool.
|
|
16) Submitted by
John Downing, from Amherst, NH
on 1/19/2011
Customer Rating:
I first used this kit while adding framing to the metal building that is now my woodworking shop. The pocket holes and screws allowed me to add intermediate frame members safely and accurately. Next, I will us it to build my storage cabinets. It is an excellent system.
|
|
17) Submitted by
Douglas Brickey, from sparks, NV
on 1/2/2011
Customer Rating:
I used the jig to repair a dining room chair. It was just what I needed to do the job. I had tried to repair the chair with screws and glue and it did not last. This should be a permanent fix.
|
|
18) Submitted by
Kevin Provencher, from King George, VA
on 12/21/2010
Customer Rating:
I have been eyeing this kit for a long time. I decided to purchase it to assist with the building of magazine rack lamp stand for Christmas gift. I used it on the face frame and it was amazing how solid it is. No gaps in the joints, it pulled everything tight. This saved a lot of time and now has me thinking that I will use it to complete more of the assemble which remains.
|
|
19) Submitted by
Gary Stoh, from Beaumont, CA
on 12/18/2010
Customer Rating:
I have considered buying the Kreg pocket jig for a long time and finally deceided to order one. When I received the K4 Master System, I read the instructions, and watched the enclosed video. The first time I used it the results were outstanding. It is easy to set up and even easier to use. I've used biscuits and dowels in the past but nothing is easer or produces the results that I've achieved with the K4 right from the box. Great tool.
|
|
20) Submitted by
Jim Shay, from Sayre, PA
on 12/13/2011
Customer Rating:
Works AS ADVERTIZED !!!!!!!....and as an added feature....Could not find "Made in China" anywhere on the jig.
|
|
21) Submitted by
David Olejarz, from Glenshaw, PA
on 4/5/2012
Customer Rating:
My only negative comment is I never received my $15 rebate from Kreg when I purchased the Master kit.
|
|
22) Submitted by
Spud Laffoon, from Earlham, IA
on 12/9/2010
Customer Rating:
I have never in my life had a tool Kreg Jig K4 Master System or equipment that I love this much. Once I removed everything from the box, did a little reading, I started using the system without any problems. I must say this was/is the greatest buy I have ever made.
|
Hand Tools and Shop Accessories 
(0 Items)
