- Overview
- More Info
- Reviews
- Videos
Enjoy the ultimate workshop companion. This advanced model of the GRR-Ripper utilizes all the same innovative features of the GR-100 but comes with two additional accessories that improve the control and expandability of the GRR-Ripper System. The Micro Jig GRR-Ripper Advanced 3D Pushblock (GR-200) is built to meet the needs of the professional woodworker or extreme hobbyist. With enhanced versatility features, the GR-200 will perform operations that were before very dicey and time-consuming with ease and speed. Whether you are making razor-thin veneer strips, building miniatures, or creating exquisite furniture you will save time, materials, and fingers with the GRR-Ripper.
|
The GR-200 includes these additional accessories:
The Adjustable Spacer - This accessory adds increased gripping surface for tackling larger stock. It also adds one inch of cutting width to the GRR-Ripper. Also, acts as a secondary balance support for small stock and straight-line ripping. Great add-on for working on the Router Table, and eliminating snipe.
The Stabilizing Plate - The Stabilizing Plate adds a new dimension of control to the GRR-Ripper. It is particularly useful when cutting small narrow pieces of stock. Perfect for trickier cuts like resawing, bevel edging, pattern routing, and much more.
The Stabilizing Plate also performs as the secondary fence that travels with the GRR-Ripper along the left side of the stock. It holds the off-cut piece in its original position through the entire cutting operation. Some users call it a ''Feather Board Plate'' without the force to pinch the stock into the saw blade.
Watch a video demo today by clicking on the ''Videos'' tab above.
What's in the Box?
- Micro Jig GRR-Ripper Advanced 3D Pushblock
- 1/4'' and 1/2'' side legs
- Adustable center leg
- Adjustable 1'' fence-side space
- Stabilizing accessory plate with balance unit
- Comprehensive Users Manual
|
| |
 |
|
Customer Reviews and Photos for:
Micro Jig GRR-Ripper® Advanced 3D Push Block System (GR-200)
|
Average Rating:
4.5
(6 customer reviews)
$79.99
Add your review...
|
|
|
1) Submitted by
Charlie H, from Valdez, AK
on 12/25/2012
Customer Rating: 
I gave this an 'Excellent' rating and haven't even used it yet. Right, NO MORE PUSH STICKS for my thin strips ever again. I work with exotic woods and have needed to glue pieces to sacrificial pieces to get as many thins as I can. This tool can do much, much more. I bought every thing to go with. This is very well made and a big, big Thank You to the developers. Real good instructions with every thing. Where has this thing been?
Everything's got Con's but there isn't many with this.
1. There's a bit of hardware involved to put it together. You'll need a Philips and a flat surface.
2. You'll end-up, possibly, with an extra plate and hardware, so, keep the instructions and have a bag for the screws and washers.
3. The 200 model comes with a CD. I ordered the CD not knowing that.
These are all small dig's compared to a product with a great amount of serious thought for us who work with small stock. Thank You again! And Thanks to Rockler to....they've always been super fast.
|
|
2) Submitted by
Gennie Gilvin, from Milledgeville, GA
on 7/29/2012
Customer Rating:
Just bought another one, pricey, but a whole lot more if you have to pay the emergency room and/or doctor. Really makes routing small profiles safer and material doesn't fall into the bit causing snipe on end of long moldings. I bought the second one because I was trying to hard to make one go all the way across on long trim.
|
|
3) Submitted by
Jim Coogan, from Monroe, WA
on 8/18/2011
Customer Rating:
After using this I will never go near a push stick again. I bought some of the other attachments for it and have been extremely pleased with both the design and my use of this tool. I will probably buy another. Buy yours today. Well worth the money and a good safety investment.
|
|
4) Submitted by
Richard Lechner, from Chatsworth, CA
on 8/5/2011
Customer Rating:
Great tool. Well designed and engineered. I feel so much safer using it. I work with a lot of small pieces and thin cuts. I use this tool on every cut. I will get another on for hand over hand feeds on longer stock. Worth every penny for great peace of mind.
|
|
5) Submitted by
Todd Brewer, from San Jose, CA
on 1/1/2013
Customer Rating: 
This thing gets great reviews all the time. I just don't get it. I bought two based on the overwhelming number of great reviews. I have used it a couple of times and set them aside. The gripper does not grip. The gripper will slide along the surface of the wood as it and the wood moves through the saw, which makes me very nervous. In fact if you look closely at some videos you will see just that. Is that safe? My grippers are brand new so no build up of dust was present on the bottom side. There is an optional little piece that connects on the back end to help push the wood through the blade. But it does not come with the gripper. Not impressed. I bought one of 27845. Haven't tried it yet but it doesn't rely on rubbery surface to "grip" the wood. It has a moveable lip at the back to help push the wood through the saw. Me thinks the emperor has no clothes.
|
|
6) Submitted by
Cindy Best, from Cleveland, NY
on 3/17/2011
Customer Rating:
Love it, Love it, Love it. No more worriies or hesitation working with thin stock. like also not using the blade guard and splitter, holds the work tight abainst the fence securely, carries both pieces past the blade/bit safely, and I still have all my fingers to paint and woodworking...my 2 passions! Used it on my joiner, table saw, and router table. This is cherry wood... did not burn or snipe at all! Truly awesome product, and Rockler delivers promptly so you can finish those projects sooner. I am ordering another one for long boards for hand over hand passes. Have told my brother and friends about the Gripper, and they are all ordering them. Strongly suggest buying 2 for boards longer than 1 foot. No more flimsy push sticks and feather boards to get in the way. Like I said LOVE it, can't wait to use it for thin inlay projects. Get one today!
|
Home  Shop Essentials Safety - Power Tool Accessories Micro Jig GRR-Ripper® Advanced 3D Push Block System (GR-200) 
|
(0 Items)
