Affordably priced and designed with maximum utility in mind, this router plate features a 1 - 1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple patterns to allow attachment to most popular routers. Six additional holes are dispersed
evenly around the center to provide an escape for routing debris. 1/4'' thick solid plastic with
6-1/2'' diameter.
Mounting hardware included.
1) Submitted by
Chip Hill, from Mill Valley, CA
on 8/19/2012
Customer Rating:
I bought this router plate to work with my Rockler Dovetail Jig. It fit my Bosch 1617EVS router with no problems and worked flawlessly with the bushing that came with the Dovetail Jig.
2) Submitted by
Don Rosendale, from Marion, IOWA
on 3/24/2011
Customer Rating:
The bushing router plate does the job, and it is the most cost-effective plate I've found. With free shipping, definitely worth the price. It fit right onto The Porter Cable router with no issues. Guide bushings fit tightly with no slop - as you would expect with a quality product. Plate is flat and catch-free.
3) Submitted by
Susan , from Spokane, WA
on 11/18/2010
Customer Rating:
Item was as described. My husband wanted it for his old Craftsman router. The mounting holes did not match up, but we drilled new holes and it works great.
4) Submitted by
Joe S., from Tiffin, OH
on 5/13/2011
Customer Rating:
Unfortunately, I had to return the item. It would not fit a Dewalt DW-610. I'm glad I didn't try to drill different holes, I may have ruined it thus making it un-returnable.
Editor's note: Please click on 'more info' tab in this offer to view list of router models this is compatible with.
5) Submitted by
Chad Riggs , from Knoxville, TN
on 2/15/2012
Customer Rating:
Its a great plate if it fits your router. The details says that it fits my Bosch router. However it does not fit the plunge base. If you have 1617EVSPK 2.25HP Router Comb Pack then this plate will fit the fixed base but does not fit the plunge base. You can try to drill the holes but as I found out its hard to make it line up. I ruined a guide bushing this way.
Editor's note: There is an additional mounting hole pattern in the plunge base that is to be used to mount this plate. It is a 3 hole pattern that is found when the sub-base is remove from the plunge base.
6) Submitted by
Brenda, from Bodega Bay, CA
on 5/24/2012
Customer Rating:
I just installed this plate on my Bosch 1617 plunge base. I put a guide bushing in the router, held the plate in place and snugged the centering cone to the bushing. I then rotated the plate until 3 holes lined up. The base holes were at the far edges of the plate holes, so to get the screws in I used a small rat tail jewelry file and elongated the hole in the plate just until the screws would go in. It then tightened down well and is perfectly centered. I used the screws provided by Bosch in my kit. Now when I want to install the guide bushing it will be centered and ready to go. I do think I am going to trim off the part of the plate that goes out past the flat side of the plunge base so it will fit back in the case.
7) Submitted by
Bryan, from Pfungstadt, GERMANY
on 11/21/2010
Customer Rating:
It looks good, it is well constructed flat and smooth, it has several holes around the outside. My router is a European off brand I bought for 20 euros the plate does not fit the router I have. I thought instead of buying a new router I would try the plate well I guess I have to bite the bullet and get a new router.
"I was given your website by a sales accocciate in a box store,while looking for a specific prouduct, He told me you were priced right and had quality products. I ordered the items I needed and am very pleased to say I agree with him." -
Ray Grismer
- 03/10/2013 See more...
Routers and Accessories 
(0 Items)
