Dust Right® Wall Mount Dust Collector

• Heavy-duty performance plus out-of-the-way convenience
• 3/4 HP, 60 Hz, 110 Volt, 12 amp motor
• Sealed bearings and shaft for quiet, durable operation
• 650 CFM suction capacity
• 30 micron dust collector bag keeps dust particles in place without sacrificing air flow
• Easily portable, just add mounting clips wherever you'll need it
• Dust collection inlet accepts a standard 4'' dust hose
• Comfort grip carrying handle allows for easy portability
• Wall mounting bracket with included hardware attaches easily to any wall
• 14'' x 14'' wall mounting plate
• Motor housing with handle extends 17''
• Hanging height with bag attached 48''
• 15 gallon bag capacity

What's in the Box?

One Dust Right® Wall Mount Dust Collector
One Z- Bracket

Best Used With:

Dust Right® Floor Sweep System (36134)
Additional Dust Collector Z Brackets for Mounting (21537)
5 Micron Replacement Collection Bag (20431)
30 Micron Replacement Collection Bag (45611)
Clear Flexible Dust Collection Hose (22791, 26660)
Dust Right® Expandable Hose (39365, 24719, 25276)
4" Keyed Bridge Hose Clamps (26177)
4" Non- Keyed Bridge Hose Clamps (31866)
4-1/2" Keyed Hose Clamps (64512)
Dust Right® 4" Swivel Fitting (21476)

Got this unit for Christmas. This is a great unit and does a good job. It's not even very noisy. I would recomend this unit to anyone with a small shop.

This is a great little dust vac! I just installed two of these into my Theatre Scene shop. In under a week of use the one for my table saw was full, the student's faces were shocked at how much dust it was pulling in. I love it because all of that dust is ending up in the bag and not in our lungs! Very good product, and I am excited to add more into the system soon.

I have a small 10'x12' shop and this unit does the job quite well. I have it hooked up to my 16" jig saw,17" grizley band saw, and my spindle sander and I have had no issues. My first day having it hooked up to my bandsaw it sucked out 6" of resaw dust from the bottom wheel cover. Needless to say I was impressed. Works for my small shop and I highly recommend it.

This is the 2nd one I have purchased. the 1st was for home and it replaced a Delta. It worked so good that I bought the 2nd for my company and it also replaced a Delta. We love the portability and ease of use.

I bought this Dust Right for my cnc Shark Pro. I think its great. It is not big and bulky. Its most definitely alot quiet than a shop vac. Remember a Rosch router, Shark moving around and a shop vac running whineing. Means your going deaf. But the Dust right has great suction. I made the mistake by leaving two 3/4 x1/1/2 sq.wood blocks on machine bed. Woof, gone, it sucked them in a blink of a eye. I also have the remotes. I will use this many years.

This is the perfect solution for those of us that do not have the budget, or space, for a multi-gate stationary system. My shop is two bays in a three car garage which previously had no dust collection so I mounted the collector on an existing support post located near the middle of the shop. That way the hose easily reaches everywhere. I had to adapt the dust outputs on a most of my five shop tools table saw, radial arm saw, chop saw, band saw, and planer to accept the Dust Right Handle. Rockler had almost all of the adapter fittings and for my table saw I was able to locate the right sized pipe at my local home center and using “Goop” I attached all of the fittings permanently. I also fabricated a wooden bend relief piece that I attached to the collector to prevent the four inch hose from collapsing at the bend where it attaches to the collector. The only downside for me is trying to avoid tripping over the four inch hose as it snakes its way around the shop floor.

Hose Bend Relief
(click to see full-size picture in new window)

I recently purchased the Dust Right System. About the same time I joined a woodworking forum. I have been asing others on the forum for feedback on the system and so far all that I have heard is that the weak point of the system is that the dust bag is not adequate for retaining the real fine dust. Apparently that is true even of the optional 5M bag. Another thing that I need to mention is that while the unit can be attached to various mounting places in a shop, it is pretty heavy and cumbersome for me at least. I had to purchase the cart with wheels on it so that the unit can be mounted on it and moved around, this ran the whole set up to $552 by the time I got it here along with all of the fittings and the optiona bag, so, it is not an inexpensive system. So far I like how it works even though I may not be retaining all of the real fine dust in the bag, and from what I understand, that is dangerious to breath so I can't give the system an excellent rating, but I will rate it as good.