Related Products
|
|
|
|
|
 |
- Overview
- More Info
- Reviews
Marking and drilling guide for Minifix fasteners.
|
An easy-to-use marking and drilling guide for fasteners. Mark location of cam holes with a center punch Includes drill guide bushing for drilling 8mm horizontal hole. Includes clamp and drill guide.
|
| |
Customer Reviews and Photos for:
Minifix JIG IT® Template
|
Average Rating:
(2.0)
(7 customer reviews)
Add your review...
|
|
|
1) Submitted by
Jim Warner, from Martinsville, IN
on 7/4/2008
Customer Rating:
This jig serves its purpose well. For the price, quality and workmanship of the handle was poor. The screw holes were undersized and torn out. I had to re-drill the holes to get the barrel to fit. The assembly instructions were poor. There was no illustration for the location and orientation of the clamp. I had to return to the website and, thankfully, found an illustration showing the clamp location and orientation.
|
|
2) Submitted by
Marvin Watson, from Port Orchard, WA
on 11/16/2007
Customer Rating: 
The Mini Jit It fixture really helped me install shelves for the bookcase I was building. The tool was easy to use and made the job much faster and a lot more accurate.
|
|
3) Submitted by
Boris Zilberman, from Clarksburg, NJ
on 12/9/2008
Customer Rating: 
For [price] I expected an actual pre-assembled jig, not bunch of parts. I also expected a better quality, with handle being made of something more durable and stable than piece of soft pine. I would expect at least HDPE block for the handle.
Because the handle is wood, the precision is lacking: the bushing in my jig didn't fit well. I was forced to hammer it in, and because wood dried out, it ended-up being skewed, so I had to remove it, fill and re-drill the hole, and then reinstall the bushing. You would be better off buying just the bushing from hardware store and get a small lexan plate at [home center] and make your own jig - you'll have same precision and pay less money. This was a big let down.
|
|
4) Submitted by
Don McKell, from Los Gatos, CA
on 1/15/2009
Customer Rating:
After assembly, my first and (so far) only attempt at using the jig to assemble a "T" junction in two pieces of 3/4 MDF resulted in the destruction of the Minifix KD barrel fitting when I attempted to turn it a full half-turn, likely due to misalignment of the large hole.
|
|
5) Submitted by
Timothy Hufft, from New Orleans, LA
on 8/29/2009
Customer Rating:
The 8mm hole with bushing is skewed off center causing a misalignment to the 15mm hole. I too made my own using just the bushing and added the capability of drilling the 15mm hole at the same time. I should have returned mine.
|
|
6) Submitted by
Ken Scott, from Charleston, SC
on 11/9/2009
Customer Rating:
Looks like a piece of plexiglass to paste to a very poorly designed piece of wood. How to attach the clamp is just 'hit or miss'.
|
|
7) Submitted by
Matthew, from Greenwood Village, CO
on 7/22/2008
Customer Rating: 
I didn't have a problem with the barrels like a previous commenter but the instructions weren't the best. It took me a few moment to figure out what they were asking for and ultimately just had to figure it out on my own. However, I would not suggest trying to make the holes for the Minifix pieces without this. It was invaluable and probably the only reason I didn't pull my hair out.
|
Home  Hand Tools and Shop Accessories Jigs, JIG IT's and T-Tracks Jigs and Rockler JIG ITs Minifix JIG IT® Template
|
|
CART
