Extra Thin Flush Mount, 1'' x 1''

An interlocking hanger bracket for hanging vanity cases, wall units, and mirrors. One piece fits into the other to form a solid streamline interlocking mount that measures 1/8" thick.

• Can be used individually for small hangings or for wide wall hangings, multiple mounts are recommended.
• Zinc plated steel.
• Mounting hardware included.
• Price per pair.

One piece fits into the other to form a solid interlocking mount that's only 1/8" thick. Zinc plated steel. Screws not included. Price per pair.

Customer Reviews and Photos for: Extra Thin Flush Mount, 1'' x 1'' Average Rating: 3.7 (22 customer reviews) $3.49 Add your review...

1) Submitted by Steve, from Council, ID on 12/9/2012 Customer Rating: Used these on one framed mirror and they worked as advertised. Just ordered an additional set for my next hanging mirror project. The set up for wall hanging went fairly quickly. Used heavy stock paper for set up on mirror and transfered the measurements to the wall.

2) Submitted by Alan, from Doral, FL on 1/19/2012 Customer Rating: This is an ingenious product that works like a charm to hang heavy objects very close to the wall. Very careful alignment is needed for two pairs or more to work properly, so take your time and mark carefully, and you will be rewarded with a sturdy hanging of great quality. I have a heavy curio cabinet hanging flawlessly for over 20 years on a wall that experiences vibration from a slamming door all the time. The best flush mounts ever!

3) Submitted by Joyce, from Houston, TX on 11/8/2010 Customer Rating: After reading viewers comments, I decided to order these mounts. Since wall studs in older construction is not reliable, I decided on mounting the brackets first on the wall. Used my four foot level to mark bracket locations as well as to level. Transfered the marks to headboard. Then I used blue tape on the wall and headboard to indicate the outside measurement of the wall mounts. Worked like a charm. Took less than a minute to line up the two brackets.

4) Submitted by Seth, from Seattle, WA on 10/29/2009 Customer Rating: I used two of these to hang a coat rack and they worked great. Finding screws wasn't difficult at all (despite other reviewer's comments). Just went down to the local hardware store and tried a few until I got just the right ones.

5) Submitted by Mike, from Atlanta, GA on 6/5/2009 Customer Rating: Good stuff. Worked will hanging a headboard.

6) Submitted by Karl, from Corpus Christi, TX on 5/16/2009 Customer Rating: Worked well hanging a headboard. A little tricky to mount. After first leveling, tracing and measuring the headboard I screwed in the bottom bracket to the wall and used double sided tape on the top bracket to attach to the headboard. Slid on easily afterwards. Use #6 tapered head screws for the larger mounts and #4 screws for the smaller flush mounts. Would have appreciated there be screws and instructions in the package.

7) Submitted by Armando Martin, from Miami Lakes, FL on 12/31/2008 Customer Rating: We used your product to hang a (very heavy) bed headboard. Two z-clips is all we used and they are holding OK. We could not use more because they have little tolerance and using 4 would have been very difficult. However, we were lucky we hung the headboard in the first try! Part of the problem was that the headboard weights 60lbs. I was impressed by Rockler, I saw the z-clip in a magazine 10 years ago and wanted to use it for this application, but I could not find it until the Internet and your website made it possible. Good job!

See all 22 reviews...