Stile and rail bits for beautifully crafted frames. Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
ROUTER BIT DIMENSIONS
Bearing 5/8'
Item No.
A
B
C
D
91969
1-3/8"
1"
1/2"
1-1/2"
Top quality bits that meet the high demands of Rockler Woodworking and Hardware. A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.
Quality performance features include:
K10 and K20 grade carbide for clean cutting action.
Final sharpening with 600 - 800 grit diamond wheels.
Precision balanced for smooth operation.
Baked-on anti-stick coating to reduce pitch and resin buildup.
Get a great deal on these superior bits!
Buy 3 or more and get 10% off, or buy 6 or more and get 15% off.
If you are not 100% satisfied with these bits, send them back for a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
1) Submitted by
William Seufert, from Snohomish, WA
on 9/14/2008
Customer Rating:
This is my second set of Rail & Stile router bits from Rockler, just a different profile. I found the bits to very accurate and tight fitting once dialed in.
2) Submitted by
Rob, from Atlanta, GA
on 7/1/2008
Customer Rating:
The fit is not dead on perfect, but it's plenty tight, just a little putty on the ends. I'm guessing the much more expensive sets give you that extra 1/128 fit.
Great set for the price. Very sharp. I've been happy with all my Rockler bits.
3) Submitted by
Burt Barnes, from Oregon Ciy , OR
on 11/4/2007
Customer Rating:
Makes Raised Panel Doors easy for novice woodworkers.
"I had great customer service when I asked for help on where the product was on the website. The reply email took me directly to the product which was perfect for what I needed.Very happy with the product " -
[Name withheld]
- 02/08/2010 See more...
CART
Bearing 5/8'
Get a great deal on these superior bits!
If you are not 100% satisfied with these bits, send them back for a refund. 
These
larger bits are designed to be used in a 
(5.0)
