Home Routers and Accessories Router Bits Straight and Rabbeting Router Bits Straight Router Bit


Straight Router Bit

Straight Router Bit

Scoll Down to Order

Average Rating: Customer Review Rating: 4.1  (11 customer reviews)




View Larger Image
Rockler Advantage



  • Overview
  • More Info
  • Reviews
Bookmark and Share  
Top quality straight router bits that meet the high standards of Rockler Woodworking and Hardware. One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal.

Bookmark and Share  
Rockler Router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts!

Top quality bits that meet the high demands of Rockler Woodworking and Hardware. A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.

Quality performance features include:

  • K10 and K20 grade carbide for clean cutting action.
  • final sharpening with 600 - 800 grit diamond wheels.
  • Precision balanced for smooth operation.

100% GuaranteeIf you are not 100% satisfied with these bits, send them back for a refund.


Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.

1) Rockler recommends using 1/2'' shank router bits whenever possible. 1/2'' shanks provide better stability with less vibration to produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations.
 
Bookmark and Share  

Customer Reviews and Photos for:
Straight Router Bit

Average Rating:
Customer Review Rating: 4.1
4.1
(11 customer reviews)

Add your review...
1) Submitted by Larry Van Dorn, from Noble, OK on 1/11/2011
Customer Rating: Customer Review Rating: 5.0
With the addition of the router featherboard kit I purchased, I was able to setup my table router to safely "plane" some 1/8" thick strips of red oak I cut using my thin rip table saw jig. The extra length the Straight Router Bit gave me was just the extra I needed. Thanks Rockler!
2) Submitted by Joel , from Charlottesville, VA on 11/14/2010
Customer Rating: Customer Review Rating: 5.0
Great product - For me the longer bit was what I needed.
3) Submitted by Jack Miller, from Savanna, IL on 10/27/2009
Customer Rating: Customer Review Rating: 4.0
The price was excellent and the bits are of high quality.
4) Submitted by Ed, from Green Valley, AZ on 9/8/2009
Customer Rating: Customer Review Rating: 5.0
Fine bit. Worked as expected. A bit long however in my PC 690 router. With the standard PC base, I barely had enough router motor housing inside the base to hold it steady.
5) Submitted by Frank Larson, from Medford, WI on 7/2/2009
Customer Rating: Customer Review Rating: 4.0
Nice clean dadoes in hardwood. The bit could be longer. I'm using it in a Dewalt plunge router mounted in a table. Not much of the shank is inside the collet to get the depth of cut I need.
6) Submitted by Jake Neuffer, from New Harmony, IN on 12/29/2008
Customer Rating: Customer Review Rating: 5.0
As usual only the best quality products that I have found. Repeat customer and will be as long as I dabble in woodworking.

A graduation gift for a friend.
(click to see full-size picture in new window)
Product Review for Straight Router Bit - Rated 5 Stars
7) Submitted by J, from Cooley, WA on 6/16/2008
Customer Rating: Customer Review Rating: 5.0
Purchased the 5/8" bit for a specialty inlay flooring job. Outperformed 2 other previosuly used bits by a long shot. Best quality bit I have used in 15 years. I will never go back to another- cut my use time in half.
8) Submitted by Phil Dier, from Nashville, TN on 1/29/2008
Customer Rating: Customer Review Rating: 5.0
I'm building a router table and this bit was just the thing to tear through my Formica and plywood tabletop.
9) Submitted by Dale Grabowski, from Double Oak, TX on 11/1/2010
Customer Rating: Customer Review Rating: 1.0
Didn't work well at all. The broke at the collet/shank junction in a CNC operation. broke at less than 4 linear feet at a slow feedspeed. well under the chip calculator ranges. Returned the broken ones for credit and the new unused ones.
10) Submitted by Rocky Williams, from Longview, WA on 2/28/2011
Customer Rating: Customer Review Rating: 1.0
I have purchased two of the 1/4" straight bits with the 1/2" shaft. The first one broke. I thought it was operator error as I was new to router work. I assumed that I had fed the work bit mounted to router on a router table too fast or took too deep of a cut. The second bit has been "babied". It also broke. I cannot recommend this bit.
11) Submitted by Jim K, from Whitman, MA on 10/29/2007
Customer Rating: Customer Review Rating: 5.0
I'll be the first to admit I have to work on my routering skills. This bit was very solid for me and made easy work of a daunting project. This bit made me look good.
 
Order this Item
1/4 Inch Shank 2 Fluted:
Quantity Item Number Item Stock Status Price
36348 Straight Router Bit 1/16" Diameter x 1/4" Cutter Length (1/4" Shank)
In
Stock 		$19.99 Each
90000 Straight Router Bit 3/16" Diameter x 1/2" Cutter Length (1/4" Shank)
In
Stock 		$13.99 Each
81407 Straight Router Bit 1/4" Diameter x 3/4" Cutter Length (1/4" Shank)
In
Stock 		$14.49 Each
90022 Straight Router Bit 1/4" Diameter x 1" Cutter Length (1/4" Shank)
In
Stock 		$14.49 Each
90033 Straight Router Bit 5/16" Diameter x 1" Cutter Length (1/4" Shank)
In
Stock 		$14.99 Each
90088 Straight Router Bit 3/8" Diameter x 1" Cutter Length (1/4" Shank)
In
Stock 		$14.99 Each
90099 Straight Router Bit 7/16" Diameter x 1" Cutter Length (1/4" Shank)
In
Stock 		$15.49 Each
90154 Straight Router Bit 1/2" Diameter x 3/4" Cutter Length (1/4" Shank)
Oversold
until Jun 20, 2013
Reserve
Yours Today 		$15.99 Each
90165 Straight Router Bit 1/2" Diameter x 1-1/4" Cutter Length (1/4" Shank)
In
Stock 		$17.49 Each
90253 Straight Router Bit 5/8" Diameter x 1" Cutter Length (1/4" Shank)
In
Stock 		$17.99 Each
90297 Straight Router Bit 3/4" Diameter x 1" Cutter Length (1/4" Shank)
In
Stock 		$19.99 Each
1/2 Inch Shank 2 Fluted:
Quantity Item Number Item Stock Status Price
90352 Straight Router Bit 1/4" Diameter x 3/4" Cutter Length (1/2" Shank)
In
Stock 		$13.49 Each
90385 Straight Router Bit 1/4" Diameter x 1" Cutter Length (1/2" Shank)
Oversold
Reserve
Yours Today 		$13.99 Each
90440 Straight Router Bit 5/16" Diameter x 1" Cutter Length (1/2" Shank)
In
Stock 		$14.49 Each
90462 Straight Router Bit 3/8'' Diameter x 1'' Cutter Length (1/2'' Shank)
In
Stock 		$14.99 Each
90495 Straight Router Bit 7/16" Diameter x 1" Cutter Length (1/2" Shank)
In
Stock 		$15.49 Each
90550 Straight Router Bit 1/2" Diameter x 1" Cutter Length (1/2" Shank)
In
Stock 		$15.99 Each
40343 Straight Router Bit 1/2" Diameter x 1-1/2" Cutter Length (1/2" Shank)
In
Stock
Online Only 		$16.49 Each
90561 Straight Router Bit 1/2" Diameter x 1-1/2" Cutter Length (1/2" Shank)
In
Stock 		$17.49 Each
90583 Straight Router Bit 1/2" Diameter x 2" Cutter Length (1/2" Shank)
In
Stock 		$19.99 Each
34928 Straight Router Bit 1/2" Diameter x 2-1/2" Cutter Length (1/2" Shank)
In
Stock 		$25.99 Each
90616 Straight Router Bit 5/8'' Diameter x 1'' Cutter Length (1/2'' Shank)
In
Stock 		$17.99 Each
40372 Straight Router Bit 5/8" Diameter x 1-1/4" Cutter Length (1/2'' Shank)
In
Stock
Online Only 		$19.69 Each
90594 Straight Router Bit 9/16'' Diameter x 1'' Cutter Length (1/2'' Shank)
In
Stock 		$16.99 Each
90638 Straight Router Bit 3/4'' Diameter x 1'' Cutter Length (1/2'' Shank)
In
Stock 		$19.99 Each
40359 Straight Router Bit 3/4" Diameter x 1-1/4" Cutter Length (1/2" Shank)
In
Stock
Online Only 		$20.99 Each
90649 Straight Router Bit 3/4" Diameter x 1-1/2" Cutter Length (1/2'' Shank)
In
Stock 		$23.99 Each
90660 Straight Router Bit 3/4'' Diameter x 2'' Cutter Length (1/2'' Shank)
In
Stock 		$27.99 Each
90682 Straight Router Bit 7/8'' Diameter x 1'' Cutter Length (1/2'' Shank)
In
Stock 		$20.99 Each
90693 Straight Router Bit 1'' Diameter x 1'' Cutter Length (1/2'' Shank)
In
Stock 		$22.99 Each
90715 Straight Router Bit 1'' Diameter x 1-1/2'' Cutter Length (1/2'' Shank)
In
Stock 		$25.99 Each
90726 Straight Router Bit 1-1/4'' Diameter x 1-1/4'' Cutter Length (1/2" Shank)
In
Stock 		$28.99 Each
90748 Straight Router Bit 1-1/2'' Diameter x 1-1/4'' Cutter Length (1/2" Shank)
In
Stock 		$33.99 Each



Home Routers and Accessories Router Bits Straight and Rabbeting Router Bits Straight Router Bit
Locate Your Nearest Rockler Store

"I love shopping with Rockler the list of items I have purchased is many...... have yet to make it to the local store.............. when I do I will need lots of cash Thank you Rockler"
- AQC Handyman - 07/09/2012
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web1