90º red rail bracket with safety lock feature. This
is a surface mounted bed rail bracket. Screws to be used should be 32 #8 flat
head screws and 4 #10 round head screws to the length necessary for your application.
Round head screws are for locking each corner together.
90 degree Female Brackets are 5-1/4'' x 3/4'' x 1'' (marked R & L) - Male Brackets
are 1-1/2'' x 4-3/4''.
Includes two bracket sets, enough for one bed.
Screws not included.
Customer Reviews and Photos for: Surface Mounted Keyhole Bed Rail Brackets
1) Submitted by
Steve, from Memphis, TN
on 11/9/2009
Customer Rating:
Just like all those reviews before me, these brackets worked just like advertised.
2) Submitted by
Mark Mitchell, from Morrisonville, WI
on 10/1/2009
Customer Rating:
These brackets are amazingly easy to install and are completely invisible from the outside. The bed is very easy to both assemble and disassemble. I couldn't be happier with this product.
3) Submitted by
Mike Hendrix, from Canton, GA
on 9/30/2009
Customer Rating:
I built my first King size bedroom set. This bed rail bracket could not have been more perfect for the bed. The fit is perfect and they were very easy to install. If you are shopping for a set of bed rail brackets, shop no more they are great!
4) Submitted by
Dave Rydberg, from Pequot Lakes, , MN
on 9/28/2009
Customer Rating:
This is the second bed made with these brackets and they work very well. Makes a nice tight fit of bed rail to head and foot board. Will use again and they may be useful for other applications that require fast dis-assembly.
5) Submitted by
William Range, from Jackson, MI
on 8/10/2009
Customer Rating:
This is my second time using this bracket and I must say they work great. Easy installation plus they are strong. These no mortise brackets make for a quick install too!
6) Submitted by
Don Russell II, from Macedon, NY
on 11/6/2009
Customer Rating:
This product seems to do the job it was designed for very well. Nice tight fit... and they are good and strong. The one drawback I found is the range of taper in the fit. You have to be pretty careful about locating them or they will either not interlock, or drop to the bottom leaving a sloppy fit. Measure twice, mount once!
7) Submitted by
Steve Ringley, from Norman, OK
on 7/20/2009
Customer Rating:
This is my third set, one set was for twin bed, the other two for queen size, the first two sets are over 3 years old and doing great no problems.
"I have just receieved a Router Plate for my Router Table to be used w/ a Porter Cable 890 Router. Everything fit up perfectly. I would like to thank your staff for a fast responce and quality material.
" -
Don Krause
- 10/06/2008 See more...