JIG IT® Shelving Jig

Our original JIG IT® Shelving Jig is now even better!

Get perfectly, consistently spaced and centered shelf-pin holes! Economical and practical, this jig can be used on assembled or unassembled cabinetry.

Re-designed handle includes two storage compartments for self-centering bits!
Ideal for adding shelves to new or existing cabinets.
Drills holes either 1-7/16'' or 2-1/2'' from edge.
Insert shelf pin in top or bottom position to extend jig for continuous drilling.

JIG IT™ template and Rockler/Insty-Bit self-centering bits deliver perfectly spaced and centered shelf pins holes — every time.

Provides exact set back for shelf pin holes of 37mm (1-7/16'') or 64mm (2-1/2'').
Storage areas in handle holds additional drill bits.
Clear template features laser cut accuracy.
Designed for both face frame and frameless construction.
Template system designed to work with 4 bit sizes: 1/4'' and 5mm for shelf pins, 7/32'' and 9/32'' for pin sleeves.
32mm system compatible.
32mm spacing and 37mm or 64mm setback.

	Self-Centering Bit Sizes. Rockler JIG IT™ Shelf Pin Hole Drilling System

	Bit Size	Application
	1/4''	1/4'' Shelf Pin
	5mm	5mm Shelf Pin
	9/32''	1/4'' Pin Sleeve
	7/32''	5mm Pin Sleeve
	All bits fit drilling template.

• HSS Brad Point drill bit for clean cutting and long life.

•Exclusive Rockler/Insty-Bit 5mm Self-centering bit.

Self-centering bits are pre-set to bore a consistent depth for perfect fitting shlef pins and sleeves — every time. No adjustments are neccessary!

JIG IT system provides drill bit sizes for both shelf pins and shelf pin sleeves. The decorative metal shelf pin sleeves provide added strength.

Drilling Template works equally well for Face-Frame or Frameless construction — on new or existing cabinetry.

Frameless Application	Face Frame Application with Shelf Pin
Quickly and easily adjust handle to either standard drilling setback — 1-7/16'' or 2-1/2''.

1/4'' Shelf Pin Supports

Brass	Nickel	Antique brass	Black

Self Centering Shelf Bit Assembly Instructions

Customer Reviews and Photos for:
JIG IT® Shelving Jig

Average Rating:

(4.2)
(122 customer reviews)
Add your review...

1) Submitted by Doug P, from Jackson, MO on 1/29/2010

Customer Rating:

Nice product from Rockler as usual. Simple to use. I love the fact that all the accessories are stored in the jig, so I don't have to search for them. Well worth the cost.

2) Submitted by Michael Kelly, from Gypsum, CO on 12/28/2009

Customer Rating:

The shelving jig from Rockler is excellent! Simple directions. Just had to screw on the butting edge for the application needed. It allows for faced or un-faced cabinet installs. I would suggest clamping the jig in place; I noticed the bit grabs the wood and tends to move the jig down the work piece. Great product. I will be using it a lot.

3) Submitted by Bennett, from Hampstead , NC on 11/1/2009

Customer Rating:

Easy to assemble, simple design, just make sure it is clamped tight and try to minimize the play when you install the shelf pin for the "next" set of holes.

4) Submitted by Brian Singer, from Miami, FL on 10/21/2009

Customer Rating:

The Jig It is fast to setup and use and creates accurate hole patterns. I wish it had a carbide tipped bit that would stay sharp longer and reduce tearout. Also the chip clearance between the bit and guide needs some work to keep it from clogging up.

5) Submitted by Wes Garcia, from Sioux Falls, SD on 9/26/2009

Customer Rating:

Just finished using it for the first time. Made the job of drilling a number of holes for shelf pins a fast and easy job. I look forward to using the jig again on my next project - built in bookselves. It is worth every penny.

6) Submitted by Timothy Clark, from Ringwood, NJ on 9/24/2009

Customer Rating:

Fast and easy solution to drilling even rows of holes; worked perfectly. Simple to set up and use. The only problem I had was once I got started I didn't want to stop.

7) Submitted by Stuart from TN on 9/11/2009

Customer Rating:

Not a bad product. If you are drilling into plywood you will need to keep the jig tight against the wood to avoid tear out or splintering. That is not the fault of the jig however, just a characteristic of plywood.

See all 122 reviews...

Customer Reviews and Photos for:JIG IT® Shelving Jig

Customer Reviews and Photos for:
JIG IT® Shelving Jig