Get authentic, traditional English style with the strength and beauty of solid
brass in a sanded finish. This fork-style set is ideal for holding table
leaves or halves together.
Perfect for heavier table tops! This three-piece
set has a horseshoe connector and two catch units with internal steel friction
springs. Overall dimensions once mounted are 3-3/4'' Wide x 2'' D.
1) Submitted by
Mark Mueller, from Houston, TX.
on 10/10/2012
Customer Rating:
I bought 4 of these for and antique, expandable table. Very close to the original. Well made. Brass could be polished to a higher luster but unless you get under the table you'll never see them. A previous reviewer wasn't pleased because he expected too much. These are not supports. These merely hold two pieces together. In my case the table is made in two sections, each with its' own pedestal base. The forks hold the halves together. The extension fits between the halves and is also held together with these forks. Four pull outs and table pins support the extension.
2) Submitted by
Chris Kolmodin, from Mountainside, NJ
on 10/22/2010
Customer Rating:
I recently built an extension to my dining room table and installed this table keeper so that I could keep the extension tight against the table. This product was perfect for the job. It keeps the two pieces tight, is easy to use, and is nice and solid. I used two of them for my project and I'm very happy.
3) Submitted by
Lawrence, from Colyer, KY
on 12/12/2010
Customer Rating:
This product, or at least the one I received is a joke. Purchased a pair of these keepers for a 1'x 4'x 3/4" leaf extension. After installing the pair, the leaf droops down about an inch instead of being level with the table. The problem appears to be too much slop between the flat pins and their holders. Hard to believe someone would put a product like this on the market.
Hardware 
(0 Items)
