1/2'' Power Twist Plus Link V-Belt

• 1/2'' wide.
• Replaces the standard 1/2'' V-belt on most machines
• Can be adjusted by removing links
• Made of interlocking segments of polyurethane elastomer and multiple plies of polyester fabric
• High-performance V-belt reduces vibration
• Sold by the foot.

What's in the Box?

One Foot of Power Twist Plus V-Link Belt, 1/2'' wide

I read many of the previous comments that indicated an improvement in operation of table saws as well as a reduction in vibration. Some even talked of the "standing nickel" test. I was skeptical but thought I would give it a try. My Craftsman contractor's saw is in a somewhat heated garage{e.g. above freezing but usually colder that one would want to work}. Subsequently the saw started hard and had very noticeable vibration. Then I installed the twist belt. An immediate improvement was obvious. The saw started easily and there was no noticeable vibration. In fact the nickel stood- even from the cold start. Can't help but believe this will result in better cuts and making life easier for me and the saw.

I purchased this belt for my Grizzly table saw because I have had a vibration in it since I got it 10 years ago. I even looked into new pulleys but decided to go this route first. WOW is all I can say. As soon as I started up the saw I could hear and feel the difference. Seems like it starts smoother with less stress on the motor and yes, no vibration at all. I went right back and ordered one for my jointer and drill press. I would recommend this belt to any and all my fellow woodworkers. Thanks to the folks at Rockler!