Top quality router bits designed for hinge mortising. Choose 1/2 or 3/4'' diameters for 1/4 or 1/2'' shanks. Each bit is 3/4'' in height.
ROUTER BIT DIMENSIONS
Item No.
A
B
C
D
1/4" SHANKS
90759
1/2
3/4
1/4
1-1/4
90781
3/4
3/4
1/4
1-1/4
1/2" SHANKS
90792
1/2
3/4
1/2
1-1/2
90814
3/4
3/4
1/2
1-1/2
Choose 1/2 or 3/4'' diameters for 1/4 or 1/2'' shanks. Each bit is 3/4'' in height.
A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.
Quality performance features include:
K10 and K20 grade carbide for clean cutting action.
Final sharpening with 600 - 800 grit diamond wheels.
Precision balanced for smooth operation.
Baked-on anti-stick coating to reduce pitch and resin buildup.
If you are not 100% satisfied with these bits, send them back for a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
There are no customer reviews or photos for this product yet.
If you have used this product,
please click here
and tell us about it.
If you've used this product in a project,
we'd love to see a photo of your finished project.
You can post that here as well.
"I've been looking for a cloth 2-way tape that i can use to hold down nameplates to be engraved! Your product was just what i was looking for :) Your customer service answered my questions professionally and i received my order in a few days! I am very pleased & will do more business in the future :)" -
LIOY SIGNS, INC.
- 10/26/2009 See more...
CART
If you are not 100% satisfied with these bits, send them back for a refund. 
These
larger bits are designed to be used in a 
