Related Products
|
- Overview
- More Info
- Reviews
It beads, coves, planes, trims end grain and much more!
|
Taming the skew is perhaps the most common of problems encountered
by the woodturner. The digs-ins which ensue from incorrect presentation
cause many turners to avoid using the skew chisels and consequently reduce
their skills and limit their opportunities of turning between centres.
The new Spindlemaster does away with this problem. Its design is flat
on one surface, and the oval on the other making dig-ins a thing of the
past. It is easy to use for even the least experienced turner. In addition
to doing the regular planning job of the skew chisel, the Spindlemaster
will also cut both beads and coves with the greatest ease. The Spindlemaster
gives a fine finish every time. That is a particular advantage when working
on soft woods like pine which normally leave a very coarse finish.
Micro Spindlemaster - Since it's introduction, the Spindlemaster
has become the favorite tool of many turners. That is not surprising when
you consider it's advantages - it has no corners to dig in, it planes,
beads, coves and trims end grain, and it's polished bevel gives a superb
finish from the tool especially on softer woods. Now this micro version
has been introduced with all the same advantages. That makes it ideal
for those specializing in miniature work, bobbin makers and pen turners.
 The
Spindlemaster is ideal for small projects like boxes and rattles, and
works just as effectively on large pieces like bedposts and staircase
spindles. If you have reservations about using a skew chisel, the Spindlemaster
is the answer.
| Size |
Part
Number |
Overall
Length |
Handle
Length |
| 1/2"
- 13mm |
24048 |
6-1/4" |
10" |
| 3/4"
- 19mm |
24058 |
16-1/4" |
10" |
| 1"
- 25mm |
24066 |
18-1/4" |
12" |
| Micro
Spindlemaster |
27702 |
10" |
6-1/4" |
|
| |
Customer Reviews and Photos for:
Robert Sorby Spindlemaster
|
Average Rating:
(4.8)
(10 customer reviews)
Add your review...
|
|
|
1) Submitted by
James, from Chitko, WI
on 9/8/2009
Customer Rating:
Super easy to use on the small stuff. Works very well right out of the box.
|
|
2) Submitted by
Greg Mead, from Gainesville, FL
on 7/20/2009
Customer Rating:
Oh, I like this tool. For those of us who are skew-challenged, this works very well. It IS possible to have a catch with this tool (which may say more about me than the tool...) but much less frequently, and it does produce a nice finish.
For me, I can use the skew pretty well from right to left (I'm right-handed) but often catch from left to right. Now I just switch to the Spindlemaster when going to the right. It also tends to make coves easily and with a nice finish, in either direction, and can even be used as a finish scraper for those coves.
The tool came nicely sharpened. My only concern is that eventually (probably not for a LONG time), sharpening by honing the flat side will reduce the thickness of the tool.
|
|
3) Submitted by
Dick, from Sequim, WA
on 4/2/2009
Customer Rating:
I purchased this for turning pens and bottle stoppers after getting frustrated with my skew. I love it and wish I had purchased one sooner.
|
|
4) Submitted by
Randy Kimery, from Columbus, INDIANA
on 3/1/2009
Customer Rating:
Absolutely the greatest tool for making pens.
|
|
5) Submitted by
Bob Molloy, from Delran, NJ
on 12/8/2008
Customer Rating:
As a new turner with and older Delta lathe, this tool takes the worry out of using a skew. The Spindlemaster is up to the high quality expected of Sorby.
|
|
6) Submitted by
L Pace, from Menifee, CA
on 9/28/2008
Customer Rating:
What a great tool..I am a beginner with a new Jet lathe and of course had to buy all the tools. I purchased this as a suggestion from a book on begining turning. WOW....Its the best tool of all that I use. It holds it's sharpness, does smooth cuts, and to me it does everything and does it great. Buy it.
|
|
7) Submitted by
Don McAfee, from Huber Heights, OH
on 10/16/2009
Customer Rating: 
The tool is probably great, I have no doubt, but I like my skew better for working on pens right now. Maybe I just need to learn how to use it. I'm sorry I can't give it a big heads-up.
|
See all
10 reviews...
|
Home  Hand Tools and Shop Accessories Turning Tools and Accessories Turning Hand Tools Robert Sorby Spindlemaster
|
|
CART
