Titebond HiPurformer Polyurethane Hot Melt Adhesive

Titebond HiPurformer Hot Melt Kit includes gun assembly, carrying case, and 3 Titebond cartridges. Sets faster and works better than traditional hot melt adhesives! The Titebond glue sticks are tailored to your application for best results; WW = Wood to Wood, MP = Multi Purpose - Designed to bond most common materials (i.e. Melamine, Ceramics, metal, marble, etc.). You can also purchase the HiPurformer Glue Gun and adhesives separately below.

The HiPURformer Advanced Bonding System offers three adhesives, all of which are waterproof, provide strong, permanent bonds and reduce the need for clamping or bracing. For many applications, the system can eliminate the use of nails or staples, reducing time and money in filling, sanding and staining repair marks. These Adhesives have a 5-minute set time for assembly work. Features: Includes 3 Titebond cartridges (WW30, WW60, and MP75) Cordless Applicator Durable Trigger components for refined adhesive control Heating Cylinder houses cartridges for extended use Waterproof Storage case Dripless tip for clean precise use Lightweight ergonomic design with soft grip handle, reduces user fatigue Mechanical feed insures continuous glue stream Resists Temperatures From -20 Degrees F To +275 Degrees F Best Used With: Titebond WW30 Polyurethane Hot Melt Adhesive Titebond WW60 Polyurethane Hot Melt Adhesive Titebond MP75 Polyurethane Hot Melt Adhesive Titebond MP300 Polyurethane Hot Melt Adhesive

HiPurformer Kit Datasheet MSDS: Titebond MP300 MSDS: Titebond MP75 MSDS: Titebond WW30 MSDS: Titebond WW60 Titebond MP300 Datasheet Titebond MP75 Datasheet Titebond WW30 Datasheet Titebond WW60 Datasheet

Customer Reviews and Photos for: Titebond HiPurformer Polyurethane Hot Melt Adhesive Average Rating: 4.5 (12 customer reviews) $157.49 Add your review...

1) Submitted by Chris Hackett, from Greenwich, CT on 8/10/2009 Customer Rating: I purchased this to attached toe strips to a staircase I restored (in leu of using finishing nails). I wanted a way to attached to toe strips that was faster and easier than nails or screws. Also, I wanted to finish (shellac and varnish) the toe strips before installation and didn't want to have to fill nail holes with putty and then try to match the finish over the putty. The HiPurfomer worked exceptionally well for this application. I used the adhesive that sets in 75 seconds (one of three included in the kit), which gave me enough open time to get the glue onto the toe strips yet set fast enough that I only had to hold the strips in place for 30 seconds or so.

2) Submitted by Vic Stock, from Chattanooga, TN on 6/23/2009 Customer Rating: This product is superior. I have a method of teasing the glue cartridge with a small drill when it gets a little picky, but once it is flowing smoothly it will remain that way to the end. This gluing system and the MP75 adhesive have literaly saved my company. The glue is the most expensive component in our product, but it makes our product far superior to what it was in the early days. eleven inch tribute plaque - baltic birch with acrylic spacers (click to see full-size picture in new window)

3) Submitted by Laura H, from Ft. Worth, TX on 3/6/2009 Customer Rating: I have gone through many glue guns in 20 years, and this one is the best! I am using it for crafts (all kinds of different mediums, using MP75 glue) and this gun has yet to let me down. The glue (tube) is expensive but it saves me so much time that it is worth it to me. Read all the instructions and follow them carefully! If you are ready to get serious about glue guns and quit wasting your time with cheap ones from big box stores, give this glue gun a chance. I think you will be very pleased.

4) Submitted by Jeff, from Middlefield, OH on 2/27/2009 Customer Rating: Works good!

5) Submitted by Greg, from Media, PA on 2/14/2009 Customer Rating: Excellent product for quick bond applications, with excellent joint strength. However, you must make sure the surfaces being bonded are not cold to begin with, as this will significantly reduce the assembly time, perhaps to the point where it cures to fast to allow a bond. Shelf life once open is not great, so try to line up all your projects for it ahead of time. At [price] per tube, it is significantly more expensive than regular wood glue.

6) Submitted by Mike Wolter, from Hinckley, MN on 12/29/2008 Customer Rating: I love my high quality glue gun. I have been looking for a glue gun of this type for quite some time. My wife bought it for me for Christmas, and I love it. Thanks Rockler for making such a superior product.

7) Submitted by Jeff, from Stafford, VA on 2/21/2009 Customer Rating: I've used or owned most every kind of glue and fastener system that’s out there. I don't see how in the world this thing is getting these 5 star ratings. The glues are not as strong as advertised and half of the glue cartridges I purchased were already half way cured even though the expiration date was months away. Because of this, I say its way over priced and I’m sending mine back. If the glue was stronger and did not have a problem with shelf life, I would keep it and say it’s worth its weight in gold. But it’s not. I’m sticking (no pun intended) with polyvinyl acetate, polyurethane and epoxy.

See all 12 reviews...