1/2''drill chuck for lathe and two choices of morse tapers.
|
Use this drill chuck and either the #1 Morse taper or #2 Morse taper listed to assemble as shown. Key is supplied with chuck. Both #20777 and either #20785 or #20793 need to be ordered to complete assembly as shown. This assembly is used on a lathe to hold a mandrel for turning wood pens and pencils.
|
| |
Customer Reviews and Photos for:
Lathe Chuck and Tapers
|
Average Rating:
4.7
(9 customer reviews)
Add your review...
|
|
|
1) Submitted by
Ernie Trotter, from Smithton, IL
on 2/4/2013
Customer Rating: 
Great drill chuck, well priced, works as advertised. The tab at the end of the taper is a hold-out from a metal lathe. The tab is aligned vertically when inserted into the tailstock, it locks into a slot in the tailstock which helps it grip better.
|
|
2) Submitted by
Mark Fuller, from Poway, CA
on 10/27/2010
Customer Rating:
I bought the Chuck with a #2 Taper for my Craftsman Mini lathe. Right out of the box I was impressed with the fit and finish. It is working nicely and seems very durable. I question the tab at the end of the taper, I have to remember to extend the Tail Stock a little before installing the chuck but that's not a big deal. Very nice product, highly recommended.
|
|
3) Submitted by
Jeppetto, from Anacortes, WA
on 1/16/2009
Customer Rating: 
I have a Jet mid sized lathe. Since I am new to turning and what works with what I bought the #2 taper with the chuck. It is the correct size and both work well with my lathe. The taper is a bit longer then the ones I have been using, though, so when I put it in the tailstock I need to extend it out a bit for the taper to seat in all the way. Other then that they both work great and I am very happy.
|
|
4) Submitted by
Michael J. Godwin, from Gautier, MS
on 12/22/2008
Customer Rating:
The Taper and Chuck are "all in one", but actually are sold separately. Not a big problem though. The quality of the products is great and they do work really well.
|
|
5) Submitted by
Danny Steggall, from Solon, IA
on 6/28/2008
Customer Rating:
This drill chuck works great in my wood lathe both in the headstock for arbors and in the tailstock for drilling. I purchased a #1 Morse taper with it and they fit together perfect.
|
|
6) Submitted by
Barrett Robinson, from Olathe, KS
on 1/14/2008
Customer Rating:
This a great quality part, highly recommended!
|
|
7) Submitted by
Brianne Corbett, from Buffalo, NY
on 1/10/2010
Customer Rating:
This is a good solid drill chuck. It holds well and is well aligned. I do have a gripe with the pictured #2 taper. The tab at the end does not fit into either the headstock or the tailstock of my Delta 46-460. So I ground it off. Then it works fine. I don't really see the purpose of it. The chuck is keyed and should require no assistance other than the key to open. The taper is popped out by a ram so what exactly is that tab for I don't know. Grinding it off was annoying and time consuming. So I knocked down the rating 1 point.
|
See all
9 reviews...
|
Power Tools and Shop Accessories 
(0 Items)
