Customer Reviews and Photos for:
Desk Top Fasteners
|
Average Rating:
4.1
(30 customer reviews)
$5.49
Add your review...
|
|
|
1) Submitted by
Alan Struss, from Rensselaer, NY
on 8/5/2011
Customer Rating:
Used these fasteners before! work well. Easy to use, saves time compared to other types of table fasteners! purchased extras so that I have them on hand.
|
|
2) Submitted by
Calhoun Benton, from Johnsonville, SC
on 2/25/2011
Customer Rating:
I've been using these table top fasteners for my projects built for my kids. They work well and don't take up much space for the support the give.
|
|
3) Submitted by
Ron Bakke, from Crooked River Ranch, OR
on 11/29/2010
Customer Rating: 
I've used these fasteners to hold down counter and table tops and they work great. I decided to use the fastener to hold up a quilt rack on the wall and they work great because of the weight of quilt and solid oak rack.
|
|
4) Submitted by
Kent Merrill, from Jonesborough, TN
on 8/13/2010
Customer Rating:
I usually use wood buttons as fasteners on all the pieces I design. Unfortunately I did not take into account the kickers for the top row of drawers. They encroached on the space I needed for the wood buttons. I had a bag of stamped desk top fasteners that I bought several years ago. It turned out they were all rusty. These solid steel fasteners are far superior to your competitor's product.
Coleman's Apothecary Cabinet
|
|
5) Submitted by
Paul, from Chouinard, TX
on 7/24/2010
Customer Rating:
I needed the fasteners fast and Rockler delivered. Good product and great service. Thank you.
|
|
6) Submitted by
Kenny, from Swartz Creek, MI
on 3/24/2010
Customer Rating:
Super easy to install. Allows for wood movement. Highly recommended.
|
|
7) Submitted by
Nick Green, from Minneapolis, MN
on 6/5/2013
Customer Rating: 
These new fasteners are a piece of junk. The #6 screws go right through them.
|
|
8) Submitted by
David, from Cranberry Twp, PA
on 11/6/2012
Customer Rating:
This new style is junk the screws pull through and the look cheap. The old punched steel was a quality product. Any review older than 2012 was for the old style.
|
|
9) Submitted by
Scott Davis, from Elkhorn, NE
on 7/28/2009
Customer Rating:
I used them to hold upholstered inserts for cabinet doors. Worked like a million bucks or a billion in today's economy.
|
|
10) Submitted by
Mike Warner, from Terre Haute, IN
on 3/30/2009
Customer Rating:
I used them to attatch the top on a round coffee table. They worked great. I will have them in stock for the next project I might need them for.
|
|
11) Submitted by
Kevin, from Morehead, KY
on 10/13/2012
Customer Rating:
These are not the high quality fasteners, they are cheap stamped steel, If you tighten them just a little to much the screw will pull right thru the fastener. I was very disappointed to receive these instead of what I was used to. Most of the five star reviews here are for the old fasteners.
|
|
12) Submitted by
Rick Garrett, from LANSING, MI
on 3/6/2009
Customer Rating:
I love these things. They work just as advertized. Always keep a few packs in stock.!!
|
|
13) Submitted by
Bob Leavitt, from Hollywood, MD
on 2/23/2009
Customer Rating:
I have used this product on a number of projects, the most recent is the attachment of the top to an entertainment center for a flat screen TV. Works good, lasts a long time.
|
|
14) Submitted by
Patrick Lamie, from Abilene, TX
on 2/15/2009
Customer Rating:
Product is sturdy and worked exactly as advertised.
|
|
15) Submitted by
Jerry, from Akron, OHIO
on 2/13/2009
Customer Rating:
Good for attaching a table top to a table
I am making a table for your dog
It is a table you can use and keep your dog in at the same time
A dog in his cage and a table for you.
|
|
16) Submitted by
John H. Mead, from Monroe, NH
on 2/7/2009
Customer Rating:
Perfect for attaching the top to the bedside nightstand I just completed. If only I could remember to attach them pointing towards the length of the top rather than the width!
|
|
17) Submitted by
David M, from Broomfield, CO
on 1/23/2009
Customer Rating:
These are a great product. I was working on a project where I had to construct the frame cross members inside the brickwork because the side members were taller than the opening, so I couldn't use dowels, biscuits or screw it in from behind. Toe nailing was too "clunky" and wouldn't provide the srtuctural integrity I needed so I turned to the desktop/"apron" fasteners. (See pictures attached)
|
|
18) Submitted by
J. Y. Albert, from Bartlesville, OK
on 10/18/2008
Customer Rating:
These are heavy duty; almost 1/8" thick and will not bend when you join tops to aprons. Just be sure to make Forstner bit hole same depth as desktop fastener and let bit hang over apron some. Basically a good value and does the job well.
|
|
19) Submitted by
Glenn Deuchler, from Westminster, MD
on 7/3/2008
Customer Rating:
I have used these for several table tops. They function as advertised; I have never had an instance where they failed to secure the top. For the money, it is a good value.
|
|
20) Submitted by
Lee Daby, from Madison Lake, MN
on 3/30/2008
Customer Rating:
I used the desk top fasteners to attach the table top to the leg assembly on a cherry coffee table that I made this winter. The project turned out great.
|
|
21) Submitted by
Len Sadauskas
on 2/28/2008
Customer Rating:
To maximize the holding power I wanted full contact between the fastener and the table top. However, you don't provide the thickness dimension of the fastener that will define the depth of the recess on the table frame. Also, because the fastener is slightly cupped, I ended up having to fit each to its frame recess hole.
|
|
22) Submitted by
Tony DeVito, from Stow, MA
on 1/23/2008
Customer Rating:
Product works great very simple to install a novice can do it.
|
|
23) Submitted by
John Knobbe, from Winthrop Harbor, IL
on 1/10/2008
Customer Rating:
A quality piece of hardware. A must for all woodworkers making table and desk tops.
|
|
24) Submitted by
Vincent Jesuele, from West Long Branch, NJ
on 2/25/2008
Customer Rating:
Zero holding power. Not worth even the modest price.
|
|
25) Submitted by
Donald Rolfe, from Rising Sun, MD
on 12/1/2007
Customer Rating:
These fasteners are super hard and just what I needed. They worked just perfect.
|
|
26) Submitted by
Jerry Thompson, from Akron, OH
on 10/25/2007
Customer Rating:
Very fast shipping for this item. The item is just what I ordered. I just can't believe the fast shipping every time I order something from Rockler the order comes so fast. It Is so GREAT. I wish I could get everything this fast. The fast shipping is, as you can tell a big deal to me.
|
|
27) Submitted by
Glen, from Pierre, SD
on 12/13/2007
Customer Rating:
Shipped quickly and worked great!
|
|
28) Submitted by
Brandon, from Baden, PA
on 10/3/2012
Customer Rating:
I use these all the time and loved them {yes loved them}. I just bought some in the spring for a coffee table. I finished a matching end table and went back to get more. They used to be a piece of punched steel about an 1/8in thick and were good quality. They are now a thin piece of rolled steel, price is the same and the quality dropped along with the appeal for me, they just look cheap.
|
|
29) Submitted by
Michael J Evanich, from Springfield, IL
on 12/2/2011
Customer Rating:
These are great little fasteners, had to have them to finish out my china cabinet that I'm making and they worked great for the top on the base unit . Very hard steel and SS screws . Worth the investment.
|
|
30) Submitted by
David Trelford, from Scottsdale, AZ
on 5/16/2008
Customer Rating: 
The product probably works for light to medium jobs (read... night stands and such).
|
Hardware 
(0 Items)
