Dowel Pro Jig

Delivers the precision demanded by professional woodworkers. Precisely aligned guides for 1/4'' , 5/16'' and 3/8'' holes. Handles stock ranging from 1/2'' to 1-1/4'' , includes precise depth stops for 1/4'' , 5/16'' and 3/8'' drill bits. An assortment of dowel pins is included with the jig. Aluminum.

Customer Reviews and Photos for: Dowel Pro Jig Average Rating: (3.8) (12 customer reviews) Add your review...

1) Submitted by Jim Noeth, from Granite City, IL on 10/23/2009 Customer Rating: It worked very well for me, I've used it to do both edge to edge joints and right angle joints. The only 'not so good' are the stop collars, I replaced the slotted set screws with hex (allen) drive screws, and they work much better. Seems like it wouldn't cost much more to use those type of screws rather than slotted screws, which because of their small size, you can't tighten very tight. I would definitely recommend this product

2) Submitted by J B, from Vicksburg, MS on 5/23/2009 Customer Rating: Did what we wanted but still was not as tight as we expected Recuired a little nore training to take the slope out of the joints

3) Submitted by Laurel Sharmer, from Potsdam, NY on 9/9/2008 Customer Rating: For hobbyists who don't want to invest in a biscuit cutter, this jig is a great alternative - and less expensive. The directions are clear and easy to understand. The jig can be used almost effortlessly - even for mitered edges. The photo shows my first project using the jig: 1 x 8s joined on edge and mitered edge banding - all joined with the jig and dowels. I did use a good quality up-cutting drill bit intended for doweling, but the depth collars included in the kit would not work with this bit. A little bit of tape on the bit solved the problem, though. Edge Joining (click to see full-size picture in new window)

4) Submitted by Dan, from Park City, UT on 4/10/2008 Customer Rating: For the lame woodworker (like me) who wants a plain and simple doweling solution, this product would be hard to beat. The directions are clear and the result is what one would expect. What more could you ask for?

5) Submitted by Mark, from Elko, NV on 1/4/2008 Customer Rating: Purchased the Dowel Pro Jig to repair and construct some cutting boards (edge to edge joints). The setup was easy. The key is the second clamp which secures the pieces while the dowel guide is in use and being moved. the dowel guide is then left in place to move the second clamp as needed. The alignment results were very good. After all joints glued, a run through the planer finishes the product. I am very pleased with this unique Jig. The price was reasonable and it was promptly shipped.

6) Submitted by Mike LaFrenier, from Bigfork, MN on 9/21/2007 Customer Rating: I set it up for the first time last night and it went very good. I joined two boards edge to edge and got a very nice joint. I do a lot of laminating to make panels for cabinets and this should make life a little easier, less planing and sanding. For the price, it is an exceptional deal and the quality seems to be quite good. It clamps the boards firmly in place and holds them there, unlike some other products I have used. I am very pleased with ordering from you. I usually get the confirmation email that the product has been sent the same day I receive it. Keep up the good work.

7) Submitted by Gary Olszewski, from Henderson, NV on 9/15/2007 Customer Rating: The Dowel-Pro jig is the easiest to use of many I've tried, sets up in minutes, perfect alignment! A great product, terrific price. The Best! The Dowel-Pro jig Is beautiful! Makes the work a "piece of cake"! I looked at several others, more expensive, and mostly hold only one piece at a time, making alignment difficult at best. But the Dowel-Pro is a double, to align both pieces together in an instant! The perfect tool at the perfect price! Thank You for great service and great products!

See all 12 reviews...