Provincial Edge Bit

Rockler: Provincial Edge Bit Speciality molding bit for decorative edges. Two flute, 5/8" ball bearing guide.

 
Item No. A B C
64033 1-1/8" 1" 1/2"
A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.

Quality performance features include:

  • K10 and K20 grade carbide for clean cutting action.
  • Final sharpening with 600 - 800 grit diamond wheels.
  • Precision balanced for smooth operation.
  • Baked-on anti-stick coating to reduce pitch and resin buildup.

100% GuaranteeIf you are not 100% satisfied with these bits, send them back for a refund.
Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.

1) Rockler recommends using 1/2'' shank router bits whenever possible. 1/2'' shanks provide better stability with less vibration to produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations.

Quantity Item Number Item Stock Status Price
64033 Provincial Edge Bit
In
Stock 		$54.99 Each