Jet® Floor Model Oscillating Spindle Sander
The JET JOVS-10 Oscillating Spindle Sander is loaded with the features that make it an ideal finishing machine for your shop. A sturdy one-piece steel stand houses the powerful 1HP motor that drives the 1-1/2" oscillating drum at a consistent 1725 RPM. Need to get right to work? This sander comes standard with a complete set of 10 spindles and abrasive sleeves from 1/4" to 4" so you can jump right in to that project. All in all, this is one tough machine with the capacity, power and quality you expect from JET.
- 1-1/2" oscillating action reduces friction heat to protect wood and prolong sleeve life
- Main spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performance
- Worm and gear mechanism runs in an oil bath to prolong its life and durability
- Table tilts to 45° to accommodate bevel sanding projects
- Industrial push-button switch is conveniently located for finger-tip control
- Powerful 1HP motor is independently mounted inside the base for easy access and service
- 4" dust port connects to your dust collection system to keep your work area clean
- Spindles have threaded ends for quick, easy changes
- Table inserts help prevent the dust and debris from falling into the motor; help protect operator
- Built-in storage racks keep spindles and table inserts handy
- Sturdy one-piece steel stand provides support and stability
Untitled Document
| Product Specifications |
| Model Number |
JOVS-10 |
| Brand |
Jet |
| Height |
42" |
| Width |
26" |
| Length |
26" |
| Net Weight |
307 lbs. |
| Table Size (L x W) |
24" x 24" |
| Table Tilt |
0-45 degrees down |
| Spindle Speed |
1725 RPM |
| Oscillations Per Minute |
75 |
| Length of Oscillations |
1-1/2" |
| Motor Power |
1 HP |
| Motor Voltage |
115 V |
| Prewired Voltage |
115 V |
| Motor Current |
9 A |
| Motor Phase |
1 Ph |
Standard Equipment
- Complete set of 10 removable spindles 1/4" to 4" diameter
- 1/4" diameter x 5" long steel
- 3/8" diameter x 6" long steel
- 1/2" diameter x 6" long steel
- 5/8" diameter x 6" long steel
- 3/4" diameter x 9" long steel
- 1" diameter x 9" long rubber
- 1-1/2" diameter x 9" long rubber
- 2" diameter x 9" long rubber
- 3" diameter x 9" long rubber
- 4" diameter x 9" long rubber
- Three table insert rings
- Two spindle wrenches
- 4" dust chute
Optional Accessories
