Bearing guide is located on the shank side of the blade, and has the same
diameter as the blade, making this the perfect choice for template work when
the template is above the worked material (if using a hand-held router in the
conventional way). Available in three sizes. Click "More Info" Tab for specific dimensions.
 |
|
A
fantastic value on high quality router bits. These bits are
competitively priced while offering high performance and long
life.
 If
you are not 100% satisfied with these bits, send them back for
a refund. |
| These larger bits are designed to be used in a router table. |
| Router
Safety Tips: It's easy to prevent mishaps if you take a few simple precautions. 1) Rockler recommends using 1/2'' shank router bits whenever possible. 1/2'' shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations. |
| Quantity | Item Number | Item | Stock Status | Price |
| 33136 |
Pattern Flush Trim Bit 1/2'' Dia. x 1'' Cutter x 1/4'' Shank
|
In Stock |
$17.99 Each | |
| 35612 |
Pattern Flush Trim Bit 3/4'' Dia. x 1'' Cutter x 1/2'' Shank
|
In Stock |
$27.99 Each | |
| 35244 |
Pattern Flush Trim Bit 3/4'' Dia. x 1-1/4'' Cutter x 1/2'' Shank
|
In Stock |
$29.69 Each | |
| 33466 |
Pattern Flush Trim Bit 3/4" Dia. x 1-3/4" Cutter x 1/2" Shank
|
In Stock |
$27.59 Each | |
| 37348 |
Pattern Flush Trim Bit 1" Dia. x 1-3/4" Cutter x 1/2" Shank
|
In Stock |
$31.99 Each |