Our clean and simple "peel-and-stick" veneers are now available in convenient 24" x 32" sheets with a thickness of 1/64''. The 32" lengths are great for doors, face frames and end panels on vanities as well as on standard base cabinets with a toe space. No messy contact cement need apply-simply cut the veneer to size with a scissors, peel off the backing and use a veneer smoothing blade (Rockler #24927, sold separately) for the smoothest application possible.
This premium grade 1/64" thick flexible veneer comes with a 10 mil thick paper forstability and a pressure sensitive adhesive applied to its backside. These veneers permanently bonds to wood, glass, plastic and metal. They come in: Red Oak, White Oak, Sawn White Oak, White Birch, Cherry, Hickory,White Matte Laminate, Ash, Maple, Mahogany and Walnut.
Not recommended for use on fir plywood
Refacing tips: First, apply veneer to the end panels. Once you're ready for the face frames, start with the stiles (vertical members). Cut veneer slightly wider than stile (leaving an overlap), and line up edge with top of the stile. Peel off backing and press as you go. Trim off the excess veneer. Finish by using veneer smoothing blade for optimal adhesion. Repeat the procedure on the rails (horizontal members).
- How to Renovate a Wall Cabinet with Maple Veneers and Paneling
- How to Stain Veneers to Match Hardwood Plywood Lumber
- Applying Unbacked and Sliced Veneer Sheets with Yellow Wood Glue
- Is Veneering Just for Experts?
- Veneers: Quarter or Plain Sliced?
- Bookmatch Larger Veneer Wood Sheets by Splicing and Joining
- Apply Veneer with Contact Cement
- Refacing Your Cabinets with Veneer
- Five Ways to Transform Your Kitchen
- Introduction to Veneering
- Unfinished real wood (white matte is not real wood)
- Accepts stains and finishes (white matte does not accept stains)
- 1/64" Thick (.39624 MM)
- 10 mil paper backing
55 Review(s)View All
Refacing kitchen cabinets with Ash veneer...Posted July 31, 2013
Used it to reface a bathroom...Posted July 27, 2011
Good quality, psa.Posted June 22, 2011