Retail Home PasadenaClass and Workshop Schedule |
| Pasadena Class and Workshop Schedule
83 South Rosemead, Pasadena, CA 91107 Michael Yukihiro , Store Manager Contact this store by e-mail or phone: (626) 356-9663 |
Regular Class Schedule See upcoming classes. | ||
| Date | Class | Store |
 | ||
|
November 27, 2012
5:00pm to 6:30pm (Class will meet 11/6, 11/13, 11/27, 12/4, 12/11, 12/18) |
Intro to V-carve and V-carve basics - Session 3 - with James Barge
Overview: Intro to the V-carve program for CNC Router Table. Participants must have a PC Laptop. Please Note: The cost covers all 6 sessions. Skill Level: Beginner Class Fee: $150.00 |
Pasadena |
|
November 29, 2012
5:00pm to 6:30pm (Class will meet 11/7, 11/14, 11/29) |
Turning Basics/Safety/Pen Turning - Session 3 - with Pete Carta
Overview: Learn about Turning Basics and Lathe Safety. Learn the steps to turn your own pens. Please Note: The cost is $60 plus materials. This cost covers all 3 sessions. Skill Level: Beginner Class Fee: $60.00 |
Pasadena |
|
December 4, 2012
5:00pm to 6:30pm (Class will meet 11/6, 11/13, 11/27, 12/4, 12/11, 12/18) |
Intro to V-carve and V-carve basics - Session 4 - with James Barge
Overview: Intro to the V-carve program for CNC Router Table. Participants must have a PC Laptop. Please Note: The cost covers all 6 sessions. Skill Level: Beginner Class Fee: $150.00 |
Pasadena |
|
December 11, 2012
5:00pm to 6:30pm (Class will meet 11/6, 11/13, 11/27, 12/4, 12/11, 12/18) |
Intro to V-carve and V-carve basics - Sesion 5 - with James Barge
Overview: Intro to the V-carve program for CNC Router Table. Participants must have a PC Laptop. Please Note: The cost covers all 6 sessions. Skill Level: Beginner Class Fee: $150.00 |
Pasadena |
|
December 18, 2012
5:00pm to 6:30pm (Class will meet 11/6, 11/13, 11/27, 12/4, 12/11, 12/18) |
Intro to V-carve and V-carve basics - Session 6 - with James Barge
Overview: Intro to the V-carve program for CNC Router Table. Participants must have a PC Laptop. Please Note: The cost covers all 6 sessions. Skill Level: Beginner Class Fee: $150.00 |
Pasadena |
|
January 13, 2013
11:00 AM - 1:00 PM - 3 Week Class (1/13, 1/20 and 1/27) |
Introduction to Woodworking Technology - with James Barge
Overview: Learn to use the CNC Shark. Prerequisites: Laptop. Course will be in three phases end project will be using the CNC Shark to make a sign. The introduction to the CNC Shark and V-carve program. Second phase is drawing the project assignment. Third phase is completing the drawing, assigning bits and generating the g-codes. Students will then have the opportunity to arrange a date to cut the sign out on their material. Please note that the cost is $90 plus materials. Skill Level: Beginner Class Fee: $90 |
Pasadena |
|
January 19, 2013
1/19/2013 |
Intro to Bowl Turning - with Pete Carta
Overview: Learn to turn your very own bowls. Prerequisites: Experience in spindle turning and other turning experience. Class size is limited. Please note that the cost is $45 plus materials (tool rental available). Skill Level: Beginner Class Fee: $45 |
Pasadena |
|
February 9, 2013
1:00 PM - 5:00 PM |
Candle Holder - with Pete Carta
Overview: Learn to turn candle holders. Prerequisites: Experience in spindle turning and other turning experience. Class size is limited. Please note that the cost is $45 plus materials (tool rental available). Skill Level: Intermediate Class Fee: $45 |
Pasadena |
|
March 21, 2013
5:00 PM to 7:30 PM |
Introduction to the Lathe - with Pete Carta
Overview: Learn about lathe safety and how to operate the lathe. Students will learn about the different tools used with the lathe and their functions. Please note that the cost is $60 plus materials (tool renttal available). Skill Level: Beginner Class Fee: $60 plus materials (tool rental available) |
Pasadena |
|
April 6, 2013
1:30 PM - 5:30 PM |
Intro to Bowl Turning - with Pete Carta
Overview: Learn to turn bowls on a lathe. Prerequisites: Experience in spindle turning and other turning experience. Class size is limited. The skill level is Beginner to Intermediate. Please note that the cost is $45 plus materials (tool rental available). Class Fee: $45 |
Pasadena |
|
May 4, 2013
1:00PM - 5:00 PM |
Basic Lathe Turning - with Pete Carta
Overview: Learn to turn on a lathe with Pete Carta. This is a beginner lathe class with emphasis on safety and basic lathe operation. Class size is limited to four students. Requires eye protection. Tool rental is available. Skill Level: Beginner Class Fee: $45 + materials |
Pasadena |
|
May 18, 2013
1:00PM-5:00PM |
Basic Woodworking Shop - with Bryan Sharry
Overview: Learn about the woodworking power tools in the shop. Includes safety and operation of the table saw, drill press, bandsaw, router table, scroll saw, planer and dust collection. Beginning level and open to all. Skill Level: Beginner Class Fee: $50 |
Pasadena |
|
June 1, 2013
1:00pm-5:00pm |
Introduction to Pen Turning - with Pete Carta
Overview: Learn to turn pens on a lathe. An introduction to turning a pen on a lathe. Students will learn to turn a 7mm pen on a lathe from prep to finish. Emphasis on safety and eye protection is required. Tool rental is available. Skill Level: Beginner Class Fee: $45 + materials |
Pasadena |
|
June 15, 2013
1:00PM-5:00PM |
Basic finishing techniques - with Nancy Garcia
Overview: Learn about stripping, staining, and finishing. Introduction to different products Rockler sells and how to use them to complete your woodworking project. Skill Level: Beginner Class Fee: $45 |
Pasadena |
| Back to Pasadena Store Page |
(3)