Rockler Woodworking and Hardware - Pittsburgh Previous Store Classes

Pittsburgh Class and Workshop Schedule
7402 McKnight Road, Pittsburgh, PA 15237
Dan Brown, Store Manager
Contact this store by e-mail or phone: (412) 364-7751

Regular Class Schedule See upcoming classes.
Date	Class	Store

January 27, 2013 12pm - 3pm	Introduction to Routers and Router Tables - with Stan Kirkavitch Overview: This session will explain the benefits of Router Tables, Lifts and set up tools including set up blocks, set up bars and height gauges. Learn the proper set up and use of the router table including using the fence and fulcrum pin as well as the correct speed settings for your router. Also learn basic hand routing techniques and safety. You will also learn the correct direction for hand routing as well as climb routing. Skill Level: Beginner Class Fee: $25	Pittsburgh

February 24, 2013 12pm - 3pm	Preparing Boards for Glue up using a Jointer and Planer - with Stan Kirkavitch Overview: Gluing smaller boards together to make larger boards is something that every woodworker will need to do if you are making larger projects. It isn't difficult if you know the secrets. Join Stan to learn how to use the jointer and planer to machine wood for perfect glue ups. Learn the proper way to clamp and glue boards to ensure they stay together. Learn the secrets of making large boards that won't warp over time. Skill Level: Beginner Class Fee: $25	Pittsburgh

April 21, 2013 12pm - 3pm	Introduction and Installation of Concealed (European) Hinges - with TBD Overview: Learn the differences between Face Frame and Non Face Frame concealed hinges including how to determine the "overlay" for both style of hinges. Learn how to install hinges using various jigs for routers and Forstner bits. Also learn the implications of door edge profiles and how they impact the installation of concealed hinges. Skill Level: Beginner Class Fee: $25	Pittsburgh

May 19, 2013 12pm - 3pm	Pen Turning - with TBD Overview: In this session you will produce a fine writing instrument from start to finish. Learn parts preparation, tools and equipment needed for turning pens, plus finishing and assembly of your own pen. 7mm pen kit and blank (Rocklers choice) provided. Limit three per class. Skill Level: Beginner Class Fee: $25	Pittsburgh

June 23, 2013 12pm - 3pm	Finishing (Demonstration and Lecture) - with Stan Kirkavitch Overview: Learn how to produce a fine finish from sanding to top coats. Materials will include pigmented stains, dye stains, oils, oil finishes, shellac and Arm-R-Seal. Proceedures will include the proper sanding schedule, scraping with a card scraper, "building" a finish and finishing products application methods. Beginner, Intermediate, Advanced Class Fee: $25	Pittsburgh

July 21, 2013 12PM - 3PM	Turning Tap Handles - with Chuck Meyers Overview: Building your own bar? Adding a keg system to your existing bar. There are some tricks that you should know to make this project easier to complete. Learn the techniques necessary to make this innovative in a three hour class with our own associate Chuck Meyers. Skill Level: Beginner Class Fee: $25	Pittsburgh

August 18, 2013 12PM - 3PM	Tuning and Sharpening Hand Planes - with Chuck Meyers Overview: A hand plane can be a great tool for many woodworking applications, but only if it is set up correctly for the purpose it will be used. Learn how to properly set up and sharpen both new and antique planes to produce the proper cut for you project. Skill Level: Beginner Class Fee: $25	Pittsburgh

Back to Pittsburgh Store Page