Figured it out easily. I had to adapt it to use in my cable driven Craftsman, but that was very easy also. Only bend the pin and drill a hole for the locking screw.

These do NOT fit a Delta 10" Bandsaw Model 28-195 purchased  in about 2001. They are large in the O.D. and the raised lower section. However, they can be made to fit perfectly by trimming the O.D. on your bandsaw using a centering hole on a jig. Then turning the lower section on your router table. BOTH of the processes take multiple steps and careful handling.

I'm an intermediate woodworker/hobbyist with a small setup in the basement. My shop is about 30'x30' and despite meticulously using a shop-vac with my tools I had a serious issue with small to fine dust everytime I worked on a project. I recently reorganized all my tools! hand and power, onto multiple peg boards for accessibility which made it all the more necessary to minimize the dust. The install was a breeze! I opted to hang it from the ceiling joists. Have been using it for the past few weeks, using the timer option and so far there is no accumulation of dust anywhere. This product works far better than I'd hoped for, the noise is barely noticeable on low & medium. If you have hearing protection in then it's even difficult to hear it on high. The unit was in perfect working order out of the box,...

Read all reviews for Jet 1000CFM Air Filtration System w/Remote Control (AFS-1000B)

I normally run Lignum Vitae guide blocks in my saw that I cut myself, and they work really, really well. But I was given a set of these by a friend and decided to try them in my saw {a 1940's 12" Walker-Turner, awesome saw!}. They work about as well as my wooden blocks did at a substantially higher price. I guess if you just want something to plop right in, these would be the way to go.

Amazing Improvement! I have a Jet DC-1200FS which I purchased from Rockler a number of years ago. I've never been very happy with its air flow volume or amount of suction. It just didn't draw enough air to properly collect dust and chips from even one machine, nor, did a do a very good job of vacumning the floor. I just replaced the original bag with this Shaker bag and it turned my DC-1200FS into the dust collecter I've always wanted. The airflow and suction are dramatically higher even with two 4" hoses at once. Today I had it hooked to both my planer/jointer and my table saw without gates to shut either off and it was doing a far superior job to what it has ever done before! And, I believe it is filtering finer dust than the old bag did as well. What a fantastic upgrade....

Read all reviews for Shaker Felt Dust Collection Bags