|
Search Results for Reviews
Home
Rockler Reviews
Reviews_Home
$50 - $100
|
Narrow Results by Category:
|
|
|
Sort By:
|
Showing 1 - 8 of 305 | Next
|
|
| |
| |

|
$77.99
(Average rating from all reviews)
Review 1 of 41:
Platform should be larger, too small for wide boards. Handle location precludes using full width of platform. Shorter T bolts are too short, barely engage. Instructions provided are skimpy, printed on the box. Platform did not reach blade on my Powermatic 2000, so zero clearance using miter bar is not possible.
Read
all reviews for Taper / Straight Line Jig
|

|
(Reg. $79.99) Now $69.99 SAVE 12%
(Average rating from all reviews)
Review 1 of 56:
Works great and catches tons of material. I've emptied this container 4 times since purchase and will probably only empty my shop vac on the 5th time. The only two things I have found are it easily tips over when freshly emptied if you give a slight tug on the vac hose. Once it's about 1/3 full it becomes stable. It also does not stop the really fine stuff from clogging the vac filter. Fine dust that would come from a power sander is what I'm talking about so be prepared to clean your filter a few times if you do a lot of power sanding as the Dust Right doesn't not catch the really fine stuff. If you use it primarily on your table saw or router table you should be perfectly happy.
Read
all reviews for Dust Right® Dust Separator
|

|
$79.99
(Average rating from all reviews) (Average rating from all reviews)
Review 1 of 29:
I think I am going to use these on the table saw stand I am building using 8020inc's 1-1/2 aluminum extrusions. I'll just need to enlarge the mounting holes to accept the 5/16 SHCS.
Read
all reviews for Workbench Caster Kit (4 Pack)
|

|
$98.99
(Average rating from all reviews)
Review 1 of 62:
I bought this heavy duty retractable extension cord to go over my workbench. It is hard to find 12 AWG cords. I really liked the strong spring retraction and the adjustable stop on the cord. However, when using the three receptacle end, it was so hard to insert plugs, I hated changing tools. After not very long, I cut off the end and replaced it with a metal electrical box and two good quality duplex receptacles. I then had 4 outlets that were easy to use and I was happy for about 2 years. Then the unit failed. I took it apart and found that the rotary sliding contacts inside had gone bad, heated and melted the plastic in the contact area inside - there was no way to repair it. This is supposed to be a 20 amp cord - I don't think I ever used a...
Read
all reviews for 12-Gauge Retractable Extension Cord Reel
|

|
From $49.99
(Average rating from all reviews)
Review 1 of 2:
I only gave this product 3 stars, mostly because of a few issues I had with the set. With a majority of letters needing two passes, I can understand the lack of certain multiple letters, but I was surprised at the number of single letters in the kit. I ended up laying out the second letter on my sign so I could match the spacing properly. While I can understand using plastic for the letters, I also chewed a couple due to a slight height difference in the cherry wane I was using. The bushing simply rode out of the slot. That was bound to happen with any system when the wood isn't perfectly flat, but since the letters are plastic and you don't always get more than one letter, my first sign with this kit may be the last unless I order another kit. But that said, I think...
Read
all reviews for Rockler Interlock Signmaker's Templates - State Park Font Kits
|

|
(Reg. $84.99) Now $74.99 SAVE 11%
(Average rating from all reviews)
Review 1 of 15:
Jig does a great job at aligning holes even in tall cases. You can also adjust the edge to hole distance easily by adding thin spacers on each side. Two problems - the lower washer on the drill bit wears out after five floor to ceiling cases and a jam they happen will twist and deform the spring. PAY ATTENTION when you replace the drill! there is a special one for this jig that is different from other jigs Rockler sells.
Read
all reviews for Pro Shelf Drilling Jig
|

|
$79.97
(Average rating from all reviews)
Review 1 of 7:
I purchased this saw blade for my table saw a few months ago. It hung on the wall waiting for a project until I started working on some end grain cutting boards for Christmas presents. I wanted the glue-ups to be as clean as possible, on went the new blade. Two inches into the first piece of walnut and two teeth broke off the blade. I found where the teeth broke off and there was no sign of anything foreign in the wood. I called Rockler up and they immediately sent me a replacement blade. In the meantime, I continued to use the blade, which produced smooth, clean cuts. I chalk the broken teeth up as a fluke and I'm getting ready to buy another blade for my miter saw. Great product, but the real reason for this review is the customer service at...
Read
all reviews for 10'' Freud Premier Thin Kerf Fusion Saw Blade, with FREE $30 Gift Card!
|

|
(Reg. $61.52) Now $39.99 SAVE 34%
(Average rating from all reviews)
Review 1 of 8:
Completely amazing! After testing the regular cookies, I immediately ordered an 8 pack of Plus cookies and all accessories I could find when the offer dropped into my mailbox. Now I have a dozen of these little gems. They serve perfectly to support difficult-to-fasten items for routing, sawing and even just for scratch-free support of projects. My only wish is a neat box with compartments to hold the accessories! probably a side-project to squeeze in between other projects.
Read
all reviews for Bench Cookie® Plus Master Kit
|
Showing 1 - 8 of 305 | Next
|
|