Overview
18-piece Rockler/Insty-Drive self-centering and countersink set lets you convert from drilling and countersinking to installing perfectly centered hinge screws in a matter of seconds - without re-chucking any bits! The 18-Piece set includes #6, #8 and #10 HSS 2-flute tapered hex shank bits with 4-flute countersinks; #6, #8 and #10 hex shank HSS self-centering bits; Rockler's Insty-Driver; 10 of the most popular drive bits; and a nylon pouch with belt loop.
- Switch from drilling to driving instantly!
- Just drill the pilot hole, slip on the Insty-Driver and drive home the screws.
- Components are engineered to meet the highest standards for use in industrial applications.
- All Rockler/Insty-Drive bits are precision-ground high speed steel that resist wear and overheating, thus keeping a sharp edge longer.
- Bits can be resharpened easily on a bench grinder.
- Inluded self-centering bits ensure accurate hinge and hardware installation every time.
- Countersink has a 4 flute design for smooth, clean holes that do not require sanding.
- Taper drill bit is adjustable to match length of screw and is held with 1 or 2 hex set screws.
How the Rockler/Insty-Drive System Works:
- Step 1: Drill the pilot hole with the countersink bits or the self-centering bits, which both have a hex shank to prevent slipping.
- Step 2: Slip on the Rockler Insty-Driver which fits over Rockler countersink and self-centering bits. Magnetic tip holds all 1/4'' style insert bits and screws.
- Step 3: Drive home the screws. Then slip off the Insty-Driver and do it again. You'll get fast and accurate hardware installation every time!
Tech Spec
| Brand | Rockler |
|---|---|
| Manufacturer Part Number | 79002-31 |
| Weight (lbs) | 1.3300 |
| Bit Material | High Speed Steel |
| Bit Type | Insty-Drive |
What's included:
(3) HSS Tapered Hex Shank Bits with Countersinks: #6, #8 and #10
(3) HSS Hex Shank Self-Centering Bits: #6, #8 and #10
(1) Rockler Insty-Driver
(10) of the Most Popular Drive Bits
(1) Nylon Pouch with Belt Loop
Reviews
The drill bits are great...no problem...
Posted September 6, 2007
The drill bits are great...no problem with them at all.The only thing wrong with this product is it's case. The case is open on the sides and the elastic bands do not keep the countersink bits in the case. If you walk with them and tilt the case the bits can fall out. I have lost 4 bits due to this.
I received this for Christmas and...
Posted January 1, 2007
I received this for Christmas and have already used it several times. What a great set! The counter bores and stops lock onto the bits in any position. The set includes all the sizes you could need plus the drivers for just about any screw! Very heavy duty construction too! Should last a lifetime.
Videos
Related Products
Swipe to see more
You may also like
Swipe to see more
