- Pitch & Resin Remover is easy to use.
- Spray and coat thoroughly all surfaces. Let stand 5-8 minutes prior to using a cloth, brush or steel wool to remove residue.
- 1 quart concentrate makes 1 gallon of remover when mixed 1 part to 3 parts water, or can be used full strength if necessary.
- A shallow baking pan works well for soaking saw blades, plane knives and other flat cutting instruments.
- Use a jar-shaped container for soaking router bits, shaper cutters and drill bits.
- When buildup is heavy, re-apply as necessary.
- This solution may be sprayed to reach crevices and locations where additional cleaning is required.
- Dry tools thoroughly to avoid rusting while in storage.
- CAUTION: Not intended for consumption. If ingested, rinse mouth, give water and seek medical attention. Persons with allergic reactions should wear gloves to avoid skin contact. KEEP OUT OF REACH OF CHILDREN.
8 Review(s)View All
Works well and is more economical...Posted November 14, 2010
Sprayed on blade, let it sit...Posted October 9, 2010
I cleaned two rip blades, two...Posted June 17, 2010