Dovetail Jig shown with Dust Collector  Zoom

Exclusive

Rockler's Complete Dovetail Jig with Dovetail Jig Dust Collector Combo

Item #: 23777
$205.98
Kit In Stock (online only)
Keep your shop clean and wallet happy with this combo offer featuring our most versatile dovetail jig ever!

Overview

Cutting beautiful through and half-blind dovetails is fast and easy with our new and improved dovetail jig! Rockler's exclusive one-piece stop gives you the perfect offset every time for dead-on dovetailing accuracy. And our new preset template guide allows for quick initial setup for 1/2" to 3/4" thick stock. Jig will cut half-blind dovetailed joints from 1/2" to 1-1/8" thick and full through dovetails from 3/8" to 3/4" thick. Accommodates stock up to 11" wide.

  • Requires router with 1/2" collet.
  • 8mm diameter bits are 25% larger than typical 1/4" bits, reduce chatter and fit all existing Rockler dovetail jigs.
  • Preset template and fence locations clearly marked for standard thickness stock.
  • Clamping bars include abrasive surface to grip stock and prevent slipping.
  • Depth gauge on template for setting dovetail bit height for half-blind joints.

Complete Dovetail Jig Combo Includes:

  • Two durable phenolic templates
  • Dovetail Jig Dust Collector with 2-1/4'' Port
  • Three 8mm shank carbide-tipped router bits (1/2" x 14° dovetail, 1/2" x 8° dovetail, 5/16" straight)
  • 1/2" to 8mm collet adapter
  • 7/16" guide bushing fits most routers
  • Detailed eight-page instruction booklet
  • Quick reference guide for standard joints

Rockler Dovetail Jig Dust Collector:

You don't have to spend hundreds of dollars to get dust collection with a dovetail jig. Our revolutionary new dust collector eliminates virtually all the dust created when cutting dovetails. It easily attaches to Rockler's Dovetail Jig and a shop vacuum or dust collection system to provide you with a clean cutting area and safe working conditions.

  • Easily attaches to Rockler's dovetail jigs
  • Built-in 2-1/4" port fits most shop vac hoses (not included).
  • Sliding baffle directs the dust collection to where the dovetails are being cut.
  • Sweep brush adjusts to provide a complete seal for stock thicknesses of 1/2" up to 1-1/8".
  • Contains the dust while allowing the bit to travel through without damage.
  • Two extra long 4" knob posts make adding your dust collector shroud easy.

Tech Spec

Brand Rockler
Weight (lbs) 27.1800

What's included:

(1) Dovetail Jig (1) Dovetail Jig Dust Collector (2) Phenolic Templates (1) 1/2'' x 14° x 8mm Shank, Carbide-Tipped Router Bit (1) 1/2'' x 8° x 8mm Shank, Carbide-Tipped Router Bit (1) 5/16'' x 8mm Shank, Straight Carbide-Tipped Router Bit (1) 1/2'' to 8mm Collet Adapter (1) 7/16'' Guide Bushing (fits most routers) Detailed eight-page instruction booklet Quick reference guide for standard joints

Technical Downloads:

Reviews

Customer Reviews

131 Review(s)

View All

It works like it supposed to work.

Ron Posted January 7, 2014
I almost didn't buy the Rockler Dovetail Jig because of some of the reviews. I have always had great service and quality from Rockler. I relied on that history and placed the order. Less than 1 hour after removing the jig from the packing box we were making drawers with great results. The jig performs as it should, producing the results I expect. It gets 5 stars from me.

Takes a little work but it...

Jim B from Colorado Springs, CO Posted February 25, 2013
Takes a little work but it really shows up well.

I've used three DT jigs -...

Daniel W from Etiwanda, CA Posted January 29, 2013
I've used three DT jigs - the old blue Rockler, a Porter Cable and this. By far this is the best I have used. The old blue Rockler jig was at best fiddely. Some of the adjustment were almost impossible to make without taking the jig apart. With the Porter Cable it is very difficult to make drawer sides out of baltic birch. There is a ton of tearout and you can't use material less than 1/2". The new Rockler jig is easy to set up and use. I really like the way you can back rout a scoring line before you plunge in. The helps tame tearout. I would highly recommend this jig.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • Rockler Complete Dovetail Jig
  • Rockler Dovetail Jig Dust Collector
  • Rockler Dovetail Jig: Through Dovetailing Demo
  • Rockler Dovetail Jig: Half-Blind Dovetailing Demo

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X