Cut perfect through and half-blind dovetails with one jig!  Zoom

Sale

Rockler Complete Dovetail Jig

Item #: 22818

Regular Price: $164.99

Special Price $139.99

Each In Stock
Our best and most versatile dovetail jig ever!

Overview

Cutting beautiful through and half-blind dovetails is fast and easy with our new and improved dovetail jig! Rockler's exclusive one-piece stop gives you the perfect offset every time for dead-on dovetailing accuracy. And our new preset template guide allows for quick initial setup for 1/2" to 3/4" thick stock. Jig will cut half-blind dovetailed joints from 1/2" to 1-1/8" thick and full through dovetails from 3/8" to 3/4" thick. Accommodates stock up to 11" wide.

  • Requires router with 1/2" collet.
  • 8mm diameter bits are 25% larger than typical 1/4" bits, reduce chatter and fit all existing Rockler dovetail jigs.
  • Preset template and fence locations clearly marked for standard thickness stock.
  • Clamping bars include abrasive surface to grip stock and prevent slipping.
  • Depth gauge on template for setting dovetail bit height for half-blind joints.

Complete Dovetail Jig Includes:

  • Two durable phenolic templates
  • Three 8mm shank carbide-tipped router bits (1/2" x 14° dovetail, 1/2" x 8° dovetail, 5/16" straight)
  • 1/2" to 8mm collet adapter
  • 7/16" guide bushing fits most routers
  • Detailed eight-page instruction booklet
  • Quick reference guide for standard joints

Tech Spec

Brand Rockler
Weight (lbs) 24.0000

What's included:

(1) Dovetail Jig (2) Phenolic Templates (1) 1/2'' x 14° x 8mm Shank, Carbide-Tipped Router Bit (1) 1/2'' x 8° x 8mm Shank, Carbide-Tipped Router Bit (1) 5/16'' x 8mm Shank, Straight Carbide-Tipped Router Bit (1) 1/2'' to 8mm Collet Adapter (1) 7/16'' Guide Bushing (fits most routers) Detailed eight-page instruction booklet Quick reference guide for standard joints

Technical Downloads:

Reviews

Customer Reviews

131 Review(s)

View All

lower cam clamp

straightbowed Posted January 16, 2014
Some are saying the lower cam clamp is in the way, turn it around so it clamps on the down stroke this is easy to do by removing the clamp bar bolt and simply swithching the lever to the left, have a sawdusty day.

Takes a little work but it...

Jim B from Colorado Springs, CO Posted February 25, 2013
Takes a little work but it really shows up well.

I've used three DT jigs -...

Daniel W from Etiwanda, CA Posted January 29, 2013
I've used three DT jigs - the old blue Rockler, a Porter Cable and this. By far this is the best I have used. The old blue Rockler jig was at best fiddely. Some of the adjustment were almost impossible to make without taking the jig apart. With the Porter Cable it is very difficult to make drawer sides out of baltic birch. There is a ton of tearout and you can't use material less than 1/2". The new Rockler jig is easy to set up and use. I really like the way you can back rout a scoring line before you plunge in. The helps tame tearout. I would highly recommend this jig.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • Rockler Complete Dovetail Jig
  • Rockler Dovetail Jig: Half-Blind Dovetailing Demo
  • Rockler Dovetail Jig: Through Dovetailing Demo

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X