Overview
Adjust bit height quickly and easily from atop your router table, and enjoy sag-free support from the heavy-duty plate. The plate is perfectly sized to fit all of our new router tables, while the lift housing accepts a wide range of small-to-medium sized routers.
Will the Lift FX work with my router?
The Router Lift FX Plus accepts the following routers:
- Bosch 1616
- Bosch 1617
- DeWalt 610
- DeWalt 616
- DeWalt 618
- Bosch 1618
- Porter-Cable 690 series
- Porter-Cable 890 Series
- Compatible with large opening inserts
What's included
(1) Rockler Aluminum Router Lift FX
Technical Details
- Plate measures 8-1/4" x 11-3/4" x 3/8"
- Insert plate's center hole (3-11/16" overall dia.) accepts larger raised panel bits and includes an insert ring with a 1-1/2" bit opening.
- Brand: Rockler
- Weight (lbs): 12.1500
Product Warnings
WARNING This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product Technical Downloads
Related Articles
Frequently Bought Together
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 60 questions
Browse 60 questions
and 139 answers
Why did you choose this?
Rockler Store
better than the way I have been been doing it...taking router in and out for adjustments
Erik J
on May 17, 2017
i like the ease of adjustment
Ken D
on Apr 10, 2017
better than the way I have been been doing it...taking router in and out for adjustments
Erik J
on May 17, 2017
because i am just a woodworking hobbyist an its in my price range
Albert J
on Apr 20, 2017
Will this lift work in a Bench Dog Protop router table?
Will this fit an old Black and Decker 7640 router?
will this lift accept the Kreg PRS3040 Precision Router Table Insert Plate Levelers?
BEST ANSWER: The Kreg PRS 3040 levelers are designed to use in a table opening with a 3/4" radius on each corner. The radius on the Rockler Router Lift FX is 3/8". This difference would create a void that could hinder the optimal operation of your table.
- Reply
- Inaccurate
- David Staff on Apr 24, 2015
can I use 1613 evs in fx lift?
Will this fit on the Bosch 1181 Router table? Think the 11 3/4 inch measurement is fine but the 8 1/4 inch measurement is too short.
BEST ANSWER: This will only be suitable for tables that use an 8-1/4" x 11-3/4" plate size.
- Reply
- Inaccurate
- Steve Staff on May 14, 2015
Will a Hitachi M12VC fit in this lift?
Will it fit in the Kreg router table? I can't find the insert dimensions.
BEST ANSWER: The lift has a 3/8" corner radius so it will not fit a table with a 3/4" corner radius. However, it can be adapted to a table having a 3/4" radius by filing the corners on the lift down to a 3/4" radius. The insert is aluminum so this wouldn't be a difficult task.
- Reply
- Inaccurate
- Halfmoonbear on Jan 15, 2016
It states what routers its for, but when it shows dewalt router it has an aster behind it. I can't find out why, does any body know?
BEST ANSWER: I use the lift table with a Dewalt (DW618) router motor with no issue. I bought a foot peddle because reaching under the table to turn the router on and off was not always convenient, but the motor works well.
- Reply
- Inaccurate
- Bruce B on Apr 22, 2015
- Purchased on Mar 4, 2015
I have one of Rockler's older table-tops without the screw hold-down in the corners. Will the plate sit flat in that? Are the "newer" plates thicker, bigger, etc...?
BEST ANSWER: Sorry I do not have a direct answer but, You could install your own threaded inserts. This would allow for some adjustment. Most all table plate holes, are slight deeper then needed. This is allows for some depth adjustment. If your table is made of wood or Composite, it would be possible for you to use your own router to modify the depth of the hole. Then it could match the hole size needed or modify the table to provide height adjustment. Hope this helps
- Reply
- Inaccurate
- Adam D on Nov 20, 2015
- Purchased on Sep 23, 2014
I have a Porter Cable 895 router kit with its own crank system. Why would I need a $200+ Router Lift FX or similar unit instead of a $60 router plate?
BEST ANSWER: A plate will suffice, the lift will give you stability and precise adjustment advantage.
- Reply(1)
- Inaccurate
- Tab P on Jan 3, 2016
- Purchased on Mar 13, 2015
What is the silver screw for that has an approximate 1 " bushing on it?
BEST ANSWER: It fits in the hole to the right of the bit. It's used in conjunction with a bit with a bearing to assist in guiding and stabilizing the work piece.
- Reply
- Inaccurate
- Gary F on May 11, 2015
- Purchased on Mar 22, 2015
What replacement insert goes with this plate? I would like to buy some blanks and make my own holes.
BEST ANSWER: I don't know which replacements fit, but I wish the plate allowed locking inserts.....
- Reply
- Inaccurate
- Richard T on Aug 7, 2016
- Purchased on Mar 3, 2015
Will this work with a Porter Cable 7518 router?
BEST ANSWER: No the 7518 is too big for this lift. I tried it and had to send it back.
- Reply
- Inaccurate
- Michael P on Apr 25, 2015
- Purchased on Feb 25, 2015
I have the bosch RA1171 router table. I am wondering if this will fit my router table?
I plan on building this into a new workbench. How much room should I plan on, beneath the table when the motor is in the stowed position? I have a 690 Porter Cable Motor. Thanks
BEST ANSWER: I just measured my set up. It is 8" from the bottom of the table to the bottom of the router when it all the way down. You may want to add another inch just for good measure.
- Reply
- Inaccurate
- Edward N on May 11, 2017
- Purchased on May 26, 2015
Are the inserts held on merely by screws? Is there some form of quick removal? Having to undo a bunch of screws any time i need to change inserts is a huge design flaw and a deal breaker for me.
BEST ANSWER: Initially the three screws seemed somewhat bothersome however after that initial experience , I kept my small battery powered screwdriver with a magnetic tip to remove and replace the screws . Placing the screws in a small shallow container to keep them from wandering off helped as well. I am now thankful for a secure and easy way to keep the insert in place .
- Reply
- Inaccurate
- Tim R on Mar 9, 2017
- Purchased on Mar 11, 2015
Does it come with the crank?
BEST ANSWER: Yes. It does come with crank
- Reply
- Inaccurate
- Ronald W on May 18, 2017
- Purchased on Aug 17, 2015
What is the lift range on the Rockler Router Lift FX? Will I be able to change out bits above the table or is it necessary to remove the assembly from the table?
BEST ANSWER: You don't have to remove the router to change the bits, I can raise the collet above the table, reach under to push in the detent pin and just use the wrench on the collet.
- Reply
- Inaccurate
- Carl H on Nov 15, 2016
- Purchased on Mar 22, 2015
Will the router lift accept Makita half inch routers?
BEST ANSWER: I am not sure. I have a DeWalt, and it lifts 1/4 and 1/2 inch shank cutters. Deeper in the description of this product is the list of compatible routers.
- Reply
- Inaccurate
- Gilbert M on Oct 31, 2015
- Purchased on Mar 5, 2015
I have the Porter Cable 890 motor and it seems like I have to take the plate insert out (3 screws) before I can change bits. Does this seem correct? And even with the plate insert removed, I still can't reach the spindle lock button so I have to wedge the spindle wrench in to the bottom nut at a weird angle and then use a second wrench to loosen the nut. Am I doing something wrong or is this the intended procedure? I've used other lift/router combinations where it was trivial to change bits above the table.
BEST ANSWER: hi dave you should be able to crank the router up high enough with the height adjuster .if not check how you have the router mounted in the holder you may need to re-adjust the router higher in the holding mount. you should be able to use the two wrenches to change the bites .one on the shaft an one on the locking nut. If your using a wide bite like a 1/2" rounding bite you'll have to change the plate with a bigger hole .goodly luck
- Reply
- Inaccurate
- roland m on May 16, 2016
- Purchased on Mar 8, 2015
Will my Rigid r2200 router fit?
BEST ANSWER: I have a Black and Decker motor assembly in mine. I suspect that a motor assembly for Ridgid r2200 would also fit but am not sure.
- Reply
- Inaccurate
- Brent P on Jun 26, 2017
- Purchased on Jul 5, 2015
HOW HIGH IS THE ROUTER LIFT?
BEST ANSWER: From the bottom of the plate it's 7.75 ". The height of the bit will vary on how long of a bit you use. I have a bit 2.25" long and I do not raise the lift at all from the bottom position. Hope this will help you.
- Reply
- Inaccurate
- Tom R on May 15, 2017
- Purchased on May 28, 2015
What is the approximate height (+/- 1") from surface of the plate to bottom of the router motor with the router installed?
BEST ANSWER: mine is mounted at 9.25 inches
- Reply
- Inaccurate
- Paul A on Nov 28, 2016
- Purchased on Feb 9, 2015
Does the lifter include the plate as well ?
BEST ANSWER: Yes, it does. The plate is attached to the lift, so all you have to do is make the cut out in your table for the plate and install your router to the lift.
- Reply(1)
- Inaccurate
- Charles M on Mar 24, 2016
- Purchased on Feb 6, 2015
I've been researching router lifts. One of the negative thing people say is the lift moves up or down from vibration. Does this lift has a lock on it so it won't move? I seen that it has a set screw, is it sufficient?
BEST ANSWER: There is a thread tension adjustment, Ive never had an issue with lift height. Even using 3" bits on a 2hp router.
Its not a jessem or bench dog etc but its half the price and does a good job.
Its not a jessem or bench dog etc but its half the price and does a good job.
- Reply
- Inaccurate
- Tab P on Mar 22, 2016
- Purchased on Mar 13, 2015
Does this lift come with mounting and leveling screws?
BEST ANSWER: Yes it does. Had no problems in setting up the lift on my router table. Works great.
- Reply(1)
- Inaccurate
- Danny O on Mar 6, 2016
- Purchased on Mar 13, 2015
Will it fit a Makita RP1800 router?
BEST ANSWER: Used a porter cable 6931
- Reply
- Inaccurate
- Thomas M on Nov 2, 2015
- Purchased on Mar 14, 2015
Wondering if this would hold a Bosch 1615 ?
BEST ANSWER: Sorry, but I have no idea, all that I can tell you is a 3in Diameter motor will work. I'm using a Porter Cable 890.
- Reply
- Inaccurate
- Juan A. S on Sep 28, 2015
- Purchased on Mar 8, 2015
How do I lock the lift after the desired height? My router slowly lowers while in use. I can watch the set screw rotating while the router is on.
BEST ANSWER: You may need to re-adjust the thread tensioning. The instruction for re-adjusting the thread tensioning are given on page 4 on the right hand side http://go.rockler.com/tech/RTD10000606AD.pdf under the heading the reads ‘Installing the router’.
- Reply(3)
- Inaccurate
- Steve Staff on May 12, 2015
What is the range of router motor diameters that will fit this lift?
BEST ANSWER: The Router Lift FX is designed to accommodate routers with a 3 1/2" diameter motor
- Reply
- Inaccurate
- David Staff on Jun 14, 2017
Reviews
4.4 / 5.0
116 Reviews
Depth inconsistent and inserts flex
Even though I have adjusted the tension screw to maximum tension, I find that I have to reset the depth several times during production runs. Also, the plastic inserts that are provided flex near the bit - causing further fluctuation in the depth of the cut. At a cost of $200 this product should at least come with metal insert plates. I would not recommend this product., and I am going back to my home-built system.
- Was this review helpful? Yes (39) No (5)
- Flag as Inappropriate
- Was this review helpful? Yes (39) No (5)
- Flag as Inappropriate
I also found the lift height...
I also found the lift height adjustment to creep some from vibration with the half inch shaft bits. I tightned the lift height screw per the instructions and still experienced a slight creep. I solved it by adding a 9/16 nut to the height adjustment screw. I now set the bit height and run the nut up as far as it will go, then "lock" it in place. No more problems!
- Was this review helpful? Yes (22) No (0)
- Flag as Inappropriate
March 10, 2009
- Was this review helpful? Yes (22) No (0)
- Flag as Inappropriate
Some Issues
I don't have a basis of comparison as this is the first lift I have used, but it didn't impress me with the design execution. The socket recess for the crank handle is a sawdust collector and has to be cleaned out regularly or the debris compresses in it to the point that the crank can't be operated. I had to tighten the pressure on the rubber washer assembly tighter than indicated on the instructions to keep the lift from losing the depth setting. The tighter adjustment makes the crank harder to turn, but not enough to be a big deal. Aside from those two issues it works good enough to meet my needs. A removable plug for the crank socket would be a big boon and another insert or two with different diameters would be helpful.
- Was this review helpful? Yes (11) No (1)
- Flag as Inappropriate
January 30, 2015
- Was this review helpful? Yes (11) No (1)
- Flag as Inappropriate
The customer service was great. I...
The customer service was great. I received my order in just a couple of days. I had to resize the cutout in the top of my Bosch router table which I knew I would have to but it came out very well. The FX lift fit my Porter Cable 890 router like a glove. I give the Rockler Lift FX two thumbs up. It works perfectly, and at the sale price I don't believe you can top the value or the quality either one.
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
October 6, 2011
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
Overall it is a good setup. I use my router a lot more then ever.
Everything works well. Mine is the aluminum plate and it is about 4 or 5 years old. One thing you have to keep an eye on is the tension adjustment. You never know when the router will start to slid down very slowly. Just enough to mess up the cut. Doesn't happen often. The other thing needed is an insert plate with a hole somewhere between the 1-1/2 " opening and 4-5/8 overall opening. I have bits that are 1-3/4" OD. Trying to work with an opening 4-5/8" is rather deadly, little support for the wood. Editor's note: For a larger opening one can use the 36377 insert which has a 2-1/2" opening, or one can use the 61472 blank insert and drill in to any size opening.
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
March 8, 2014
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
I purchased the Router Lift FX...
I purchased the Router Lift FX to use with a Porter Cable 890 series router motor. To make a statement that this router lift is designed to be used with the 890 series is kind of a stretch of the truth. When you want to raise the height of the unit to change a bit, you quickly find that the little shaft lock feature that Porter Cable put on this series limits the height that you can raise the chuck. The result are that you still have to reach under the router table to press the little button before you can replace the bit. I solved this problem by replacing the Porter Cable router motor with a Bosch 1617EVS and not everything works perfectly. The other reason that I changed to the Bosch router is that I wanted to install an Eliminator RC quick change chuck on the motor to make it easier to change chucks and it seems that there is not a unit that will work on the Porter Cable router due to what I am told to be inadequate number of threads on the shaft of the router. With the Bosch motor installed, everything seems to work perfectly. Only one thing that I would change, Rockler did not do anyone a favor when they made their insert plant held down with screws.
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
September 4, 2009
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
Rockler Router Router Lift FX
This lift made routing so easy and so much fun. I built a router cabinet several months ago and purchased a Bosch 1617 2.25 HP Router. I couldn't see paying $300.00 for a lift so when Rockler's lift went on sale I jumped and glad I did The lift was easy to install with no hitches. Before I had to either reach under the cabinet or try to use the hex wrench Bosch supplied to raise the router from above. This would not always work well and limiter the raising height. Great Lift!
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
I too was attempting to use...
I too was attempting to use this with a Dewalt 618 and broke the adjustment "bolt" the day it arrived. Seems (at the time) they are having an issue with the Dewalt's not fitting properly. Rockler was very good about sending a replacement, with a plastic shim and it works well. I may take Russ Jones advice and modify the unit properly though.Also, I had to add a .25mm shim to the plastic insert to get it to lay flush with the aluminum plate.Upon using it the first time, the bit crept down on me and just about ruined my project! I preformed the adjustment as per the manual,(wish I had known about that AHEAD of time!), and it works fine now. Will also take Mr. Jones advice on this one, but then I would have to climb underneath to tighten the nut. What I was trying to avoid! Really don't like the "friction" method of preventing drift. Doesn't instill confidence UNLESS it's tight enough. Then it's acceptable.The manual was not proof read by anyone who uses the unit. It's good enough to do what you need though. Overall for my hobby it's a good deal, would get something better if I was making $$ on my projects!
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
May 15, 2009
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Height adjustment
The lift is made well my only problem is it drifts down from vibration. I placed a wedge under the router to solve the problem. The wedge has prevented drift and I have experience no problems since.
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
The patented thread tensioning design did...
The patented thread tensioning design did not work for me. However I only rotated the brass tensioning collar two grooves tighter not wanting to bend or break anything. Instead I added a lock nut to the threaded rod. This is no big deal as my router station is open at the front. I still give this unit 5 stars. It's very well built, inexpensive and beats out my old rig.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
January 2, 2012
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
