Makes damaged screw extraction quick and easy with your choice of Screw Extractors! Choose from 1/4", 5/16", and 3/8" bits that are designed to work like a reverse drill bit. Simply put the bit in your drill and use your drill in reverse to remove the stripped screw! Works like a charm on old, stripped screws, and soft screws that strip easily.
1/4" Diameter - can extract up to a #8 screw.
5/16" Diameter - can extract up to a #10 screw.
3/8" Diameter - can extract up to a #14 screw.
- Removes damaged or stripped screws quickly and easily
- Works with any power drill
- Choose the bit that best matches the size of your stripped screw
19 Review(s)View All
OutstandingPosted October 28, 2014
Worked flawlessly - good productPosted January 30, 2014
I used the extractor on two screws with broken heads burried in a cherry board (leg of a bed); each screw had about 1/2" of screw in the board.
I took my time making sure to get the screw as near as center as possible. I made sure to keep my drill in reverse. I made sure to back out the extractor every 1/8th of an inch or so and cleared the waste to check on my progress relative to the screws position.
Removing the screws worked easily for both with no broken bits. It did take me about 15 minutes to get the plug with screw out of the bit after the successful removal without chewing up my hand.
Good buy, highly recommend.
I used the 1/4 " size...Posted October 27, 2010