Search results forRouter Bits

  • Items 1 - 24 of 522
  • Page:
    1. 1
    2. 2
    3. 3
  • Rockler Straight, 2-Flute Router Bits - 1/4" Shank
    Rockler Straight, 2-Flute Router Bits - 1/4" Shank
    11 Review(s)

    From: $13.99

    One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life…

  • Freud® 97-200 3-Pc. Cabinet Router Bit Set
    Freud® 97-200 3-Pc. Cabinet Router Bit Set

    $179.99

    Ogee rail-and-stile bits and a Quadra-Cut™ bevel raised-panel bit all have 1/2" shanks and are designed for use on 3/4" stock. Bits cut all composite materials, plywoods, hardwoods and softwoods. For use on a table-mounted portable router. Rail-and-stile bits have an overall diameter of…

  • Rockler Complete Dovetail Jig
    Rockler Complete Dovetail Jig
    131 Review(s)

    $164.99

    …dovetail bit height for half-blind joints. Complete Dovetail Jig Includes: * Two durable phenolic templates* Three 8mm shank carbide-tipped router bits (1/2" x 14° dovetail, 1/2" x 8° dovetail, 5/16" straight)* 1/2" to 8mm collet adapter* 7/16" guide bushing fits most routers* Detailed…

  • Rockler Traditional Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank
    Rockler Traditional Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank
    4 Review(s)

    $99.99

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a…

  • Freud® Rabbeting Router Bits - 1/2" Shank
    Freud® Rabbeting Router Bits - 1/2" Shank

    From: $31.97

    …such as for letting in back panels and the tops and bottoms of cabinets. The bits feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

  • Freud® 99-520 Quadra-Cut™ Ogee Raised Panel Router Bit - 3-1/2" Dia x 5/8" H x 1/2" Shank
    Freud® 99-520 Quadra-Cut™ Ogee Raised Panel Router Bit - 3-1/2" Dia x 5/8" H x 1/2" Shank
    1 Review(s)

    $104.47

    …smooth finish, and two small wings that cut downward for an absolutely splinter- and fuzz-free edge, even on cross-grain cuts in difficult materials.* Use 5/8" height is ideal for 3/4" stock.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on table-mounted portable routers.

  • Freud® 3-Pc. Undersized Plywood Router Bit Set
    Freud® 3-Pc. Undersized Plywood Router Bit Set

    From: $51.47

    …protects bits from heat and pitch build up. Set comes in Freud's new case with bit mount to keep bits handy and safe. All bits have 1/4'' shanks. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on hand-held and table mounted portable routers. * These Freud bits are designed…

  • Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank
    Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    $79.99

    Often woodworkers make the mistake of using a router bit that is too small for table tops. This one is ideally proportioned at a full 2-1/2" wide overall, and offers a spacious profile with a simple ogee curve as pleasing to the eye as it is to the touch. Click the "Tech Specs" tab for specific…

  • Freud® 94-150 Door System Router Bit Set - 1/2" Shank
    Freud® 94-150 Door System Router Bit Set - 1/2" Shank

    $269.47

    …precise bits work for any door from 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and…

  • Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank
    Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    $21.99

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

  • Freud® 97-158 3-Pc. Door Router Bit Set - 1" H x 1/2" Shank
    Freud® 97-158 3-Pc. Door Router Bit Set - 1" H x 1/2" Shank
    1 Review(s)

    $195.97

    …These precise bits work for any door 5/8" to 1-1/4" thick. The unique cutter geometry virtually eliminates tearout. Adjustable shims let you adjust the panel groove from 7/32" to 1/4" thick, enabling a tight fit when using plywood. Also includes a 3-1/2" diameter Cove Raised Panel Bit with back…

  • Rockler Shutter Louver Router Bits - 1/2" Shank
    Rockler Shutter Louver Router Bits - 1/2" Shank
    0 Review(s)

    From: $41.99

    Use our Louver Router Bits to create your own shutter louvers in 2-1/2" or 3-1/2" widths. The louvers interface seamless with other elements of the Rockler Shutter System. The included ball-bearing guide runs along the middle of the shutter slat—just rout one side, then turn the slat around to…

  • Router Bit Set-Up Jigs for 92112 and 92123 Drawer Lock Bits
    Router Bit Set-Up Jigs for 92112 and 92123 Drawer Lock Bits
    1 Review(s)

    $7.69

    Set your router bit to the precise height every time for accurate lock miter joints! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit. Jig works for 3/4" stock on one side and 5/8" stock on the other. Made of durable HDPE and measures 2" x 3-7/8" x…

  • Rockler Straight Raised Panel Router Bit - 1-1/4" Dia x 1-5/8" H x 1/2" Shank
    Rockler Straight Raised Panel Router Bit - 1-1/4" Dia x 1-5/8" H x 1/2" Shank
    4 Review(s)

    $54.99

    Vertical panel raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor, and allowing you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router table. Precision machining paired with a sturdy…

  • Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/4" Shank
    Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    $21.99

    Top quality bits that meet the high demands of Rockler Woodworking and Hardware. Bit has two flutes and 5/8" ball bearing guide. Use to trim cabinet face frames flush with cabinet sides - decorative V-groove conceals the seam.

  • Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank
    Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank
    3 Review(s)

    $19.99

    This Dovetail Pattern Bit includes a guide bearing that offers silky smooth operation when used with templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. Perfect for drawers and jewelry boxes,…

  • Rockler Edge V-Groove Router Bits - 1/2" Shank
    Rockler Edge V-Groove Router Bits - 1/2" Shank
    1 Review(s)

    From: $39.99

    …with these interlocking V-Groove Bits, and you'll never have to worry about misaligned boards again. When it's time to clamp up an edge joint, the parts slide into perfect alignment without any twisting, prying or hammering. The deep channel created by the V-Groove Bit also increases the available…

  • Freud® Mortising Router Bits - 1/2" Shank
    Freud® Mortising Router Bits - 1/2" Shank
    2 Review(s)

    From: $18.47

    …joinery applications like mortises, and dadoes.* Designed with deep center gullets for maximum material removal without chip loading.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

  • Rockler Dish Carving Router Bit - 1-1/4" Dia x 1/2" H x 1/2" Shank
    Rockler Dish Carving Router Bit - 1-1/4" Dia x 1/2" H x 1/2" Shank

    $42.99

    The integral guide bearing on this Dish Carving Bit makes it easy to creat custom bowls and trays in any shape you can cut a template for. Features a carbide tip that's been final sharpened with an 800 grit diamond wheel for smooth cutting. Use it to remove large amounts of wood with minimal effort.…

  • Rockler Bevel Router Bit - 1/4" Shank
    Rockler Bevel Router Bit - 1/4" Shank

    $19.99

    When used as a laminate trimming bit, the bevel cleans up any excess adhesive, and also knocks down any sharp edges or slivers that remain. The bits feature 1/2" ball bearing guides to prevent any burning on the edge of your workpiece. 1/4" shanks.

  • Freud® Round Nose Router Bits - 1/2" Shank
    Freud® Round Nose Router Bits - 1/2" Shank
    2 Review(s)
    $34.97
    From: $24.79

    SAVE 29%

    Freud's Round Nose Router Bits can be used for fluted millwork, signs and decorative veining, as well as for practical features such as finger pulls and drain rails for cutting boards.* Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wooden…

  • Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank
    Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    From: $22.97

    …on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and precision-ground…

  • Rockler Piloted Flush Trim Router Bits - 1/4" Shank
    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    From: $15.99

    …the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two…

  • Freud® Top and Bottom Bearing Flush Trim Router Bits
    Freud® Top and Bottom Bearing Flush Trim Router Bits

    From: $34.47

    …for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects. Cuts all hardwoods, softwoods, plastic laminates and veneered plywood. Use on hand-held routers, laminate trimmers, and table-mounted portable routers.

  • Items 1 - 24 of 522
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X