Search results forCnc Router Bits

  1. Freud # 90-160 5-Piece Down-Spiral Solid Carbide Router Bit Set

    Freud # 90-160 5-Piece Down-Spiral Solid Carbide Router Bit Set

    …or mount on the bench to keep bits handy and safe.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and tablemounted portable routers.* Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.*…

    $159.97
  2. CMT Bowl & Tray System Kit

    CMT Bowl & Tray System Kit

    …templates are produced on a CNC router, ensuring perfect curves and straight lines).* Oval template produces 14" wide x 22-1/2" long tray.* Pie-cut template produces 16-3/4" round tray.* 3-1/2" long collet extension accepts 1/2" shank router bits.* Bowl and Tray router bit: 1-1/4" diameter; carbide…

    3 Review(s)
    $112.99
  3. Freud Cove and Bead Groove Bits

    Freud Cove and Bead Groove Bits

    This bit can be used to create ornamental edge profiles and decorative grooves in molding and furniture. For edge profiles, use it with an edge guide or router table. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and…

    $38.47
  4. Rockler Pro Phenolic Router Table, Fence, Plate & Stand

    Rockler Pro Phenolic Router Table, Fence, Plate & Stand

    …1/4" Aluminum Router Plates Predrilled for Most Routers: To choose an aluminum plate, find your router in one of the four groups below. If your router is not listed, choose either the Standard Blank Plate (with a 3-1/4'' bit opening) or the Large Blank Plate (with a 3-11/16'' bit opening) and drill…

    $499.99
  5. Freud # 70-104 Key Hole Bit, 25/64'' Dia. x 7/16''H, 1/4'' Shank

    Freud # 70-104 Key Hole Bit, 25/64'' Dia. x 7/16''H, 1/4'' Shank

    …Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD® Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced…

    $18.97
  6. Click-N-Carve CNC Carving Machine BE2015

    Click-N-Carve CNC Carving Machine BE2015

    For those looking for plug-and-play simplicity in a CNC router, look no further than the Click-N-Carve BE2015. Affordable, accessible and intuitive, the Click-N-Carve is the very definition of easy-to-use: simply load your photo, close the lid, and with only a few clicks, the BE2015 will be quietly…

    3 Review(s)
    $1599.99
  7. CNC Shark Pro Plus

    CNC Shark Pro Plus

    …fully compatible with the Bosch Colt Palm Router and includes a 3/8" diameter V-groove router bit. The CNC Shark also includes VCarve Pro 7 and Cut3D design software a $900 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the USB…

    $3799.99 $3699.99
  8. Freud Lock Miter Bits

    Freud Lock Miter Bits

    …* Run one board vertically and the piece to be joined horizontally. * 99-035 cuts thinner panels for projects such as humidors and jewelry boxes. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers, as well as table-mounted portable routers.

    2 Review(s)
    $108.97
  9. Freud 84-126 Triple Fluting Bit

    Freud 84-126 Triple Fluting Bit

    …1/2" shank ensures a steady cut with minimal vibration, while the solid carbide cutting edges promise a long life with minimal burning. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    $56.97
  10. Freud Down-Spiral Router Bits

    Freud Down-Spiral Router Bits

    …and laminates. * Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    3 Review(s)
    From: $50.97
  11. 1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits

    1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits

    …Click-N-Carve CNC Router Bits with the larger CNC Shark line of routers, as well as any other CNC router or handheld router with a 1/4" collet. It reduces the collet opening from 1/4" to 4mm to accept the smaller Click-N-Carve shank. The Click-N-Carve selection offers many unique router bits,

    $6.99
  12. Freud Crown Molding Bits

    Freud Crown Molding Bits

    …moldings * Customize your decorative crown moldings to add elegance to any room. * Simply adjust the height of your cut to change the entire profile. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers and table-mounted portable routers.

    2 Review(s)
    $68.97
  13. CNC Shark Pro Plus Routing System - Limited Quantities

    CNC Shark Pro Plus Routing System - Limited Quantities

    …compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes version 7.0 of the VCarve Pro software interface - a $600 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the…

    15 Review(s)
    $3799.99 $3499.99
  14. Freud® Dovetail Router Bits

    Freud® Dovetail Router Bits

    bits for drawer stock, and the 13/16"H dovetail bits for 3/4" thick carcases. Cut all composition materials, plywoods, hardwoods and softwoods. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life…

    From: $17.47
  15. Freud Top Bearing Mortising Dado Router Bits

    Freud Top Bearing Mortising Dado Router Bits

    …Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD® Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced…

    From: $22.47
  16. Freud # 52-522 T-Slotting Cutter Bit, 1-1/8'' Dia. x 13/16'' H x 1/2'' Sh.

    Freud # 52-522 T-Slotting Cutter Bit, 1-1/8'' Dia. x 13/16'' H x 1/2'' Sh.

    Build your own sturdy, attractive, slotted wall to display items from garden tools and power tools to toys — hanging by a hook. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    $48.47
  17. Freud # 18-108 Round Nose Bits, 1/2'' Dia. x 3/8'' H x 1/4'' Sh.

    Freud # 18-108 Round Nose Bits, 1/2'' Dia. x 3/8'' H x 1/4'' Sh.

    …veining. * Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wood signs. * Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    $25.97
  18. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    …included (over $900 value).* Includes 3/8" Diameter V-Groove Router Bit* Includes two Hold-down Clamps* Includes mounts for a Bosch Router (Router Motor is not included, sold separately) * Fully compatible with the Bosch Colt Palm Router* Free downloadable control program included* Download free…

    20 Review(s)
    $2899.99
  19. Freud # 64-100 Solid Carbide Flush Trim Bit, 1/4'' Dia. x 3/8''H, 1/4'' Shank

    Freud # 64-100 Solid Carbide Flush Trim Bit, 1/4'' Dia. x 3/8''H, 1/4'' Shank

    …Use on CNC and other automatic routers as well as hand-held and tablemounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD™ Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced…

    $9.47
  20. Freud # 99-035 Lock Miter Bits, 2-11/64'' Dia. x 7/8'' H x 1/2'' Sh.

    Freud # 99-035 Lock Miter Bits, 2-11/64'' Dia. x 7/8'' H x 1/2'' Sh.

    …joints.Run one board vertically and the piece to be joined horizontally.99-035 cuts thinner panels for projects such as humidors and jewelry boxes.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers, as well as table-mounted portable routers.

    $95.97
  21. Ready2Rout Router Table Fence

    Ready2Rout Router Table Fence

    …the diameter of your bit and the width of your workpiece and the system automatically positions the fence for the cuts.* Touch screen can be used to indicate the router bit width, and to convert to metric decimals or fractions. For example, you can use a 1/4-inch bit to rout a 12mm dado without…

    2 Review(s)
    $599.99
  22. 4212 Porter-Cable  12'' Dovetail Jig

    4212 Porter-Cable 12'' Dovetail Jig

    …and box template, dovetail bit, straight bit, two template guides, two lock nuts and T-handle hex wrench.* Heavy-duty cam-type clamps with sandpaper-backed locking bars provide solid grip of wood.* CNC machined aluminum templates provide superior accuracy.* For use with routers with 1/2 collet.

    $187.99
  23. Rockler Router Table Plates

    Rockler Router Table Plates

    …C and D use Large Opening inserts.* CNC machining for a dead-flat routing surface where it counts the most – right next to the bit.* Each heavy-duty aluminum router plate includes an insert with a 1-1/2" bit opening, plate locking bolts and router mounting hardware.* Please note: Because…

    8 Review(s)
    $59.99
  24. Freud Base Cap Bits

    Freud Base Cap Bits

    …base moldings in older homes. The bits can be used to rout base cap only, or to profile the edge of wide base molding. The wood species is up to you—use with hardwood or softwood to mill stain grade molding. Use with table mounted, CNC or automatic routers.* Note: For best results make two or…

    1 Review(s)
    $67.47
Feedback X