Search results for10 Drawer Slides

Product not found, but we found these articles.
  1. Making a Table Saw Adjustable Tenoning Jig / Rockler How-to

    Making a Table Saw Adjustable Tenoning Jig / Rockler How-to

    slides back and forth across the base on a pair of beveled guides, and the lateral travel is simple to fine-tune with a carriage bolt and knob in back. A toggle clamp and backstop anchors the workpiece. To save the backstop from blade carnage, I've added a replaceable strip that fits onto a sliding

  2. Screw Comparison Guide / Rockler How-to

    Screw Comparison Guide / Rockler How-to

    …Thread: Deep Thread Size: #6, #8, #10 Trim Head Square Drive Application: Trim Molding. Finish nail look with the power of a screw. Head: Small 3/16" Trim Head Thread: Deep Thread Size: #6 Slide Mounting Screws Application: Ball bearing slides and catches, drawer slides, shelf supports. Low profile…

  3. Workshop Benchtop Planer Cart Project / Rockler How-to

    Workshop Benchtop Planer Cart Project / Rockler How-to

    …full-extension drawer slides (pieces 16). But first, grab a length of rope or a ratcheting tiedown to hold the wings closed before inverting the cart. Detach the drawer side section of the slides and fasten them to the outfeed table cleats so the edges are flush, then reattach the slides to the…

  4. Wixey Saw Fence Digital Readout Attaches to Table Saw Fence for Sensor Readings / Rockler How-to

    Wixey Saw Fence Digital Readout Attaches to Table Saw Fence for Sensor Readings / Rockler How-to

    …rail. Metallic sensor strips adhere to the face of this rail to feed information about the rip fence's position to the digital display. The LCD unit slides along the sensor rail and attaches with a magnet to a bracket you mount on the rip fence handle housing. So, once the unit is installed, you can…

  5. Rockler's Table Saw Crosscut Sled with MDF and Aluminum Fences / Rockler How-to

    Rockler's Table Saw Crosscut Sled with MDF and Aluminum Fences / Rockler How-to

    …Woodworker's Journal Rockler's Crosscut sled is easy to use and modify, helping you make mistake free and safe cuts. Rockler's Table Saw Crosscut Sled slides across your table saw to help you make splinter-free cuts. The 23-3â 4" x 23-3â 4" table has a 3" H x 24" L aluminum fence with adjustable…

  6. Makita Adds LXSL01 Miter Saw That Requires Less Maintenance with the Same Power / Rockler How-to

    Makita Adds LXSL01 Miter Saw That Requires Less Maintenance with the Same Power / Rockler How-to

    …post next post Related Products * Jet® 10'' Sliding Dual-Bevel Compound Miter Saw $554.99 View Product * DeWalt DW715 Heavy-Duty 12'' (305mm) Single-Bevel Compound Miter Saw $345.99 View Product * DeWALT DW717 Heavy-Duty 10'' (254mm) Double-Bevel Sliding Compound Miter Saw $556.99 View Product *…

  7. How to Mark a Multi-sleeve Rolling Pin with a Box Router Jig Instead of a Lathe / Rockler How-to

    How to Mark a Multi-sleeve Rolling Pin with a Box Router Jig Instead of a Lathe / Rockler How-to

    …in PDF format, click here. Building the Router Slide Set up the router slide on the top of the jig, stable but able to slide, guided by fixed and spring-loaded fences. The router slides across the top of the jig box on a custom base. It needs to slide easily but be snug enough to not shift, spoiling…

  8. Rockler - comment page 1

    Rockler - comment page 1

    …Related Products: Dresser Drawer Slides * Using the Rockler Custom Door and Drawer Front Program / Rockler How-to Using the Rockler Custom Door and Drawer Front Program / Rockler How-to …Hinges Comments 3 thoughts on “Using the Rockler Custom Door and Drawer Front Program” * susan…

  9. Bosch GCM12SD 12" Dual-Bevel Glide Miter Saw Adds New Articulating Arm / Rockler How-to

    Bosch GCM12SD 12" Dual-Bevel Glide Miter Saw Adds New Articulating Arm / Rockler How-to

    …post next post Related Products * Jet® 10'' Sliding Dual-Bevel Compound Miter Saw $554.99 View Product * DeWalt DW715 Heavy-Duty 12'' (305mm) Single-Bevel Compound Miter Saw $345.99 View Product * DeWALT DW717 Heavy-Duty 10'' (254mm) Double-Bevel Sliding Compound Miter Saw $556.99 View Product *…

  10. Osborne Wood Products Furniture Leg in Mahogany, Maple Woods and More / Rockler How-to

    Osborne Wood Products Furniture Leg in Mahogany, Maple Woods and More / Rockler How-to

    …Products is manufacturing a new 5"-diameter island leg called the Massive Savannah Leg (model #1496). The 1496 is 341â 2" long and is available in 10 wood types: alder, cherry, hard maple, hickory, mahogany, pine, red oak, red birch, soft maple and walnut. 2008 prices per leg vary by wood type,…

  11. Let There Be Light (and Level) / Rockler How-to

    Let There Be Light (and Level) / Rockler How-to

    …plastic housing and features three magnets on its back side for convenient storage The UFO is great for screwing in the back-end screws of drawer slides, installing closet hardware, or just random driving and drilling in a dusky recess of your basement. Portable to the extreme, the UFO fits…

  12. Cutting a Bigger, Better Ellipse / Rockler How-to

    Cutting a Bigger, Better Ellipse / Rockler How-to

    …An ellipse jig (sometimes called a double trammel jig) isn’t new technology by any means. It’s essentially a big compass that uses two sliding pivot points to guide a router along the perimeter of the ellipse. You’ll find plans for constructing, and tips on using this time-honored…

  13. Wall-mounted Plywood Panel Press Project / Rockler How-to

    Wall-mounted Plywood Panel Press Project / Rockler How-to

    …screw the platens to the brackets. Slide the press bars onto the carriage bolts and secure them in place with washers and the star knobs. Next, slide the press bars onto the carriage bolts; they should move freely along the bolts. If necessary, improve the sliding action by carefully bending the…

  14. Wall-mounted Plywood Panel Press Project / Rockler How-to

    Wall-mounted Plywood Panel Press Project / Rockler How-to

    …screw the platens to the brackets. Slide the press bars onto the carriage bolts and secure them in place with washers and the star knobs. Next, slide the press bars onto the carriage bolts; they should move freely along the bolts. If necessary, improve the sliding action by carefully bending the…

  15. Impact Driver Review: 2009's Top Six Driver Tools Reviewed / Rockler How-to

    Impact Driver Review: 2009's Top Six Driver Tools Reviewed / Rockler How-to

    …My "real world" test for finesse was driving 1/2"-long screws through drawer slides and into a piece of plywood, just like you'd do when installing hardware on a project. The last time I "installed" this many drawer slides I was building cabinets and displays for large retail stores. I found that,…

  16. Set Up Shop Fast With Rockler's Steel Shop Stands / Rockler How-to

    Set Up Shop Fast With Rockler's Steel Shop Stands / Rockler How-to

    …sides, shelves and doors, and stretchers feature flanged top edges to support a top or shelf. With the available Drawer Kits, you can easily mount epoxy-coated or ball-bearing drawer slides to 18" and 24" deep stands. The included levelers provide a solid base, even on rough floors, but also can…

  17. The Advantages of Delta and Jet Tools 12 Inch Jointer and Planer Combination Tables / Rockler How-to

    The Advantages of Delta and Jet Tools 12 Inch Jointer and Planer Combination Tables / Rockler How-to

    …when it comes to jointer/planer combination machines. The Perfect Marriage Both planer/jointer combos feature a cutter guard mounted on an arm that slides back and forth to cover the exposed cutters depending on your settings. Leaving aside for the moment all the other considerations involved in the…

  18. How to Choose Between a Single-Bevel or Dual-Bevel Miter Saw for Your Shop / Rockler How-to

    How to Choose Between a Single-Bevel or Dual-Bevel Miter Saw for Your Shop / Rockler How-to

    …post next post Related Products * Jet® 10'' Sliding Dual-Bevel Compound Miter Saw $554.99 View Product * DeWalt DW715 Heavy-Duty 12'' (305mm) Single-Bevel Compound Miter Saw $345.99 View Product * DeWALT DW717 Heavy-Duty 10'' (254mm) Double-Bevel Sliding Compound Miter Saw $556.99 View Product *…

  19. SawStop, Delta Tools and Powermatic Earn Chris Marshall's Picks as Top Cabinet Saws / Rockler How-to

    SawStop, Delta Tools and Powermatic Earn Chris Marshall's Picks as Top Cabinet Saws / Rockler How-to

    …changes over the past few years with improved safety features, like this SawStop's patented technologies. It's been seven years since we last reviewed 10" cabinet saws, so when editor in chief Rob Johnstone suggested we put them under the microscope again, I jumped at the chance. That's because so…

  20. How to Make PVC Pipe Chisel and Lathe Tool Storage Panel / Rockler How-to

    How to Make PVC Pipe Chisel and Lathe Tool Storage Panel / Rockler How-to

    …This tip-out tool holder can bring that convenience to most open-stand lathes. It converts unused space between the legs into practical storage for 10 tools. PVC tubing holds each tool stationary and prevents the cutting edges from contacting one another. The holder is made to fit our Delta 1440…

  21. Build a Folding Outfeed Table to Mount on Your Table Saw Stand / Rockler How-to

    Build a Folding Outfeed Table to Mount on Your Table Saw Stand / Rockler How-to

    …spacer to the table and the barrel bolt to the build-up strip. Slide the bolt over against the leg brace, and give it a good rap with a hammer to mark the bolt's location. Drill a 1/2"-diameter, 1"-deep hole here to allow the bolt to slide fully into the leg and secure it. Mounting the Table to the…

  22. How to Build a Waney-edged Box / Rockler How-to

    How to Build a Waney-edged Box / Rockler How-to

    …clear the drawer supports). These blocks and the pull form three legs upon which the drawer sits when it is removed. Here's a fine opportunity to give the whole box and the drawer a good sanding, taking it up through the grits. Adding the Top Now you are ready to make the top (piece 10). As I stated…

  23. Fluted Beams LLC Cold-Bend Hardwood Lumber Themo-Mechanical Hardwoods / Rockler How-to

    Fluted Beams LLC Cold-Bend Hardwood Lumber Themo-Mechanical Hardwoods / Rockler How-to

    …thickness up to one-fifth of the board radius (in other words, a 1" board can be bent around a 5" radius circle). It's real hardwood, too, available in 10 domestic species. No chemicals or glues are used in this process, and the Cold-Bend lumber, which comes in thicknesses up to 1-3â 4", looks the…

  24. The Best in Jig Making Materials / Rockler How-to

    The Best in Jig Making Materials / Rockler How-to

    …a quick tour of a few of our most popular jig-making supplies. Jigs that slide are among the most common of all shop-made gadgets. In fact, it would be safe to guess that about half of all woodworking jigs are designed to slide in a standard 3/4" x 3/8" miter track. Historically, that's meant sawing…

Feedback X