Search results forRouter

  1. Rabbeting Router Bit

    Rabbeting Router Bit

    This carbide rabbeting bit includes bearings for 5/16", 3/8", 7/16" and 1/2" deep rabbets. You can vary the cutting depth by changing bearings with the included hex wrench. Perfect for joinery applications such as for setting in cabinet backs. Sturdy 1/2" shank.

    15 Review(s)
    $39.99 $27.99

    SAVE 30%

  2. Dewalt DWS5031 TrackSaw Router Adapter

    Dewalt DWS5031 TrackSaw Router Adapter

    TrackSaw Router Adapter * 3 Year Limited Warranty Features & Benefits: * Allows most routers to be used with TrackSaw tracks for perfectly straight routing along any line* Includes adapters for use with DEWALT and PORTER-CABLE fixed base and plunge routers

  3. 17-Piece Universal T-Track Kit

    17-Piece Universal T-Track Kit

    Universal T-Track boasts a unique stacked-slot design that allows you to attach any accessory with 1/4" T-bolts, 5/16" T-bolts, or 1/4" Hex-bolts. With this full-service kit you get: * One 4' length of Universal T-Track* Two 3-1/2" x 5/16" T-bolts* Two 1" x 5/16" T-bolts* Two 1-1/2" x 5/16" T-bolts*…

    45 Review(s)
  4. Back Cutter Router Bit

    Back Cutter Router Bit

    This relief cutter provides a safe, economical way to fit flat and raised panels into the 1/4" groove of cope and stick frames. For flat panels, making a relief cut means you don't have to plane your panels down to 1/4", meaning less wasted wood, less wear and tear, and a far more stable panel. The…

    0 Review(s)
  5. Replacement Single-Speed Motor for Porter Cable 450 and 450PK Compact Routers

    Replacement Single-Speed Motor for Porter Cable 450 and 450PK Compact Routers

    Replacement Single-Speed Motor for Porter Cable 450 and 450PK Compact Routers (#41766 and #41462).

  6. iGaging DigiMAG Magnetic Digital Router Lift Remote Readout

    iGaging DigiMAG Magnetic Digital Router Lift Remote Readout

    Keep close tabs on the position of your router lift with this clever remote gauge.Accommodates vertical or horizontal setup. Positional measurements from 0 to 6"read out on a large LCD display in standard, metric and fractional inch modes. Displayis connected to the gauge by a 4' wire and features a…

    6 Review(s)
  7. PG2000 Router Bit Bearing Lube Pen

    PG2000 Router Bit Bearing Lube Pen

    Apply lubrication to router bit bearings, table saw trunnions, drill press gears and more with pin-point accuracy. Provides long lasting, smooth operation of any metal-to-metal mechanism. Lubricant also penetrates and cleans moving parts.

    2 Review(s)
  8. Safety Power Tool Switch

    Safety Power Tool Switch

    …find when you're in a tight spot. Locate it near your hip or knee and you'll never have to take your hands off the workpiece. Great for use with router tables or any workbench where you use a stationary power tool. * Includes 7' grounded cord to outlet and 2' female cord to power tool for quick…

    140 Review(s)
  9. Kreg® Precision Setup Bars

    Kreg® Precision Setup Bars

    …each pass* Seven set-up bars: 1/8" (.125), 3/16" (.188), 1/4"(.250), 5/16" (.313), 3/8" (.375), 7/16" (.438), 1/2" (.500)* Each individual bar is made from soft aluminum designed to prevent damage to your router bit or saw blade in case they make contact during setup* Durable plastic storage case

    3 Review(s)
  10. Rockler Complete Dovetail Jig

    Rockler Complete Dovetail Jig

    …Jig Includes: * Two durable phenolic templates* Three 8mm shank carbide-tipped router bits (1/2" x 14° dovetail, 1/2" x 8° dovetail, 5/16" straight)* 1/2" to 8mm collet adapter* 7/16" guide bushing fits most routers* Detailed eight-page instruction booklet* Quick reference guide for standard…

    131 Review(s)
    $164.99 $139.99

    SAVE 15%

  11. Freud Top and Bottom Bearing Flush Trim Router Bits

    Freud Top and Bottom Bearing Flush Trim Router Bits

    …for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects. Cuts all hardwoods, softwoods, plastic laminates and veneered plywood. Use on hand-held routers, laminate trimmers, and table-mounted portable routers.

    From: $34.47
  12. Piloted Flush Trim Bit

    Piloted Flush Trim Bit

    Piloted Flush Trim Bit

  13. Routers and Router Tables (Book)

    Routers and Router Tables (Book)

    …One - Routers and Bits * How Many Routers Does Your Shop Need? * Trim Routers * Heavy-Duty Plunge Routers* Ten Essential Router Bits * Upgrade Your Router with Shop-Built BasesPart Two - Router Tables * Router-Table Basics * A Versatile Router Table* Space-Saving Router Table * Rock-Solid Router

  14. Router Table Shim

    Router Table Shim

    Necessary accessory for mounting a Phenolic Router Table Top to the Rockler Steel Router Table Cabinet (41427, sold separately).

  15. Router Speed Control

    Router Speed Control

    New router speed control allows for a wide range in speeds to match your application.* Get the appropriate speed to match the router bit and application without investing in an expensive variable speed router!* Set the rate from 0 RPM to full speed.* Use on brush-type motor routers up to 3 HP, 20…

    17 Review(s)
  16. Small Router Bit Case

    Small Router Bit Case

    Solid wood cases firmly hold 1/4" and 1/2" shanked router bits for easy carrying and convenient storage. Small router bit case is ideal for storing different categories of bits, including straight, roundover, raised panel door and specialty bits. With rubber feet on bottom for standing. Holds 20…

    4 Review(s)
  17. Replacement Inlay Router Bit

    Replacement Inlay Router Bit

    Replacement Router Bit for the Rockler Inlay System (25229, sold separately) and the Inlay Bushing and Bit (27593, sold separately).

  18. Festool CMS-GE Router Table

    Festool CMS-GE Router Table

    …cutter diameter (OF 1010 Router): 2" (51mm)* Maximum cutter diameter (OF 1400 Router): 2-11/32" (60mm)* Diameter of dust extraction port for fence: 36mm* Diameter of dust extraction port for router: 27mm Features:* Compatible with OF 1010 and OF 1400 routers (sold separately).* Fences…

  19. Miniature Classic Router Bit

    Miniature Classic Router Bit

    …cutting decorative flutes or routing letters on signs. With its wave-shaped profile, you'll get a more ornate look than with typical router bits. Alternatively, the bit can be used in the router table to apply an ogee-like edge to table tops and other parts. Scaled specifically for smaller projects.

  20. Router Xtreme Xtension™

    Router Xtreme Xtension™

    …to raise above tabletop.* For use with variable-speed plunge router in table application.* Comes with 5/32" Allen wrench and locking screw.* Fatigue-proof steel. Please Note: Cannot be used with fixed base single speed or handheld router operations without significant modification of router base.

    5 Review(s)
  21. Router Guide Bushing Kit

    Router Guide Bushing Kit

    …Bushing Router Plate (sold separately). Affordably priced and designed with maximum utility in mind, this router plate features a 1-1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple patterns to allow attachment to most popular routers. Six…

    45 Review(s)
  22. Large Router Bit Case

    Large Router Bit Case

    The large solid wood case firmly holds 50 1/4" shank and 50 1/2" shanked router bits for easy carrying and convenient storage. High density foam ensures bits won't rattle traveling from job site to job site. The Large Router bit Case measures 7/8'' L x 13-1/8'' W x 4-1/8'' D.

    8 Review(s)
  23. Router Bit Tray

    Router Bit Tray

    Organize and store up to fifty router bits in this quality tray for drawers, shop made cases or use as a replacement tray for our Small Router Bit Case (sold separately, sku: 60588). * Twenty holes for 1/4" shank bits* Thirty holes for 1/2" shank bits* 6" x 12" x 1-1/2"* Made of hard foam

    3 Review(s)
  24. Router Table Dust Port

    Router Table Dust Port

    …Dog Router Table clean and dust free with this Router Table Dust Port! Quickly and easily connects to your table using T-knobs (not included). The 2-1/2" OD (2-1/4" ID) port connects to your shop vac or dust collection system. Technical Details* Compatible with Rockler or Bench Dog Router Tables*…

Feedback X