Search results forfeed

  1. Plastic Wire Bushings

    Plastic Wire Bushings

    Mount these bushings after drilling through drywall to feed low-voltage cables and wires through the wall smoothly for a simple and organized look. Bushings finish cut drywall edges and prevent crumbling when cables are pulled through or adjusted. Available in three sizes, as listed. Important…

    From: $1.59
  2. Jet® Drum Sander 1.75HP w/Open Stand

    Jet® Drum Sander 1.75HP w/Open Stand

    …heat-damage* Sealed and permanently lubricated drum ball bearings for longer life* Precision-fl attened reinforced steel conveyor bed and no-give power feed belt provide a fl at sanding surface for better results* Adjustable drum height and downward pressure feature virtually eliminates snipe* Large…

    4 Review(s)
    $1784.99
  3. Jet® 15'' Planer w/Helical Head

    Jet® 15'' Planer w/Helical Head

    …tensioner lets you adjust the feed rate to meet your needs* Large, cast iron, precision ground table for precise workpiece support* Powerful 3 HP TEFC induction motor with three V-belt transmission for smooth and consistent power* Two-speed gear box lets you adjust the feed rate to meet your needs*…

    $2754.99
  4. Powermatic® 20'' Planer 5HP 1PH

    Powermatic® 20'' Planer 5HP 1PH

    …gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and…

    $2854.99
  5. Powermatic® 20'' Planer 5HP 3PH

    Powermatic® 20'' Planer 5HP 3PH

    …gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and…

    $2839.99
  6. Jet® 15'' Planer w/Quick-Change Knives

    Jet® 15'' Planer w/Quick-Change Knives

    …little cash and a lot of frustration. This sweet machine features a monster 3-horsepower induction motor with two speed gear box to adjust your feed rate for a better finished surface. Its rock-solid table is constructed of cast iron and features infeed and outfeed table extensions with…

    $1989.99
  7. 10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    …II is a top-quality general purpose blade. This thin kerf version of the WWII is perfect for table saws under 3HP. Specifications: * 40 tooth * 3/32" Kerf * Teeth have 15 Degree alternating tooth bevel * 20 degree face hook for easy feed * Carbide tipped * 5/8" Arbor * Produces smooth as sanded cuts

    19 Review(s)
    $114.99
  8. Rockler T-Slotwall Cutter Bit

    Rockler T-Slotwall Cutter Bit

    …Note: Not intended to create T-slots for jigs. If that is your goal, use bit 26099.* Carbide-tipped bit cuts 5/16" x 1-1/16" slot with 3/8" groove.* Works best with MDF and soft woods.* When working with hardwood, this bit requires a much lower rate of feed to eliminate burning and breakage.

    7 Review(s)
    $34.99
  9. Magswitch Pro Fence Featherboard

    Magswitch Pro Fence Featherboard

    …holding wood down on any steel woodworking table tool fence. Features two on/off Magswitches with 150lb/67kg holding force each. Use for right side feed on Table Saw or Band Saw blade. Low profile. Precise easy tensioning. Technical Details:* Ideal for Fences - instant on/off magnetic featherboard.*…

    1 Review(s)
    $68.99
  10. Jet® 13'' Planer/Molder with Closed Stand

    Jet® 13'' Planer/Molder with Closed Stand

    …Thickness: 6-1/8"* Minimum Planing Length: 14"* Cutterhead Speed: 4500 RPM* Cutterhead Diameter: 2-9/16"* Cuts Per Minute: 13500* Feed Rate - Planing: 20 FPM* Feed Rate - Molding: 10 FPM* Number of Knives: 3* Dust Port Diameter: 4"* Motor Power: 1-1/2 HP* Motor Voltage: 115/230 V* Prewired Voltage:…

    1 Review(s)
    $1119.99
  11. Jet® 16'' Planer w/Open Stand

    Jet® 16'' Planer w/Open Stand

    …iron and steel construction keeps the workpiece steady and supported, while the conveniently located two-speed gear box allows for quick and easy feed rate adjustments. This machine means business with a powerful 3 HP induction motor. A large cast-iron table with smooth-as-glass surface makes this…

    $1529.99
  12. Tormek T-7 Sharpening System

    Tormek T-7 Sharpening System

    …which uses a diamond cutter to return worn, out-of-round wheels to like-new condition. Precision screw feed allows you to grade the wheel for a fine or coarse grade by simply varying the rate of feed. Plus, the standard system now includes the SP-650 Stone Grader. Simply press it onto the wheel to…

    8 Review(s)
    $639.00
  13. Tormek® Sharpening System with Handtool Kit

    Tormek® Sharpening System with Handtool Kit

    …which uses a diamond cutter to return worn, out-of-round wheels to like-new condition. Precision screw feed allows you to grade the wheel for a fine or coarse grade by simply varying the rate of feed. Plus, the standard system now includes the SP-650 Stone Grader. Simply press it onto the wheel to…

    $805.00
  14. Undersized Router Bits-1/4 Inch  Shank

    Undersized Router Bits-1/4 Inch Shank

    …used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which requires a flat, finished bottom. The two-flute cutters give a smooth finish with a medium feed rate. Two flutes, 1/4" shank.

    21 Review(s)
    From: $13.99
  15. Undersized Router Bits-1/2 Inch  Shank

    Undersized Router Bits-1/2 Inch Shank

    …used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which requires a flat, finished bottom. The two-flute cutters give a smooth finish with a medium feed rate. Two flutes, 1/2" shank.

    21 Review(s)
    $20.99 From: $13.99

    SAVE 33%

  16. Large Refill Kit for 3M™ PPS EZ-Clean System™, 60 Pieces

    Large Refill Kit for 3M™ PPS EZ-Clean System™, 60 Pieces

    …spotless. For a smaller quantity of liners and lids, see 26319. Technical Details:* Use this refill kit for the Large Starter Kit 20109 or Pressure Feed Starter Kit 26601.* Liners hold 28 oz. of finish. Simply remove the liner to clean your paint cup.* Lids feature integral filters, which strain the…

    $95.99
  17. Freud 1/8'' x 5/8'' Single Flute Straight Router Bit

    Freud 1/8'' x 5/8'' Single Flute Straight Router Bit

    This solid carbide single-flute bit was designed for maximum chip clearance — ideal for fast feed rates in a production environment. A relief in the end of the bit allows for fast plunging without bogging down. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and…

    0 Review(s)
    $12.47
  18. Jet® Drum Sander 1.75HP w/Closed Stand & Casters

    Jet® Drum Sander 1.75HP w/Closed Stand & Casters

    …damage.* Sealed and permanently lubricated drum ball bearings for longer life.* Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results.* Adjustable drum height and downward pressure feature virtually eliminate snipe.* 1700 RPM…

    3 Review(s)
    $1939.99
  19. i-socket 110m Tool and Vacuum Switch

    i-socket 110m Tool and Vacuum Switch

    …planers. Easy to install - just plug it in! Can be used with any standard 15 amp/125 volt wet/dry vacuum or dust collector system (max 1.0 HP) or power feed unit. Control two tools at the same time! Now you don't have to remember to power the vacuum on and off during every cut - the i-socket does it…

    68 Review(s)
    $39.99
  20. Dewalt DW7440RS Heavy-Duty Rolling Table Saw Stand

    Dewalt DW7440RS Heavy-Duty Rolling Table Saw Stand

    …to saw for easy detachment from stand for loading and unloading* Wide stand base and offset rear legs provide stability and support for material feed control* Retractable soft grip handle slides out allowing the user to pull the saw behind him comfortably with weight near the ground Features &…

    $169.00
  21. Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100 With FREE $15 Gift Card

    Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100 With FREE $15 Gift Card

    The GRR-Ripper is a precision, guidance, and 3D Push Block System designed to feed wood on a table saw safer than you can with your hands alone and more accurate and more precise than with conventional push blocks. The results will be better projects with less waste and fingers intact. With its…

    $59.99
  22. Freud® LU71M Industrial High-Production General Purpose Saw Blades

    Freud® LU71M Industrial High-Production General Purpose Saw Blades

    …general purpose blade is ideal for a production environment. With its low number of teeth and steep hook angle, this blade can operate at high feed rates. These features also make it the blade of choice when crosscutting extremely thick stock. Use it with dimensioned stock where speed is more…

    From: $96.47
  23. Jet® 20'' 3HP Planer

    Jet® 20'' 3HP Planer

    …iron and steel construction keeps the workpiece steady and supported, while the conveniently located two-speed gear box allows for quick and easy feed rate adjustments. This machine means business with a powerful 3 HP induction motor. You'll appreciate the sets of three steel infeed and outfeed…

    1 Review(s)
    $2345.99
  24. Bill Hylton's Ultimate Guide to the Router Table, Book

    Bill Hylton's Ultimate Guide to the Router Table, Book

    …the best router table for your shop (with enclosed plans)* * Accurately checking and adjusting your basic tabletop setup, bench, bits, fence and feed direction* * Making perfect cuts for joinery and profile cuts* * Staging cuts, dealing with dust, working small parts with templates* * Building and…

    1 Review(s)
    $24.99
Feedback X