Search results for'Banding'

  • Items 1 - 24 of 298
  • Page:
    1. 1
    2. 2
    3. 3
  • Peel-and-Stick Edge Banding   25' Rolls
    Peel-and-Stick Edge Banding 25' Rolls
    From: $14.49

    The easiest possible way to install solid wood edge banding – just peel and stick! No need for an expensive edge bander; bandings are impregnated with a premium 3M peel-and-stick adhesive that creates a permanent bond. The bandings are also pre-sanded and readily accept stains and finishes.…

  • Black Maple Zebrawood Inlay Banding, 3/16'' W
    Black Maple Zebrawood Inlay Banding, 3/16'' W
    $15.99

    …a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Bandings are sold in 36" lengths and are approximately 1/28" thick and 3/16"…

  • Maple Black Mahogany Southwest Inlay Banding, 3/16'' W
    Maple Black Mahogany Southwest Inlay Banding, 3/16'' W
    $15.99

    …a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Bandings are sold in 36" lengths and are approximately 1/28" thick and 3/16"…

  • Solid Wood Edging
    Solid Wood Edging
    3 Review(s)
    $10.19

    Save time and money with edge-banding strips! Thicker, more durable edge allows you to shape the edge using various router bits. Plus, pieces are planed to eliminate having to scrape or sand out saw kerf marks. Solid wood edging is perfect for furniture and other projects where a solid look is…

  • Hot-Melt Edge Bandings   250' Rolls
    Hot-Melt Edge Bandings 250' Rolls
    2 Review(s)
    From: $30.99

    …and finishes. Both solid wood edge bandings and melamine edge bandings are available. 13/16" wide.* Wood edging is made of solid hardwood veneer.* Available in a variety of wood species – some of them difficult to find in edge bandings.* 13/16" wide – perfect for edge banding 3/4" stock.

  • Black Maple Block Inlay Banding, 3/16'' W
    Black Maple Block Inlay Banding, 3/16'' W
    $14.99

    …a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Bandings are sold in 36" lengths and are approximately 1/28" thick and 3/16"…

  • Olson Premium Band Saw Blades-72" blades
    Olson Premium Band Saw Blades-72" blades
    13 Review(s)
    From: $15.79

    The versatility of these hard edge flex back blades is unmatched. Get perfect cuts every time in hardwoods, softwoods, plastic, mild steel, and non-ferrous metals. Blades feature a hard-edge flex back. Available in regular, skip, or hook teeth in 72-inch length for Shopsmith or similar models. Not…

  • Laguna 1412 14'' Band Saw
    Laguna 1412 14'' Band Saw
    1 Review(s)
    $1097.00

    Two years of intensive research and design went into the Laguna 1412, and the result is a band saw of uncompromised quality. Laguna's first offering in the 110V market, the 1412 makes industrial-quality features accessible for woodworkers in home shops and pro shops alike. Laguna's famous…

  • FastCap Quad Edge Banding Trimmer
    FastCap Quad Edge Banding Trimmer
    $19.99

    …easily pulls apart so you can trim one edge at a time, which means you can follow the direction of the grain to minimize tear-out if your edge banding has difficult grain. The two halves of the Quad Trimmer are held together by the friction of two O-rings, which also create a pneumatic spring…

  • Plastic T-Molding Edging-3/4" Wide x 100' Long
    Plastic T-Molding Edging-3/4" Wide x 100' Long
    23 Review(s)
    $43.99

    Use 3/4" molding for plywood, and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different…

  • Plastic T-Molding Edging-13/16" Wide x 100' Long
    Plastic T-Molding Edging-13/16" Wide x 100' Long
    23 Review(s)
    $47.99

    Use 3/4" molding for plywood, and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different…

  • Black Maple Pauamarillo Striped Inlay Banding, 3/8'' W
    Black Maple Pauamarillo Striped Inlay Banding, 3/8'' W
    $16.99

    …a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Bandings are sold in 36" lengths and are approximately 1/28" thick and 3/8"…

  • Deluxe Band Clamp
    Deluxe Band Clamp
    5 Review(s)
    $14.99

    New and improved, our Ratcheting Band Clamp has a permanently attached wrench so it's always ready for use. Check out these other new improvements:* Stitched band eliminates fraying* The belt is stitched and crimped to the clamp so it won't come loose when you're really clamping tight* Permanently…

  • Black Morado Inlay Banding, 1/2'' W
    Black Morado Inlay Banding, 1/2'' W
    $21.99

    …a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly and seal. Bandings are sold in 36" lengths and are approximately 1/28" thick and 1/2" wide. Sold in…

  • VideoEase CATV Balun II
    VideoEase CATV Balun II
    $61.79

    …the higher the frequency, the more signal loss you may encounter.VideoEase CATV Baluns support channels CATV 2-150, VHF 2-13 and the FM broadcast band. Maximum distance is 330 feet (100m) via Cat. 5. twisted-pair cable, depending on frequency. Baluns include a built-in male "F" connector for coax…

  • Carter Accuright® Log Mill™
    Carter Accuright® Log Mill™
    3 Review(s)
    $139.95

    Turn your bandsaw into a sawmill and save money by cutting your own lumber!* Easy to use and quick to set up* Uses the miter slot on your bandsaw for accurate cuts* Resaws ordinary logs into any desired thickness * Sled system that uses the miter slot in your bandsaw to cut and square raw wood logs*…

  • Bandsaw Duplicating Pin
    Bandsaw Duplicating Pin
    8 Review(s)
    $8.99

    …easily; just secure it to your guide block/bearing studs with the included hardware assortment. See "MORE INFO" tab for more detail about compatible band saws* Easily attaches to the following bandsaws: Jet 12" and 14", Delta 14", General 14" & 15" and Powermatic 14". Also fits saws that use the…

  • Olson® Cool Blocks® for Band Saw
    Olson® Cool Blocks® for Band Saw
    4 Review(s)
    From: $16.79

    Improve your band saw performance with the blade guide blocks recommended by professionals! Cool Blocks replace your standard upper and lower side blade guides, allowing blades to run cooler, quieter and last longer.* Four guide blocks per set.* Made from non-metallic composite material. * Made in…

  • African Mahogany by the Piece-3/4" Thickness
    African Mahogany by the Piece-3/4" Thickness
    4 Review(s)
    From: $8.49

    …brown with age. The grain varies from straight to curly, sometimes producing highly attractive figures. Flat-sawn boards feature wavy horizontal bands. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for…

  • Ceramic Guide Blocks for Bandsaws, 4-Pack
    Ceramic Guide Blocks for Bandsaws, 4-Pack
    1 Review(s)
    $24.69

    …Delta or Jet Band-Saws.* #26687 - Guide Blocks for 14" Delta Band Saws: Includes three blocks that are 1/2" x 1/2" x 7/8" and one angled block that is 1/2" x 1/2" x 1-3/8"* #26696 - Guide Blocks for 14" Jet Band Saws: Includes four blocks that are 1/2" x 1/2"…

  • MagSwitch Resaw Guide Attachment
    MagSwitch Resaw Guide Attachment
    $25.49

    …fast, strong set up anywhere on a steel table or cast Iron fence. Angled Infeed/Outfeed to allow for blade drift adjustment. Ideal for resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support. Technical Details:* Product Dimensions: 4" x 8-1/2"* Low profile…

  • 14'' Band Saw Wheel Brush
    14'' Band Saw Wheel Brush
    $10.19

    Improve the performance and reliability of any 14" band saw.* Extends tire life and improves blade tracking. * Mounting plate measures 1" high x 1-1/16" wide.* Fits Delta, Jet and similar model 14" band saws.

  • Blade Lubricant Stick
    Blade Lubricant Stick
    4 Review(s)
    $8.49

    …and wax helps protect blades from heat damage and clogging because of the accumulation of wood, pitch and metal chips. Excellent performance on band saw, scroll saw and coping saw blades. Technical Details* Use on metal, plastic and wood cutting blades* Helps prevent clogging* Reduces heat - extends…

  • Mag-Dro Magnetic Caliper Base
    Mag-Dro Magnetic Caliper Base
    1 Review(s)
    $10.49

    …Base adheres to any ferrous surface, and clamps to the shaft of your dial caliper, allowing you to use it as a basic setup gauge on table saws, band saws, drill presses and more. Also great for checking runout on blades and bits. Technical Details:* Check for runout on blades or bits or use it…

  • Items 1 - 24 of 298
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X