Search results forDrills

  • Items 1 - 24 of 840
  • Page:
    1. 1
    2. 2
    3. 3
  • Drill Guide w/ bit, Metal (CVRI-DG)
    Drill Guide w/ bit, Metal (CVRI-DG)
    1 Review(s)
    $50.49

    Drill guide and bit indented for use with the CVRI series valet rod. You are guaranteed a perfect fit!

  • JIG IT® Drill Guide
    JIG IT® Drill Guide
    17 Review(s)
    $16.39

    The exclusive JIG IT® Drill Guide can be used with a drill press or a hand drill to ensure perfectly aligned holes every time! Use with our Long Shank Forstner Bits (sold separately) to drill flat-bottomed holes.

  • 1/2" Tenon-Lok™  Dovetail Drill Bit
    1/2" Tenon-Lok™ Dovetail Drill Bit
    2 Review(s)
    $25.49

    …Dovetail Drill Bit: 1. Drill a standard 1/2" round mortise with a forstner bit or another bit of your choice. 2. Chuck the 1/2" Tenon-Lok™ cutting tool in your drill. 3. Before starting the drill, position the Tenon-Lok™ cutter all the way at the bottom of the mortise. 4. Start drilling

  • DeWalt® 1/2'' Spade Handle Drill
    DeWalt® 1/2'' Spade Handle Drill
    $194.99 $169.99

    SAVE 13%

    …(0-550 RPM) reversing switch for excellent drilling control.* 9.0 amp, 120 volt motor provides enough power for any shop application. With soft-grip handle, two-position rear spade handle and three-position side handle for greater control for all drilling and mixing applications.* 1/2" chuck size.*…

  • DeWalt DCK265L 18V Compact Li-Ion Drill/Impact Combo Kit
    DeWalt DCK265L 18V Compact Li-Ion Drill/Impact Combo Kit
    1 Review(s)
    $279.00

    The ultimate drilling and driving package! Experience the quality of a 1/2" compact drill with 350 unit watts out and an impact driver that delivers 1,330 inch pounds of torque at operating levels from 0 to 2,400 RPM to perform a wide range of fastening applications. Also included are two compact…

  • Hex Shank Tapered Plug Cutters-Hex Shank Tapered Plug Cutters
    Hex Shank Tapered Plug Cutters-Hex Shank Tapered Plug Cutters
    18 Review(s)
    From: $14.99

    …3/8" and 1/2" plug sizes. With 1/4" hex shank on all cutters to fit quick-change chuck (sold separately). The Plug Cutter is intended for use on a drill press or similar stationary machine. Hex shank can be used in keyed, keyless and quick-change chucks. Features:* Made from heat treated steel for…

  • Hinge Cup Drilling Jigs
    Hinge Cup Drilling Jigs
    6 Review(s)
    $7.69

    Here's an accurate and inexpensive way to set up your drill press for making holes for 35 mm and 26 mm cup hinges. Simply align your fence with the jig and drill. You'll get consistently accurate holes set to the proper depth and the ability to position quickly and easily! Hinge Cup Jig A is used on…

  • Phenolic Table Saw Insert Kit
    Phenolic Table Saw Insert Kit
    31 Review(s)
    $31.99

    …hard for optimum durability and provides friction-free sliding. It's so hard that traditional drill bits have a hard time getting through. No problem! Just use our exclusive Phenolic Countersink Drill Bit (34423, sold separately) for the leveler holes. It is machined especially for phenolic, cuts…

  • 7-Pc. Forstner Bit Set
    7-Pc. Forstner Bit Set
    26 Review(s)
    $34.49

    …pocket holes, hardware installation and more! Set has 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" bits with 3/8" round shanks. Use with a drill press or hand drill. Technical Details:* Presharpened bits are ready to use in any type of wood* Cut precision flat bottomed holes with exceptionally smooth…

  • Portable Drill Guide
    Portable Drill Guide
    14 Review(s)
    $52.99

    …to a 3/8" drill chuck, and allows you to drill larger pieces you can't fit on your stationary press. Pre-drilled holes allow you to attach a base or mount it to a table. Technical Details* Turns your portable drill into a portable drill press* Sets up in seconds for hand-held drilling of accurate…

  • Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits
    Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits
    22 Review(s)
    From: $7.99

    Tapered drill bits and countersinks are made of high-quality high speed steel (HSS). Both tapered bits and countersinks are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits…

  • Porter-Cable 58-Piece Drill and Driver Accessory Set
    Porter-Cable 58-Piece Drill and Driver Accessory Set
    3 Review(s)
    $24.99 $12.50

    SAVE 50%

    …of the cost! Porter Cable has pulled together a truly useful kit here, combining 46 commonly used driver bits with an eight-pack of black oxide drill bits, a pair of magnetic drive guides and more, all packed neatly into a convenient hardshell carrying case. Bring it along on your next jobsite,…

  • Big Gator V-Drill Guide - Standard
    Big Gator V-Drill Guide - Standard
    2 Review(s)
    $24.99

    …a hand drill. The precisely milled V-groove in the bottom of the drill guide centers the holes on pipes, dowels, and outside corners, while the flats allow 90° drilling into flat surfaces-just clamp and drill. 17 standard imperial drill sizes match those in a standard 3/8" drill index-everything…

  • JIG IT® Shelving Jig w/Self-Centering Bit
    JIG IT® Shelving Jig w/Self-Centering Bit
    187 Review(s)
    $36.99

    …self-centering bits! Additional Self-Centering Bit sizes available separately. * Drills holes either 1-7/16" or 2-1/2" from edge. * Insert shelf pin in top or bottom position to extend jig for continuous drilling.* Shelving Jigs measure 20" long* Provides exact set back for shelf pin…

  • Festool T 15+3 Cordless Drill Set
    Festool T 15+3 Cordless Drill Set
    $585.00

    …chucks! With FastFix chucks, you'll seamlessly change a keyless chuck drill into a right angle drill or an offset drill. The FastFix right-angle chuck is the ultimate solution for close quarters hole or fastener placement. Drill or drive between studs, joists, cabinet or drawer spaces, or virtually…

  • Standard High Speed Steel Brad Point Drill Bits-Standard  Brad Point Bits
    Standard High Speed Steel Brad Point Drill Bits-Standard Brad Point Bits
    17 Review(s)
    From: $3.99

    These HSS standard brad point bits are ideal for doweling and other precision hole boring in softwood, hardwood and plywood. You'll get a clean cut without tear-out! All bits are precision-ground high speed steel (HSS). With angled cutting spurs that cut quickly and produce a clean, precise diameter…

  • Rockler Insty-Drive 18 Piece Self-Centering & Countersink Set
    Rockler Insty-Drive 18 Piece Self-Centering & Countersink Set
    32 Review(s)
    $78.99 $49.99

    SAVE 37%

    …self-centering bits; Rockler's Insty-Driver; 10 of the most popular drive bits; and a nylon pouch with belt loop. * Switch from drilling to driving instantly!* Just drill the pilot hole, slip on the Insty-Driver and drive home the screws.* Components are engineered to meet the highest standards for…

  • Oneway Live Center
    Oneway Live Center
    1 Review(s)
    $130.19

    …center points and as a spindle stop when attaching and removing cones.* Includes #2 Morse Taper Note: If turning outside the capacity of the provided cone, a user specific support can be made by drilling a hole in a blank, attaching it to the live center and turning it to suit your requirements.

  • Festool C 15 Cordless Drill
    Festool C 15 Cordless Drill
    $460.00

    …Resellers. Festool's C 15 14.4 V Cordless Drill delivers more power than ever and comes with all the great features of the legendary C series cordless drills! You'll first notice its unique compact footprint. Festool designed the C-series drill to be light, compact, and with excellent balance.…

  • Big Gator V-Drill Guide - Metric
    Big Gator V-Drill Guide - Metric
    $24.99

    drill holes in round stock, flat stock, and even directly into corners-all with just a hand drill. The precisely milled V-groove in the bottom of the drill guide centers the holes on pipes, dowels, and outside corners, while the flats allow 90° drilling into flat surfaces - just clamp and drill.

  • Festool SysLite LED Work Lamp
    Festool SysLite LED Work Lamp
    $175.00

    …flip-out hook, or you can thread it onto a tripod. Plug it in with the included cord, use the internal battery, or use another battery from a Festool drill for up to 4-1/2 hours of battery life. Technical Details:* Features six high-intensity, no-heat LEDs with 170 degrees of light dispersion.* Cool…

  • Mortise Chisel Bit 1/2"
    Mortise Chisel Bit 1/2"
    $27.59

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 1/2 mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

  • Drill Guide Kit
    Drill Guide Kit
    19 Review(s)
    $15.49

    Drill straight and true holes every time with the Drill Guide Kit. The drill guide kit allows you to insert a steel bushing into the plastic guide so you can drill perfectly perpendicular holes. An ingenious design also centers your drill bit on edges. The drill guide kit also works to drill holes…

  • 3-Row Ball Bearing Heavy-Duty Stand
    3-Row Ball Bearing Heavy-Duty Stand
    12 Review(s)
    $139.99

    …Three rows of eight 5/8" diameter steel balls let you move your stick in either direction* Ideal for use with tablesaws, planers, sanders, and drill presses* Adjustable height from 28-3/4" to 44" to give you perfect alignment with the surface of your tool* Folds to 18" x 48" x 7" for convenient…

  • Items 1 - 24 of 840
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X