Receive Free Shipping Every Day on Orders of $35 or More. Click Here to Learn How!
Receive Free Shipping Every Day. Click Here to Learn How!
Cart

Self-Adhesive Measuring Tape Zoom

Self-Adhesive Measuring Tape

product name price quantity total
Left-to-Right, Self-Adhesive Rule, 6 Ft. Length Item #: 69116
In Stock
 
$9.99

Each 		$9.99
Find in Store
Right-to-Left, Self-Adhesive Rule, 6 Ft. Length Item #: 69124
In Stock
 
$9.99

Each 		$9.99
Find in Store
Left-to-Right, Self-Adhesive Rule, 6 Ft. Length Item #: 69116
In Stock
 
Price:
$9.99
Each
Quantity:
Total: $9.99

Find in Store
Right-to-Left, Self-Adhesive Rule, 6 Ft. Length Item #: 69124
In Stock
 
Price:
$9.99
Each
Quantity:
Total: $9.99

Find in Store

Overview

This adhesive-backed measuring tape is ideal for miter saws, radial-arm saws, drill presses or anywhere you need accurate, easy-to-read measurements. Tape is 6' long and available in both left-to-right and right-to-left orientations.


Features:
  • 1/2" wide x 6' long
  • Peel-and-stick adhesive-backed steel
  • Graduated in increments of 1/32" on one side and 1/16" on the other
  • Available in left-to-right and right-to-left orientations

What's included

(1) Self-Adhesive Measuring Tape

Technical Details

  • Length: 6 ft

Questions and Answers

Powered by TurnTo
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 66 answers
Why did you choose this?
Rockler Store
I recently bought a radial arm saw, it seemed to be the best stop block system.
Mike G on Jul 18, 2017
for a table sled
Helen R on Apr 22, 2017
I recently bought a radial arm saw, it seemed to be the best stop block system.
Mike G on Jul 18, 2017
For my chop saw station.
Brian S on Apr 26, 2017
for a table sled
Helen R on Apr 22, 2017
Making a product measurement fixture.
Carl R M on Apr 11, 2017
I bought this to replace a worn tape on my table saw.
Peter F on Mar 27, 2017
Projects
Craig B on Mar 25, 2017
The adhesive used for the ruler is not strong enough.
manuel g on Mar 24, 2017
To make a tenoning jig.
Nicklas C on Mar 17, 2017
For a 45 degree gig I made
JOHN O on Mar 15, 2017
Shop built miter table
Jason T on Mar 6, 2017
Need the tape for a Radial Arm Saw.
Tim M on Mar 1, 2017
I need it for the right side of my chop saw.
Thomas N on Feb 24, 2017
Replacement
BEN S on Feb 12, 2017
I needed another placement for a sticky measurement.
Richard W on Feb 9, 2017
need for jig I made.
Bill A on Jan 25, 2017
To put up on the edges of shelving that holds different lengths of wood. No need now to constantly use the tape measure!
Tex L on Jan 24, 2017
need tape for miter saw
Ralph327 on Jan 17, 2017
Replace the measuring tape on my table saw
David D on Jan 15, 2017
I bought the track without the measuring tape and decided it would be better with the tape
Joyce D on Jan 8, 2017
Am in need of a replacement.
Dennis N on Dec 27, 2016
I'm building my first table saw work bench, and I need this to measure with for my fence.
Stephen V on Dec 16, 2016
ALL PER SON REQUEST FOR CHRISTMAS
RODGER J on Dec 13, 2016
Miter saw station build.
Kevin N on Dec 13, 2016
For Radial Arm saw
Charles R on Nov 19, 2016
To replace the damaged rule on the table saw.
Al. B on Oct 27, 2016
Making a jig
BARRY F on Oct 19, 2016
easy to read
Scott J on Oct 5, 2016
For the track.
Michael G on Sep 26, 2016
Needed it.
Frederick F on Aug 28, 2016
Jig
Regina G on Aug 23, 2016
For my miter saw extension
Bret R on Aug 21, 2016
panel saw and sled use
Ronald T on Aug 14, 2016
Like to know what is where on a project
DICK O on Jul 24, 2016
needed it
tom r on Jul 11, 2016
Chop saw station
COremodel on Jun 18, 2016
Rockler is the only one I know that carries them, I use on my cutoff saw.
Thomas O on Jun 16, 2016
good to be able to make quick accurate cuts.
RICK D on Jun 1, 2016
needed it to replace whorn out one
John F on May 25, 2016
rubbed off table saw cleaning rust off
warren k on May 16, 2016
need it for my lathe
Kevin S on Apr 29, 2016
Building a miter saw station with stop blocks on both sides of the saw.
John H on Apr 21, 2016
finish a project
Gary B on Apr 20, 2016
put above the Universal T-track for my stop on miter saw without having to mark the wood
Marc G on Mar 23, 2016
I purchased the right and left tapes to use on my miter saw table to set the stops without having to measure every time.
Al P on Mar 16, 2016
Used this on my old tablesaw, to replace an old worn out one
Jim F on Mar 10, 2016
I'm going to use in on a miter fence I made
Thomas S on Feb 25, 2016
workshop jigs
Greg W on Feb 8, 2016
for shop use
chris m on Feb 3, 2016
I am building a router table extension.
E Chris H on Feb 1, 2016
for jigs and fixtures
Donald B on Jan 20, 2016
For my chop saw station.
Brian S on Apr 26, 2017
Making a product measurement fixture.
Carl R M on Apr 11, 2017
Is this tape flat? I'm looking for a curved tape to replace the worn one on my VEGA table saw fence.
rick r on Oct 24, 2015
BEST ANSWER: I just replaced the rule on my Vega fence with this tape and it works ok. I have had no problems with it not holding to the round stainless pipe the fence rides on.
given this rule & have never used one, how do I install it to quilting table to extend miter square?
Thanks Sharon
Sharon M on Jun 24, 2017
BEST ANSWER: This tape has a good adhesive backing and will stick to most surfaces, so be careful! If you want to use it as an extension to an already existing rule, you can cut it at any point with a sharp pair of scissors.
I would draw a line with a straightedge extending out from your miter square and then use that as your guide to installing the tape.
What material is the tape made of. I am replacing these on a Unisaw. The fence does not have teflon glide material on the rail or fence. will it work for this application?
Phil W on Nov 30, 2016
BEST ANSWER: Tape is metal with very durable paint and markings. The tape should work for your application. I've applied the tape on an old Craftsman rail as a replacement and also along the front edges of a few work benches. All get heavy use and they hold up extremely well even after ten plus years of abuse.
Will this work on the Kreg Top Trak?
Patrick T on May 22, 2016
BEST ANSWER: I use on both metal and wood workbench tops. One has been on for nearly ten years you neither peeling nor damage. If the width of the Kreg is more than the tape width then it should work. At the price of the tape it worth trying...
Will this tape adhere to a wood surface? ie; A very shallow groove on a drill press table
Robert M on Jan 13, 2016
BEST ANSWER: Yes, but make sure you press the tap as you unroll it. This will make sure you will keep the tape flat as you unroll it.
looking for 12' adhesive measuribg tape instead of 6'?
Gary R on Jul 29, 2015
BEST ANSWER: I'm sorry we do not have a 12' length to offer and we are unable to supply.

Reviews

Powered by TurnTo
4.3 / 5.0
46 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
28
12
2
0
4
 I ordered these because I had...
 I ordered these because I had a bad experience with adhesive tape measures from another company. I found these had similar problems: They are not accurate or precise. I compared the tapes against steel rules and measuring tapes I own and found that the inches vary in size by as much as 1/32 and some internal marking are wrong e.g. the half inch mark is not halfway between the inch marks.
July 11, 2012
I've used both the Left-to-Right and...
I've used both the Left-to-Right and Right-to-Left, Self-Adhesive Rules. I was very happy with both. The adhesive has held through a wide range of temperatures and the rules are easy to read. So far, I've had no problems whatsoever with these.
January 4, 2008
I purchased both right to left...
I purchased both right to left and left to right for use on my miter saw table. The adhesive holds them to the surface extremely well.
August 29, 2009
I've used both the left and...
I've used both the left and right Self-Adhesive Rules and have been extremely pleased with how easy they were to apply and read. They are very durable as well. Although a little expensive, my opinion, I haven't found them anywhere else at a better price. Highly recommend.
November 24, 2008
Build a new router table, and...
Build a new router table, and installed tape, WORKS LIKE A CHARM !!! Thank you !!!
January 3, 2009
Tape used for Table Saw Sled
I router a 1/6" groove to accept tape on sled for flush fit and it would not interfere with material.
It came out very good!
Table Saw Sled Flush fit with routered channel.
Table Saw Sled
March 2, 2016
Purchased
 1 year ago
Woodworking Experience:
Intermediate
I applied the tape to a...
I applied the tape to a new front fence rail that is on my tablesaw. It went on easily and has stayed securely in place. The read out is easy to see and the staggered measurements make it easy to find length quickly. I'll use this product again for my next saw restoration project.
April 25, 2008
Exactly what I asked for and fast service as well
March 1, 2016
Purchased
 1 year ago
Excellence in accuracy
Very accurate have several in use
December 31, 2015
Purchased
 1 year ago
Love the product, works well easy...
Love the product, works well easy stick on. Build my own shingle shear and the customers like the ruler.
April 27, 2008

More Suggestions

Feedback X