Overview
Create a beautiful box liner in minutes. High quality velvet in deep luxurious colors makes a scratch-free box liner. Self adhesive backing. Approximately 1/32" thick. 3 easy steps to apply: Cut to size; remove peel and stick backing; burnish with roller.
Frequently Bought Together
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 17 questions
Browse 17 questions
and 97 answers
Why did you choose this?
Rockler Store
Better quality than felt.
Glendon N
on Jun 13, 2018
Rockler's adhesive velvet is easy to apply and really dresses up any box. I have been using it for years and this velvet really adds a "wow factor" to interior of your box. If you haven't used it, try it. You will love it as much as I do.
Blake W.
on Jun 3, 2018
Better quality than felt.
Glendon N
on Jun 13, 2018
Regular fabric is to sensitive to adhesives. Fabric disolves.
Gary H
on Jun 4, 2018
Where can I find this in a wider sheet (need a piece at least 14"x14")?
BEST ANSWER: For bigger projects, I cut two pieces and align them along the edge. I paint the substrate the same color as the velvet. I use the factory edge along the seam and my cut edge along the edge of the workpiece, where it is usually hidden or at least not too noticeable.
- Reply
- Inaccurate
- John H on Nov 26, 2016
- Purchased on Jan 31, 2015
I need the wine colored adhesive velvet but I don't see it listed anymore. Can Rockler still get wine colored if not please suggest a location for me? Thank you
BEST ANSWER: I've also entered this same question. I checked the answer given just now and could not find said velvet at Amazon. Black is available via Amazon/Rockler. The only place I've found and purchased PSA velvet with a wine color (but not quite dark enough) is from Eagle. However, its quality is doesn't measure up to what is available at Rockler and isn't adequate for my boxes.
- Reply
- Inaccurate
- Ronald L on Nov 12, 2015
- Purchased on Sep 2, 2014
I'd like to just roll this out and use it to line a few shelves of a curio cabinet. Will it stay in position on a wood shelf? Do it have a nice look ? Thank you!
BEST ANSWER: Yes it will stay in place. The adhesive is very good on the under side. However when putting it down make sure you start out straight as possible. Otherwise you will have to pull it up and that begins to make things difficult. You can pull it initially but not a lot of it if it is long.
- Reply(1)
- Inaccurate
- Donald D on Nov 8, 2015
- Purchased on Mar 2, 2015
Can this be used on foam?
BEST ANSWER: Yes. The adhesive used on this velvet is a very aggressive pressure sensitive type adhesive. It should stick very firmly as long as the foam surface was dry and oil free. However, due to the aggressive nature of the adhesive, attempting to remove or reposition the velvet might damage the underlying foam. Good luck.
- Reply
- Inaccurate
- Stephen P on Sep 1, 2015
- Purchased on Sep 3, 2014
Can u glue paper on to the top of this velvet?
Thanks
Janet
Thanks
Janet
BEST ANSWER: I imagine if you use the correct glue you could. I am not sure how smooth it would turn out. Your purpose for doing this would be your choice if it would be acceptable.
- Reply
- Inaccurate
- Kathy D S on Dec 15, 2016
- Purchased on Mar 13, 2015
The pictures look rough and grainy. Is this really smooth Velvet with an elegant look typical of jewelry box lining?
BEST ANSWER: This velvet is soft and consistent in texture. The photos here make it look like it is styrofoam or something...it is not. I use this frequently...it is a fabric with an adhesive backing. The velvet surface is very similar to velvet you will find in the fabric store, except maybe not as plush of a pile. When placed into a box, it gives it a nice soft rich feel and it adheres wonderfully!
- Reply(1)
- Inaccurate
- JOHN M on Feb 9, 2017
- Purchased on Nov 29, 2016
Does this have finished edges or does it need to be folded for the top exposed edge?
BEST ANSWER: My application didnt have any exposed edges. But I looked at an extra piece I had and it seems to be a solid color just like your normal craft felt. This stuff is so thin that I don't think you'd be able to notice If there was a slight color difference. And if there was, you could take a permanent marker to it before applying it...depending on your color, mine was black. Good luck!
- Reply
- Inaccurate
- Teresa N on Mar 21, 2016
- Purchased on Feb 2, 2015
Is the rose color a dusty or light pink color? I'm trying to match behrs bridal rose paint
BEST ANSWER: I did not buy the rose color so I don't know.
- Reply
- Inaccurate
- Richard M on Dec 22, 2017
- Purchased on Dec 25, 2015
Is this felt? The pictures of the product do not look like velvet. Thanks in advance.
BEST ANSWER: Though it is difficult to see in photos, this product is indeed velvet. It comes in a roll with an adhesive backing, just cut, peel, and place. Then rub your hand back and forth across to make sure it has a good contact with whatever you are attaching it to. Great stuff!
- Reply
- Inaccurate
- JOHN M on Jan 15, 2016
- Purchased on Mar 19, 2015
How thick is this material?
BEST ANSWER: The material with peal-off backing measures 1/16 th inch. I used it to line a jewelry box I made and both the recipient and I were quite pleased with the results. Hope this helps?
Mike
Mike
- Reply
- Inaccurate
- mike d on Jan 25, 2017
- Purchased on Apr 4, 2015
Can I put it on top of glass table and if so would it be easy to remove?
BEST ANSWER: I applied this to wood but I think it would apply to glass pretty easily. As far as removing, again I didn't apply it to glass but I think it will stick pretty aggressively compared to wood but I'm sure you would be able to remove it with a little work then clean the adhesive off the glass with a solvent or mineral spirits.
- Reply
- Inaccurate
- John H on Jul 16, 2016
- Purchased on Mar 2, 2015
are the sheets a full 12 x 24 inches
I have a cabinet that has 70 small drawers that are 2.75"w X 7" deep & 6 drawers that are 4.75"w X 7" deep. How many pieces of velvet liner do I need to purchase from if velvet liner is 12" X 24" per roll.
BEST ANSWER: The short answer is that you will need SEVEN rolls. You can get 11 pieces 2.75 x 7 from one roll with a little waste. Five rolls will give you 55 pieces. You can get 7 pieces 2.75 x 7 AND 4 pieces 4.75 x 7 from another roll and 8 pieces 2.75 x 7 AND 3 pieces 4.75 x 7 from another roll. So total is exactly what you want from 7 rolls. Hope this helps.
Mike
Mike
- Reply
- Inaccurate
- mike d on Mar 3, 2016
- Purchased on Apr 4, 2015
Hi, I need a roll of this, but minimum width needs to be 13.5 inches. I am lining a butler's cabinet. Do you have wider rolls?
BEST ANSWER: I am sorry but 12" x 24" is the only size we sell
- Reply
- Inaccurate
- Rick H Staff on Apr 19, 2018
I need to re-cover my heated hair rollers. Will this self adhesive velvet be ok for that as well? Sylvia Desert
BEST ANSWER: Generally, pressure sensitive adhesive, like in this velvet, become gummy and loose their stickiness when they are heated.
- Reply
- Inaccurate
- John H on Nov 26, 2016
- Purchased on Jan 31, 2015
Is this product acid free? I was thinking about trying it in an archival box.
BEST ANSWER: I can't answer. But, I used it to line a jewelry drawer in my wife's dresser and there have not been any negative effects.
- Reply
- Inaccurate
- Beach guy on Jan 28, 2016
- Purchased on Oct 24, 2014
Reviews
4.8 / 5.0
122 Reviews
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
LOVE this product
The velvet is thick, it does not unravel when I cut it into squares, and the navy color really adds a wow factor for our gift. I would HIGHLY recommend buying from them. Shipping was fast and the sheets came over without any crease marks.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Easy to use.
This product was easy to install and the final results were as expected.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Just what I needed; and , it is the perfect size
I am very happy with the product and the rapid response to my order. It will fit my jewelry box perfectly.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Perfect for a novice woodworker
I'd highly recommend this product. I used an X-acto precision craft knife to cut the pieces I needed to rehab an old jewelry box. The adhesive is strong, the velvet looks smooth and sturdy, and there's nothing unsightly about the edges/seams to cover up. Great product for a novice woodcrafter like me!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
This is a high quaity product
I found this product easy to work with and was impressed with its quality. I would definitely recommend it to a friend.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Beige Self Adhesive Liner
I use this product in all of my jewelry boxes. It does a professional job by adding to the beauty of the boxes.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rockler velvet liner
I use the rockler velvet liner for a number of different boxes that I have made. It is excellent quality and easy to cut and apply.
Rockler velvet liner used in billiard ball box
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great for boxes!
I've been using this velvet for many years. In the past I had difficulty fitting it to the bottom of my small boxes. Recently I made several boxes and used a new technique. I cut a template from paper to fit the bottom of each box. I then taped the paper to the velvet and cut the velvet to fit. I used a technique mentioned in the reviews to spray a small amount of Windex to the adhesive which gave me some time to move the velvet in place. It worked great!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
