- Solid brass recessed ring pull.
- Polished finish.
- Actual diameter: 1-13/16".
- Total depth: 1/2"
- Inside diameter of ring pull: 13/16".
- Projection from surface (if surface-mounted): approximately 1/8".
- Can be surface-mounted or mortised flush with the surface.
- Sold singly.
Installation and Care Instructions:
- Measure and mark hole fixings with a pencil, preferably onto a strip of masking tape that will help to steady the drill.
- Drill a pilot hole as a lead for the wood screw.
- Remember, the included wood screws are made of brass so never overtighten or attempt to drive without a pilot hole, as this can cause them to break off in the wood.
- Occasional use of a damp cloth, and the use of quality wax polish is recommended to maintain the lustre.
1 Review(s)View All
NOT 1-3/4"!!!Posted October 1, 2014
Editor's note: As noted in overview of this offer, actual diameter is 1-13/16". The 1-3/4" is the manufacturer's nominal description.