Overview
New and improved design features 2-1/4" high jaws - a half-inch higher than standard pipe clamps! Ideal for use with our exclusive Bench Block® Pipe Clamp Stabilizers (35359, sold separately) to provide a full 1" engagement with the workpiece on the lower clamp. Add Sure-Foot Plus® Clamp Pads (39897, sold separately) for added protection for your stock. 3/4" ID pipe sold separately.
- Extra-wide 2-1/2" foot provides exceptional stability and prevents tip-over during setup. It won't rock on uneven bench surfaces!
- Higher base raises the pipe 1-1/2" above table to allow for greater handle clearance, so you won't have to position clamp handle off the edge of a bench.
- Clamping face includes holes for mounting pads, cauls, jigs and specialty fixtures.
- Built-in clamp hook eliminates need to "clamp the clamp" when hanging on wall.
- Four-clutch-plate design provides secure, no-slip lock for the tail stock on standard 3/4" black pipe.
- Patent pending.
Tech Spec
| Brand | Rockler |
|---|---|
| Weight (lbs) | 3.1600 |
Reviews
As one famous woodworker said, "You...
Posted April 3, 2009
As one famous woodworker said, "You can never have enough clamps." These fit the bill perfectly. I like the largeer jaws for holding material. They can be made flexible, too, by having different lengths of pipe to put the clamp ends on. I would say a must-have addition to one's "collection" of clamps.
I bought four clamps based on...
Posted March 10, 2009
I bought four clamps based on the clever design and overall high rating. The high feet make them stable and easy to crank. However, I my biggest disappointment was with how much the jaws deflect out of parallel and bow a set of edge-glued boards. In fact, the boards can pop right out of the clamps if you don't clamp them down. I know - put some clamps on top to even out the pressure. OK - but I never had this happen with my Pony clamps.
It is a good design, not...
Posted March 8, 2009
It is a good design, not excellent, but darn good. The cleats for hanging are very nice and work well and these clamps are strong enough for the tough jobs. I'd recommend getting the quick release.If you are gluing up a 12 section of several pieces of wood, there is enough play in the clamps that the wood will dry bowed. If you need that accuracy, use a different clamp.I've got 4 of these clamps, many different lengths of pipe and use them all and often.
Great clamps. Just bought 4 more....
Posted February 16, 2009
Great clamps. Just bought 4 more. Great clamps. You can never have enough of them.
I first bought just the clamps,...
Posted February 3, 2009
I first bought just the clamps, thinking that I would go to my local plumber for the 3/4" pipe. But it turned out he charged significantly more than the zinc-plated pipe from Rockler that are made for the clamps. The clamps are great because they're very heavy duty. I don't bust my knuckles tightening them.
Videos
You may also like
Swipe to see more
