Ball bearing guide keeps your stock running smoothly  Zoom

Exclusive

Rockler Thin Rip Tablesaw Jig

Item #: 36833
$26.99
Each In Stock
Eliminate the danger of pushing narrow strips between the saw and fence!

Overview

This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig into the miter track and locks your setting at the same time. Ball bearing guide keeps your workpiece firmly against the fence for perfect repeatability. Use the graduated scale to fine-tune for extremely thin strips.

  • Note: Ripping thin strips requires the use of a zero-clearance insert, sold separately.
  • The perfect tool for edging, inlay, bent laminations and more.
  • Solid phenolic for durability.
  • Low-profile miter track clamp locks in at any point along the miter track.
  • Also works great on the bandsaw as a single-point fence for cutting curved slats in multiples.
  • Adjusts from 1-3/8" away from your miter track to 5-11/16" away from your miter track, enough for the thinnest rips
  • Measures 5-1/4"W x 8"L.
  • The jig is stationary, while the fence is moved for each cut.
  • Fits 3/4" W x 3/8" D Miter Tracks

Tech Spec

Brand Rockler
Weight (lbs) 1.3200

What's included:

(1) Thin Rip Tablesaw Jig

Reviews

Customer Reviews

104 Review(s)

View All

Thin Rips the Right Way

John Posted February 1, 2014
This jig is indispensable to me. I like it so much I am ordering a second one as my table saw and band saw are not collocated and I got tired of having to go fetch it. Setting this up so the thin strip is on the outside of the blade and not wedged up against the fence and moving the stock and fence each time to register with the wheel on this jig I get totally repeatable cuts. It says table saw but it is even better on the bandsaw for cutting very thin strips to use for inlay. Just a great tool.

My neighbor decided he wanted to...

Guest from Walnut Creek, CA Posted June 1, 2013
My neighbor decided he wanted to build a strip canoe. I had the table saw. I was a little unsure about ripping 20' long red cedar boards into consistent 1/4" strips. Saw this jig and decided - for the cost - it would be worth a try. It worked and worked well. We even had to set it up again later to cut some more 20' boards and the strips came out just like the others.

I have used this several times...

Phillip A from Greenwood, IN Posted November 29, 2012
I have used this several times to rip 1/16" thick strips of hard maple, oak, and poplar with amazing success each time. The stability of the fixture with the table saw fence has resulted in perfect pieces each time. I enjoy using this jig. It works great. I'd highly recommend this item to anyone wanting to cut thin strips accurately.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • Rockler Thin Rip Tablesaw Jig

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X