Durable vinyl-wrapped MDF construction will give you years of use  Zoom

Exclusive

Rockler Trim Router Table

Item #: 43550
$59.99
Each In Stock
Can quickly attach to the edge of a bench, a table, a piece of plywood or any flat surface.

Overview

Get more out of your compact router with a rugged, adjustable Trim Router Table that goes anywhere! A Rockler exclusive, the Trim Router Table features pre-drilled holes on the back that let you attach a clamping strip for quick use on the edge of a bench, a table, a piece of plywood or the tailgate on your truck. Perfect for small applications like routing round-overs, chamfers and small dadoes in your shop or at the job site. Sets up quickly, and it's just as easy to detach your router from the table without tools. Use your router with the included 1/4" thick acrylic base to do freehand work like a standard router. The acrylic base not only provides a wide, level base for freehand work, it's pre-drilled to fit most popular trim routers. Also includes an adjustable fence that's compatible with the Rockler Router Table Dust Port (21528, sold separately).

  • 3/4" x 11-1/2" x 15-1/2" table is made of durable vinyl-wrapped MDF
  • Pre-drilled holes on the back side of the table allow you to attach an auxiliary clamping strip for securing to any work surface
  • The 1/4" thick x 5-3/4" diameter acrylic base is pre-drilled to fit most popular trim routers and has 1-1/2" opening
  • Included T-Knobs let you make quick fence adjustments
  • High-visibility safety bit guard
  • Fits the Bosch Colt, Porter Cable 450 and 7310, DeWalt DW 611 and other popular trim routers – or drill the base to fit your specific router

Tech Spec

Brand Rockler
Weight (lbs) 6.7200

What's included:

  • One Trim Router Table
  • One High-Visibility Bit Guard
  • One 1/4" Thick Acrylic Base
  • One Fence
  • Two T-Knobs

Technical Downloads:

Reviews

Customer Reviews

10 Review(s)

View All

I just started working small pieces...

William M from Stuart, FL Posted February 20, 2013
I just started working small pieces of wood in the shop and was looking for a plan to make a table for my Bosch Colt trim router. After searching the net for awhile I thought of Rockler and looked there. I am so pleased that I did. This is a nice piece of equipment. I ordered the dust shroud with it and am very pleased with the its performance as well. My shop vac hose fits right on it. You won't go wrong with this and the price is cheaper than I could have made a table, fence and router base and dust port. The router base is now a permanent fixture on my router, no reason to remove it since it is better than what came with my Colt. It's easy to take my router in and out of the table, has good fitting pieces, fence is great and working on small pieces of wood just got a whole lot easier! It comes with all the attaching screws you need{fence, dust guard,etc. so no need to order anything else. I made a small fence to fit the shape of my router bit and attached it to the main fence using the screw holes that were for the safety guard. It allowed me to just expose that portion of the bit I needed for the profile I wanted. I am a good customer I admit I am embarrassed that I didn't think of checking Rockler first!

I purchased on sale and I...

Anderson J from Pawtucket, RI Posted December 10, 2012
I purchased on sale and I am very pleased with it. For quick little jobs where my full size table isn't necessary but some better control is helpful over full size hand held router, this little tool fits the bill. I've done some decorative edge molding so far since I have limited number 1/4 bits. Portability is nice. I set the table up with a Bosh Colt router and had no problem! Videos & attachment were helpful. As the retired gentleman reviewer stated, I'm going to have to explore all the possibilities but I am absolutely happy with my purchase thus far. Great tool for the weekender.

easy assembly with one exception

Rick Posted December 15, 2014
The photos enclosed with the package are clear and easy to follow. The only problem I had was the acrylic insert plate. It wasn't perfectly circular so I had to trim it at my oscillating spindle sander. Then it fit just right.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • Rockler Trim Router Table
  • Trim Router Table

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X