Universal Gouge Jig SVD-185 for Tormek T-7 Sharpening System  Zoom

Sale

Universal Gouge Jig SVD-185 for Tormek T-7 Sharpening System

Item #: 18772

Regular Price: $97.00

Special Price $87.30

Each In Stock

Overview

Puts the edge back on "V" and fingernail-shaped tools and gouges with a maximum of 1" width. Also for turning cutters. The jig comprises a tool holder which runs in a sleeve. The tool is aligned with a disc and tightened with a knob screw. There is a washer for wide gouges. The stop ring can be set for a convex bevel with a screw. The tool holder can be set in any position from 0 to 5 with the 5 mm allen key. The setting can be noted on a special recipe label, which is attached to the ferrule. A special pen, which works on these labels is included. For turning cutters there is a shaft with a mounting screw and a 2,5 mm allen key.

Best Used With:

Tormek T-7 Sharpening System.

Click Here to View Instructions:

Tech Spec

Brand Tormek
Manufacturer Part Number SVD-185
Weight (lbs) 0.5600

Technical Downloads:

Reviews

Customer Reviews

3 Review(s)

View All

WS3000 with Tormek SVD-185 amazing results

Virginia D Posted January 10, 2015
I've used the WS3000 for a couple of years now which worked great with "normal" wood working tools. However, I've recently started using lathe and carving tools which left me thinking I was going to have to invest in a whole new sharpening system or continue to spend the better part of a day sharpening the gouges, v tools, and beveled skews on a stone. In less than 30 minutes I had the Work smart tool bar installed, set up the universal SVD-185 jig for a roughing gouge, and gouge so sharp it is a joy to use. If you've never used a roughing gouge sharp enough to leave a surface on cherry that didn't even need sanding, you need this jig. Yes, I said roughing gouge... not skew... blew me away. great tool!

This is an amazing jig! it...

Michael A B from Wichita, KS Posted June 16, 2011
This is an amazing jig! it really simplifies sharpening gouges, skews, etc... Perfect bevels, "scary" sharp every time.

I have the Grizzly 10 inch...

Robert B from Wading River, NY Posted May 8, 2011
I have the Grizzly 10 inch low rpm water cooled sharpener. This jig works perfectly with the grizzly. Very happy with jig, Perfect bevels. Razor sharp.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • Tormek Universal Gouge Jig Review: StumpyNubs
  • Tormek Gouge Jig

What People are Saying:

I have been using Rockler for years, your products are always the best that can be purchased and your prices are very reasonable. Ann you have always done your best to make me feel as though I was your very best customer. Thank you for great service."

- Daniel F.

What People are Saying:

I have been using Rockler for years, your products are always the best that can be purchased and your prices are very reasonable. Ann you have always done your best to make me feel as though I was your very best customer. Thank you for great service."

- Daniel F.
Feedback X