#10 Square Drive Screws

  • Grid List
  • Page:
    1. 1
  • Items 1 - 5 of 5
  • Page:
    1. 1
  1. Powerhead #10 Wood Screws

    Powerhead #10 Wood Screws

    Bonus Offer! Get a FREE #2 Square Drive Head Driver bit with every Package of screws! Put an end to screws that dive below the surface and leave an ugly chipped out hole - PowerHead screws feature a broad, flat head that simply won't pull through. The 9/16" diameter head offers superior holding…

    2 Review(s)
    From: $3.99
  2. Kreg® Stainless Steel Deck Screws

    Kreg® Stainless Steel Deck Screws

    …steel screws are your best bet for long-term protection against corrosion in decking applications. A 10' x 20' deck with 16" on-center joists requires approximately 700 screws. Technical Details* 2" length* Self-tapping tips* Flat bottom heads won't split your workpiece* KTX square drive heads…

    From: $17.99
  3. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    …Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench for all adjustments.

    22 Review(s)
    From: $19.99
  4. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    …Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench for all adjustments.

    22 Review(s)
    $40.49
  5. Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    …countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench for all adjustments. OPTIONAL ACCESSORIES :

    22 Review(s)
    From: $7.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 5 of 5
  • Page:
    1. 1
Feedback X